• Journal of Families and Better Life
• /
• v.21 no.2
• /
• pp.175-185
• /
• 2003

The purpose of this study was to investigate whether there is any difference between the dual residence couples and the single residence couples in terms of the situation of child care, development of their child and mother's parenting guilty or parenting stress. Also, this study aimed to explore the variables which influence parenting guilty and parenting stress of dual residence mothers. The 178 mothers of three to eight tear-old participated the survey. Half of them were dual residence mothers and another half were those of single residence. These two groups were matched in terms of the occupation of the mother and the age of the child. Major finding were as follows. 1) Compared with single residence couples, dual residence couples used multiple methods of child care. And they depended maternal families more than paternal ones as a care-giver. They also payed much more for the child care than single residence couples. 2) Children of the dual residence couples did not differ with those of the single residence couples in terms of cognitive and social development. 3) Dual residence mothers had more parenting guilty than those of single residence while these two groups did not differ in terms of parenting stress. 4) While dual residence mother's parenting guilty was significantly related with the amount of information provided by the paternal families, their parenting stress was significantly related with the frequencies of communicating with the husband, the mother's age, the flexibility of time in the mother's work place, the mother's orientation to the career, and the supports of the husband. In conclusion, dual residence families in Korea were not so negative as expected. Furthermore, this study suggests that the parenting difficulties of the dual residence mothers could be decreased by the change of social and economic situations and the psycho-social support of the husband.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.984-987
• /
• 2013

In concept, such as the backup of wired network and disaster prevention network of water treatment measurement and control system, reliability and security of high level of sending and receiving data between the nodes must be ensured in Ad-hoc network construction. Rather than apply the common communication protocols of Ad-hoc network construction during the FA network of closed water treatment facility with the facility of a certain scale is concentrated contrast, and high characteristics of the water treatment system infrastructure, public facilities We have developed a specific protocol another that applies the OTP of communication frame of process control commands and H-ARQ with ZRP by applying the flexibility to time constraints such as precision industrial plants to ensure the safety and property of facility operation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.137-140
• /
• 2013

Conventionally embedded devices used simple operating system (OS); however, the number of embedded devices using Linux as OS is increasing to keep up with hardware's performance improvement and customer's various needs. While embedded devices using Linux can take advantage of expandability, generality, portability, Linux's flexibility nature may cause undesirable overheads because of its increased complexity. One such overhead makes boot stage optimization essential in most embedded systems, where many features are redundant and possible to be removed or reconfigured. This paper applies well-known software optimization technique for Linux's boot stage to an CLM9722 DTK, measures the results, and studies about limitation of such techniques from hardware dependancy on the standard framework of Linux. The booting time from power-on until completion were decreased by 33% approximately.

• Korean Institute of Interior Design Journal
• /
• v.14 no.3 s.50
• /
• pp.114-121
• /
• 2005

Louis 1. Kahn was a wise architect who learned from history. He developed his own unique architecture by combining his creative sense with design principles and vocabularies that can be found in historical architecture. When restricting a space, he surrounded the space with thick walls as it had been done in historical buildings. The interior space encompassed by this method became a center-oriented and stable space. The objective of this study is to find the characteristics of Kahn's interior spaces by analyzing his projects in terms of space, form, daylight and materials. For this purpose, five works that are considered to have significance from the aspect of interior design were selected and analyzed. The characteristics realized through this study are as follows. A) Spatial features: 1) Generally speaking, each required space has been arranged symmetrically. 2) Being clearly defined as the main space, the subsidiary space, or the service space, each space also was placed very functionally. 3) The space encompassed by thick walls became a center-oriented, stable space. And in most case, it was characterized as a dark space. B) Formative features: 4) The space was defined as a basic solid such as a cylinder, a hexahedron, and an octagonal box, and was developed into a complex shape by the recessed windows. 5) Historical vocabularies such as an arch, a vault, and a dome were reinterpreted in new ways by kahn's own eyes. 6) Haying diverse shapes, the skylights enrich the space in terms of form. C) Daylight feature: 7) The vertical light entering through the skylights creates a solemn and mysterious atmosphere. 8) Given the shadows from the windows that change according to time, the interior space becomes a very vivid space. D) Material feature: 9) Harmonized with cold and smooth materials such as exposed concrete, metal, and glass, the interior space provides a modern atmosphere. 10) Warm appearing wood was used for furniture and part of walls or floors. The effective use of wood takes on a role that is quite complementary to the cold ambience of the smooth and cold materials. 11) With flexibility In building shapes, the concrete becomes the form-endowing materials.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.434-436
• /
• 2018

Accidents of commuting vehicles for preschoolers continue to occur despite various safety policies from the government. In order to minimize such accidents, it is necessary to use both the vehicle-mounted safety commutation management software for the driver, and the mobile App to manage the safe schooling of the children that can inform such information to parents in time. In this paper, we describe the design and implementation of the safety management software architecture. The mobile application is designed for Android operating systems. It informs current driving information if the bus as well as the list of current boarded children. Teacher in the bus can manage exceptional cases such as riding child without RFID and unregistered temporary riders like grandparent for convenience and flexibility.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.2A
• /
• pp.191-197
• /
• 2008

