• Korean Journal of Environmental Agriculture
• /
• v.29 no.1
• /
• pp.54-60
• /
• 2010

We have researched the changes in nutrient content in each phase of fermentation in crops treated with liquefied pig fertilizer, and have determined the best method for applying livestock excrement to cultured crops. In the execution of this experiment, rice was cultivated to full maturity at a paddy field in Jeollabuk-Do Agriculture Research and Extension Services(Jeon-buk series) from 2007 to 2008. The rice plant nitrogen absorption quantity change, according to the growth stages of the cultivated rice, was 20.3% in the rice treated with the liquid pig manure and 22.2% the chemical fertilizer at highest congelation. The chemical fertilizer showed a higher absorption quantity than the liquid manure compost. The nitrogen density at highest congelation was 1.5% in the chemical fertilizer, and 1.8% in the pig manure liquid compost not a significant difference. The stem height at harvest time was 73.8 cm in the crops treated with the liquid pig manure compost. Those treated with the chemical fertilizer, yielded a height of 4.2 cm less than the crops treated with the liquid pig manure compost. The yield was 507 kg/10a in the liquid pig manure compost treated rice, compared with the chemical fertilizer, which showed a value of 1.2% lower. The protein content was 6.3% in the rice treated with the chemical fertilizer, but 6.4% in the rice treated with the liquid pig manure compost. This is not a significant difference. However, the lodging rice plant treated with the chemical fertilizer control showed a protein content of 6.8%, which was even higher than the normal rice. The head rice ratio in the brown rice and the polished rice ended up to be lower in the crop treated with the liquid pig manure than that treated with the chemical fertilizer, Quality, the palatability value, was similar in both groups. The above result indicate that, the effect of liquid pig manure compost corresponds to the effect of chemical fertilizer, when each are scattered uniformly.

• Tuberculosis and Respiratory Diseases
• /
• v.57 no.4
• /
• pp.351-357
• /
• 2004

Background : Paclitaxel is highly beneficial anticancer drug for the treatment of non-small cell lung cancer and has shown remarkable radiosensitizing effect in vitro. We evaluated whether concurrent chemoradiation therapy with weekly paclitaxel (60 $mg/m^2$) could be tolerated and effective in the treatment of locally advanced non-small cell lung cancer (NSCLC). Methods : Twenty-two stage III (IIIA:6, IIIB:16) NSCLC patients were treated with weekly administration of paclitaxel (60 $mg/m^2$) on days 1, 8, 15, 22, 29, and 36 in addition to concurrent radiation therapy of 54 Gy. After the initial phase of concurrent chemoradiation, patients received additional two cycles of consolidation chemotherapy with paclitaxel (175 $mg/m^2$)/cisplatin (75 $mg/m^2$) or paclitaxel (175 $mg/m^2$)/carboplatin (6AUC) every 3 weeks. Results : Overall response rate was 81.8% (18/22) with 9.1% (2/22) of complete response and 72.7% (16/22) of partial response rate. Two patients (9.1%) died of chemoradiation-induced pneumonitis after completion of therapy. In total, grade 3 toxicities included pneumonitis (22.7%), esophagitis (22.7%), neuropathy (13.6%), and neutropenia (13.6%). The median survival time was 15 months and 2-year overall survival were 31.8%. Conclusion : Concurrent chemoradiation therapy with weekly paclitaxel in locally advanced NSCLC showed good local response, but survival rate was not completely satisfactory due to potentially fatal chemoradiation-induced pneumonitis.

