• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.2
• /
• pp.108-116
• /
• 2011

Non-line-of-sight (NLOS) error is the most common and also a major source of errors in wireless location system. A novel weighting factor (NWF) method is presented in this paper, based on the RSS(Received Signal Strength) measurements, path loss model and Circular Disk of Scatterers Model (CDSM). The proposed positioning method effectively weighted the TOA distance measurements for each Base Station (BS). Simulation results show that the proposed method efficiently weighted the distance measurements and achieve higher localization accuracy than that of Linear Line of Position (LLOP) and Believable Factor Algorithm (BFA).

• Advances in nano research
• /
• v.12 no.4
• /
• pp.405-414
• /
• 2022

In this study, the elastic plane problem of a layered composite containing an internal or edge crack perpendicular to its boundaries in its lower layer is examined using numerical analysis. The layered composite consists of two elastic layers having different elastic constants and heights. Two bonded layers rest on a homogeneous elastic half plane and are pressed by a rigid cylindrical stamp. In this context, the Finite Element Method (FEM) based software called ANSYS is used for numerical solutions. The problem is solved under the assumptions that the contacts are frictionless, and the effect of gravity force is neglected. A comparison is made with analytical results in the literature to verify the model created and the results obtained. It was found that the results obtained from analytical formulation were in perfect agreements with the FEM study. The numerical results for the stress-intensity factor (SIF) are obtained for various dimensionless quantities related to the geometric and material parameters. Consequently, the effects of these parameters on the stress-intensity factor are discussed. If the FEM analysis is used correctly, it can be an efficient alternative method to the analytical solutions that need time.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.13 no.2
• /
• pp.34-44
• /
• 2009

Background : Currently, as a method of standardization of prescription, questionnaire for Buzhongyiqi-Tang[補中益氣湯] was developed, and which is a Objectives : The purpose of this thesis is to testify whether differentiation of Lao Juan Shang[勞倦傷] etiology is relative to mobility of gastric smooth muscle. Methods : The subjects(20 to 65 years old; 14 males, 46 females) were isolated from drinking alcohols for 24 hours before the experiment, and fasted for 8 hours, and measured for electrogastrography(EGG) and they filled out Questionnaire for Buzhongyiqi-Tang. Results : 1. Six factors from the factor analysis of Questionnaire for Buzhongyiqi -Tang were named and classified as Spleen-Qi deficiency syndrome factor [脾虛] (factor 1), Lung-Qi deficiency syndrome factor [肺虛] (factor 2), Working factor [習慣] (factor 3), Yin-Fire factor [陰火] (factor 4), Jung-Qi deficiency syndrome factor [中氣虛] (factor 5), and Stomach-Qi deficiency syndrome factor [胃虛] (factor 6). 2. As for the reliability of Questionnaire for Buzhongyiqi-Tang, we used Cronbach's alpha coefficient. Cronbach's alpha coefficient was 0.772 for the mean of the item-total. 3. Lung-Qi deficiency syndrome factor(factor2) had significant correlation with Bradygastria Time (r=-0.312, p<0.05). 4. Working factor(factor3) had significant correlation with Bradygastria Time (r=-0.329, p<0.05). 5. Yin-Fire factor(factor4) had significant correlation with Power Ratio (r=-0.328, p<0.05). Conclusions : It is shown that Bradygastria Time and Power Ratio tended to decrease against postprandial DP increased and postprandial frequency decreased in normal case.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.11
• /
• pp.561-565
• /
• 2004

SiO₂ thin films are fabricated using sol-gel method and dipping method. Gelation time is faster according to increasing the amount of H₂O except H₂O/Si(OC₂H/sub 5/)₄=4. Initial viscosity is highest at H₂O/Si(OC₂H/sub 5/)₄=6. Gelation time is faster according to increasing the amount of CH₃COOH. The relative dielectric constant of thin films decreases a little according to increasing the measuring frequency. The dielectric dissipation factor of thin films increases a little below 100kHz and it increases rapidly over 100kHz.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.4
• /
• pp.57-62
• /
• 2005

Satellite contamination from back-scattered molecules has long been analyzed using the BGK theory or the DSMC technique which are rather inefficient in that they are complicated or take a long time in the analysis. This study presents a new technique of estimating the back-scattering contamination, which is very simple and easy to use like the view factor method and also very accurate. This method, called the modified view factor method, is equivalent to the DSMC in so far as the molecular thermal velocity is much smaller than the satellite velocity and the mean free path much longer than the satellite.