For the efficient transmission of burst data in the time varying wireless channel, opportunistic scheduling is one of the important techniques to maximize multiuser diversity gain. In this paper, we propose a distributed opportunistic scheduling scheme for wireless LAN network. A proportional fair scheduling, which is one of the opportunistic scheduling schemes, is used for centralized networks, whereas we design distributed proportional fair scheduling (DPFS) scheme and medium access control with distributed manner. In the proposed DPFS scheme, each receiver estimates channel condition and calculates independently its own priority with probabilistic manner, which can reduce excessive probing overhead required to gather the channel conditions of all receivers. We evaluate the proposed DPFS using extensive simulation and simulation results show that DPFS obtains higher network throughput than conventional scheduling schemes and has a flexibility to control the fairness and throughput by controlling the system parameter.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.9B
• /
• pp.1390-1398
• /
• 2010

We present the concept of applying Wireless Mesh Networking (WMN) technology into Smart Grid, which is recently rising as a potential technology in various areas thanks to its advantages such as low installation costs, high scalability, and high flexibility. Smart Grid is an intelligent, next-generation electrical power network that can maximize energy efficiency by monitoring utility information in real-time and controlling the flow of electricity with IT communications technology converged to the existing power grid. WMNs must be designed for Smart Grid communication systems considering not only the high level of reliability, QoS support and mass-data treatment but also the properties of the traditional power grid. In addition, it is essential to design techniques based on international standards to support interoperability and scalability. In this paper, we evaluate the performance of IEEE 802.11s based Smart Grid Mesh Networks by conducting preliminary simulation studies with the ns-3 simulator. We also outline some challenging issues that should be reviewed when considering WMNs as the candidate for Smart Grid communication infrastructure.

• The KIPS Transactions:PartA
• /
• v.11A no.2
• /
• pp.109-114
• /
• 2004

This paper presents a high-speed bit-parallel systolic divider for computing modular division A($\chi$)/B($\chi$) mod G($\chi$) in finite fields GF$(2^m)$. The presented divider is based on the binary GCD algorithm and verified through FPGA implementation. The proposed architecture produces division results at a rate of one every 1 clock cycles after an initial delay of 5m-2. Analysis shows that the proposed divider provides a significant reduction in both chip area and computational delay time compared to previously proposed systolic dividers with the same I/O format. In addition, since the proposed architecture does not restrict the choice of irreducible polynomials and has regularity and modularity, it provides a high flexibility and Scalability with respect to the field size m. Therefore, the proposed divider is well suited to VLSI implementation.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.04a
• /
• pp.135-138
• /
• 2004

Conventional piezoelectric lead-zirconate-titanate (PZT) senor has high sensitivity, but it is very brittle. Recently polymer films such as polyvinylidene fluoride (PVDF) and poly(vinylidene fluoride­trifluoroethylene) (P(VDF-TrFE)) copolymer have been used as a sensor. The advantages of polymer sensor are the flexibility and mechanical toughness. Simple process and possible several shapes are also additional advantages. Polymer sensor can be directly embedded in a structure. In this study, nondestructive damage sensitivity of single basalt fiber/epoxy composites was investigated with sensor type and thermal damage using AE and oscilloscope. And AE waveform for epoxy matrix with various damage types was compared to each other. The damage sensitivity of two polymer sensors was rather lower than that of PZT sensor. The damage sensitivity of PVDF sensor did not decrease until thermal damage temperature at $80^{\circ}C$ and they decreased significantly at $110^{\circ}C$ However, the damage sensitivity of P(VDF-TrFE) sensor at $110^{\circ}C$ was almost same in no damage sensor. For both top and side impacts, the difference in arrival time increased with increasing internal and surface damage density of epoxy matrix.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.8
• /
• pp.2555-2560
• /
• 1996

Inspecting the dimensional accuracy of a car-body in assembly line is a very important process to assure high productivity. Now there exist two common inspecting methods in practice. One is to measure a sampled car-body with three dimensional measuring machine, and the other is to measure car-body with three dimensional measuring machine, and the other is to measure car-body in assembly line using many sensors fixed to a large jig frame. The formal method takes too long to inspect a sampled car-body of a same sort, and cannot therefore give an useful error trend for the whole production. On the other hand, the latter lacks flexibility and is very cost-intensive. By using industrial robots and sensors, an in-line Car-Body Measuring(CBM) system which ensured high flexiblity and sufficient accuracy was developed. This CBM cell operates in real production line and measures the check points by the non-contact type using camera and laser displacement sensor(LDS). This system can handle about 15 Measuring points within a cycle time of 40 seconds. A process computer controls whole process such as data acquisition file handling and data analysis. Robot arms changes in length due to ambient temperature fluctuation affecting the measuring accuracy. To compensate this error, a robot arm calibration process was developed.