• Korean Chemical Engineering Research
• /
• v.53 no.5
• /
• pp.557-564
• /
• 2015

The previous etching, rinsing and drying processes of wafers for MEMS (microelectromechanical system) using SC-$CO_2$ (supercritical-$CO_2$) consists of two steps. Firstly, MEMS-wafers are etched by organic solvent in a separate etching equipment from the high pressure dryer and then moved to the high pressure dryer to rinse and dry them using SC-$CO_2$. We found that the previous two step process could be applied to etch and dry wafers for MEMS but could not confirm the reproducibility through several experiments. We thought the cause of that was the stiction of structures occurring due to vaporization of the etching solvent during moving MEMS wafer to high pressure dryer after etching it outside. In order to improve the structure stiction problem, we designed a continuous process for etching, rinsing and drying MEMS-wafers using SC-$CO_2$ without moving them. And we also wanted to know relations of states of carbon dioxide (gas, liquid, supercritical fluid) to the structure stiction problem. In the case of using gas carbon dioxide (3 MPa, $25^{\circ}C$) as an etching solvent, we could obtain well-treated MEMS-wafers without stiction and confirm the reproducibility of experimental results. The quantity of rinsing solvent used could be also reduced compared with the previous technology. In the case of using liquid carbon dioxide (3 MPa, $5^{\circ}C$, we could not obtain well-treated MEMS-wafers without stiction due to the phase separation of between liquid carbon dioxide and etching co-solvent(acetone). In the case of using SC-$CO_2$ (7.5 Mpa, $40^{\circ}C$), we had as good results as those of the case using gas-$CO_2$. Besides the processing time was shortened compared with that of the case of using gas-$CO_2$.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.9 no.1
• /
• pp.119-132
• /
• 2014

This study analyzed the failure prediction model of the firms listed on the KOSDAQ by considering whether there are embezzlement, malpractice and the largest shareholder changes or not. This study composed a total of 166 firms by using two-paired sampling method. For sample of failed firm, 83 manufacturing firms which delisted on KOSDAQ market for 4 years from 2009 to 2012 are selected. For sample of normal firm, 83 firms (with same item or same business as failed firm) that are listed on KOSDAQ market and perform normal business activities during the same period (from 2009 to 2012) are selected. This study selected 80 financial ratios for 5 years immediately preceding from delisting of sample firm above and conducted T-test to derive 19 of them which emerged for five consecutive years among significant variables and used forward selection to estimate logistic regression model. While the precedent studies only analyzed the data of three years immediately preceding the delisting, this study analyzes data of five years immediately preceding the delisting. This study is distinct from existing previous studies that it researches which significant financial characteristic influences the insolvency from the initial phase of insolvent firm with time lag and it also empirically analyzes the usefulness of data by building a firm's fail prediction model which considered embezzlement/malpractice and the largest shareholder changes as dummy variable(non-financial characteristics). The accuracy of classification of the prediction model with dummy variable appeared 95.2% in year T-1, 88.0% in year T-2, 81.3% in year T-3, 79.5% in year T-4, and 74.7% in year T-5. It increased as year of delisting approaches and showed generally higher the accuracy of classification than the results of existing previous studies. This study expects to reduce the damage of not only the firm but also investors, financial institutions and other stakeholders by finding the firm with high potential to fail in advance.

• Journal of Life Science
• /
• v.28 no.2
• /
• pp.240-246
• /
• 2018

Efferent and afferent sympathetic nerves are closely related to the development of hypertension and heart failure. Catheter-based renal sympathetic denervation (RDN) is implemented as a strategy to treat resistant hypertension. We investigated whether RDN procedure causes inflammatory damage on myocardium in the early phase of sympathetic denervation. Twenty-five female swine were divided into 3 groups: normal control (Normal, n=5), sham-operated control (Sham, n=5), and RDN groups (RDN, n=15). The RDN group was further subdivided into 3 subgroups according to the time of sacrifice: immediately (RDN-0, n=5), 1 week (RDN-1, n=5), and 2 weeks (RDN-2, n=5) after RDN. There were no significant changes in the clinical parameters between the normal control and sham-operated group using contrast-media. In the myocardium, inflammatory cytokines, $IL-1{\beta}$ and $TNF-{\alpha}$ increased at the first week, and then decreased at the second week after RDN. Anti-inflammatory cytokine, IL-10 increased immediately, and then decreased at the second week after RDN. Caspase-1 activity and apoptosis-associated speck-like protein containing a caspase recruitment domain (ASC) expression increased immediately after RDN until the second week. However, nucleotide-binding oligomerization domain, leucine rich repeat and pyrin domain containing protein 3 (NLRP3) expression did not show any significant differences among the groups. The RDN can cause acute myocardial inflammation through activation of caspase-1 and $IL-1{\beta}$. We should pay attention to protecting against early inflammatory myocardial damage after RDN.

• Journal of Animal Environmental Science
• /
• v.10 no.3
• /
• pp.141-154
• /
• 2004

The solar powered water pump is very ideal equipment because solar power is more intensive when the water is more needed in summer and it is very helpful in the rural area, in which the electrical power is not available. The average so]ar radiation energy is 3.488 kWh/($m^2{\cdot}day$) in Korea. In this study, the automatic control logic and system of the water pump driven by the radiation energy were studied, designed, assembled, tested and analyzed for realizing the solar powered water pump. The experimental system was operated automatically and the cycle was continued. The average quantity of the water pumped per cycle was about 5,320 cc. The cycle time was about 4.9 minutes. The thermal efficiency of the system was about $0.030\%$. The pressure level of the n-pentane vapour in flash tank was 150$\%$450 hPa(gauge) which was set by the computer program for the control of the vapour supply. The pressure in the condenser and air tank during cycles was maintained as about 600 hPa and 1,200 hPa respectively. The water could be pumped by the amount of 128kg/($m^2{\cdot}day$) with the efficiency of $0.1\%$ and the pumping head of 10 m for the average solar energy in Korea.

• Journal of Biomedical Engineering Research
• /
• v.19 no.1
• /
• pp.69-80
• /
• 1998

This research was designed to investigate how the exercise program affects paraplegic standing and walking employing functional electrical stimulation(FES). Emphasis was also given to fatigue of major lower extremity muscles induced by different types of electrical stimulation. We applied continuous and intermittent rectangular pulse trains to quadriceps of 10 normal subjects and 4 complete paraplegic patients. The frequencies were 20Hz and 80Hz, and the knee angle was fixed at 90$^{\circ}$and 150$^{\circ}$to investigate how muscle fatigue is related to muscle length. The knee extensor torque was measured and monitored. We have been training quadriceps and gastrocnemius of a male paraplegic patient by means of electrical stimulation for the past two year. FES standing was initiated when the knee extensors became strong enough to support the body weight, and then the patient started FES walking utilizing parallel bars and a walker. We used an 8-channel constant-voltage stimulator and surface electrodes. The experimental results indicated that paralyzed muscles fatigued rapidly around the optimal length contrary to normal muscles and confirmed that low frequency and intermittent stimulation delayed fatigue. Our exercise program increased muscle force by approximately 10 folds and decreased the fatigue index to half of the initial value. In addition, the exercise enabled the patient to voluntarily lift each leg up to 10cm, which was of great help to the swing phase of FES walking. Both muscle force and resistance to fatigue were significantly enhanced right after the exercise was applied every day instead of 6 days a week. Up to date, the patient can walk for more than two and half minutes at 10m/min while controlling the on/off time of the stimulator by pushing the toggle switch attached to the walker handle.

• Journal of Environmental Policy
• /
• v.5 no.1
• /
• pp.45-70
• /
• 2006

China has achieved great economic growth above 9% annual since it changed to more of a market economy system by its reform and open-door policy. At the same time, China has experienced severe ecological deterioration, such as air and water pollutions caused by its rapid urbanization and industrialization. China is now confronted with environmental pollution and ecological deterioration at a critical point, at which economic development in China is limited. Moreover, environmental problems in China have become a lit fuse for social fluctuation beyond pollution problems. The root and background of environmental problems in China, firstly, are its government's lack of understanding of these problems and incorrect economic policies affected by political and ideological prejudice. Secondly, the plundering of resources, 'the principle of development first' which didn't consider environmental sustainability is another source of environmental deterioration in China. In addition, a huge population and poverty in China have increased the difficulty in solving its environmental problems, and in fact have accelerated them. The Chinese government has established many environmental laws and institutions, increased environmental investments, and is enlarging the participation of NGOs and the general public in some limited scale to solve its environmental problems. However, it has not obtained effective results because of the lack of environmental investments owing to the government's limit of the development phase, a structural limit of law enforcement and local protectionism, and the limit of political independency in NGOs and the lack of public participation in China. It seems that China remains in the stage of 'economic development first, environmental protection second', contrary to its catch-phrase of 'the harmony between economic development and environmental protection'. China is now confronted with dual pressure both domestically and abroad because of deepening environmental problems. There are growing public's protests and demonstrations in China in response to the spread of damage owing to environmental pollution and ecological deterioration. On the other hand, international society, in particular neighboring countries, regard China as a principal cause of ecological disaster. In the face of this dual pressure, China is presently contemplating a 'recycling economy' that helps sustainable development through the structural reform of industries using too much energy and through more severe law enforcement than now. Therefore, it is desirable to promote regional cooperation more progressively and practically in the direction of building China's ability to solve environmental problems.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.11
• /
• pp.1409-1416
• /
• 2007

Seven selected commercial pure or refined olive oils were obtained from the market, and their physicochemical properties and volatile characterizations were investigated. Fatty acid profiles of the analyzed olive oils showed oleic $(61.2{\sim}74.7mole%)$, palmitic $(10.2{\sim}16.8mole%)$, linoleic $(9.4{\sim}18.0mole%)$, stearic $(1.9{\sim}3.0mole%)$, palmitoleic $(0.7{\sim}2.4mole%)$ and linolenic acid $(0.5{\sim}0.9mole%)$. According to Hunter#s color measurement, pure or refined olive oils showed $L^*$ value of $92.2{\sim}99.0$, $a^*$ value of $-22.2{\sim}-3.2$, and $b^*$ value of $18.5{\sim}55.0$. Their total phenol contents ranged from 1.9 to $13.3mg/100g$ while ${\alpha}-tocopherol$ content showed $7.91{\sim}13.88mg/100g$. Oxidation stability of the pure or refined olive oils were observed by Rancimat. The induction period ranged from 17.37 to 34.72 hr while their POV were $6.83{\sim}20.31meq/kg$ oil. Electronic nose and gas chromatograph-mass spectrometry with head-space solid phase microextraction were applied to identify and discriminate the volatile compounds and flavors in pure or refined olive oils, respectively.

• Food Science of Animal Resources
• /
• v.29 no.4
• /
• pp.437-444
• /
• 2009

${\gamma}-Aminobutyric$ acid (GABA) producing lactic acid bacteria, Lactobacillus acidophilus RMK567 was cultivated in 50 L of sterilized MRS broth using a fermenter at $40^{\circ}C$ for 24 h. The cell number was increased to $10.04{\pm}0.13$ Log CFU/mL with a growth rate constant (k) of 0.454 generation/h and a generation time (g) of 2.303 h after a lapse of a lag phase (L) of 5.16 h. A total of 487 g of cell paste with 40.5% moisture was harvested with viable cell number of 12.48 Log CFU/g cell paste. The cell pastes after preparation with glycerol, glucose, and polydextrose as cryo-protectants were lyophilized under a vacuum of 84 m torr. A total of 408 g of freeze dried (FD) cell powders were mixed with a commercial strain of Streptococcus thermophilus to prepare of three types FD starter cultures with the viable cell numbers of 12.42 (FDA-GY), 12.60 (FDBGG) and 12.91 (FDC-GP) Log CFU/g. During preservation the FD cultures at -$18^{\circ}C$, the cell viability of the FD starter cultures were rapidly dropped to below 3.24% of the day of storage. No significant difference was found in the cell viabilities among three types of FD starters cultures, but significant difference (p<0.01) was found in storage periods. Yoghurts fermented through FD starter culture of L. acidophilus RMK567 were determined to contain $155.16{\pm}8.53$ ppm, $243.82{\pm}4.27$ ppm, and $198.64{\pm}23.46$ ppm of GABA, respectively. This study shows that GABA production activity of L. acidophilus RMK567 is not affected during the freeze drying process and would be available for commercial production of yoghurt containing high GABA content.