• Structural Engineering and Mechanics
• /
• v.87 no.4
• /
• pp.363-373
• /
• 2023

Since the first family of structure-dependent methods can simultaneously integrate unconditional stability and explicit formulation in addition to second order accuracy, it is very computationally efficient for solving inertial problems except for adopting auto time-stepping techniques due to no nonlinear iterations. However, an unusual stability property is first found herein since its unconditional stability interval is drastically different for zero and nonzero damping. In fact, instability might occur for solving a damped stiffness hardening system while an accurate result can be obtained for the corresponding undamped stiffness hardening system. A technique of using a stability factor is applied to overcome this difficulty. It can be applied to magnify an unconditional stability interval. After introducing this stability factor, the formulation of this family of structure-dependent methods is changed accordingly and thus its numerical properties must be re-evaluated. In summary, a large stability factor can result in a large unconditional stability interval but also lead to a large relative period error. As a consequence, a stability factor must be appropriately chosen to have a desired unconditional stability interval in addition to an acceptable period distortion.

• Journal of Korean Academy of Nursing
• /
• v.43 no.5
• /
• pp.587-594
• /
• 2013

Purpose: The purpose of this study is to provide researchers with a simplified approach to undertaking exploratory factor analysis for the assessment of construct validity. Methods: All articles published in 2010, 2011, and 2012 in Journal of Korean Academy of Nursing were reviewed and other relevant books and articles were chosen for the review. Results: In this paper, the following were discussed: preliminary analysis process of exploratory factor analysis to examine the sample size, distribution of measured variables, correlation coefficient, and results of KMO measure and Bartlett's test of sphericity. In addition, other areas to be considered in using factor analysis are discussed, including determination of the number of factors, the choice of rotation method or extraction method of the factor structure, and the interpretation of the factor loadings and explained variance. Conclusion: Content validity is the degree to which elements of an assessment instrument are relevant to and representative of the targeted construct for a particular assessment purpose. This measurement is difficult and challenging and takes a lot of time. Factor analysis is considered one of the strongest approaches to establishing construct validity and is the most commonly used method for establishing construct validity measured by an instrument.

• The Journal of Korean Medicine
• /
• v.29 no.5
• /
• pp.104-110
• /
• 2008

Objectives : The purpose of this study is to develop the method of selecting representative pulse wave. Methods : The pulse waves were acquired at the right and the left Guan point(關部) with 1420 people who were apparently healthy. The shape agreement of right and left pulse wave and the floating-sinking ratio were compared with three cases, which were the pulse height based method, the pulse area based method, and the pulse time based method. Results : In the point of the shape accordance, the pulse time based method was the best, and the pulse area based method was the worst. In the point of the floating-sinking ratio, the pulse height based method was the worst, and the pulse time based method was the best. Conclusions : So, the pulse time based method was recommended for selecting the representative pulse wave. This study compared the selection methods of representative pulse using the physiological characteristics of pulse wave. Further studies are required, because the representative pulse wave is the main factor of determining the shape and the floating-sinking characteristic of the pulse wave.

• Nuclear Engineering and Technology
• /
• v.53 no.12
• /
• pp.4093-4097
• /
• 2021

This study presents a new dead-time measurement method using the gamma attenuation law and generalized dead-time models for nuclear gamma-ray detectors. The dead-time of the NaI(Tl) detection system was obtained to validate the new dead-time determination method using very thin lead and polyethylene absorbers. Non-paralyzing dead-time was found to be 8.39 ㎲, and paralyzing dead-time was found to be 8.35 ㎲ using lead absorber for NaI(Tl) scintillator detection system. These dead-time values are consistent with the previously reported dead-time values for scintillator detection systems. The gamma build-up factor's contribution to the dead-time was neglected because a very thin material was used.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1359-1361
• /
• 1996

This paper describes a design of real time fuzzy controller using Minimum fuzzy control Rule Selection Method(MRSM). The control algorithm of dynamic systems needs less computation time and memory. To reduce the computation time of fuzzy logic controller, minimum number of rules are to be selected for the fuzzy input variable. The universe of discourse is divided by the number of linguistic labels to allocate the assigned membership function to the fuzzy input variables. In this case, since fuzzy input variables are continuous, scale factor SU is tuned independently. According to increment of SU control surface is improved to adapt the change of system parameter. At this, crisp control surface is increased. With the increament of crisp control surface, fuzzy control surface is reduced. When error state deviates from desirable error state, crisp control surface is more useful than fuzzy control surface for obtaining fast rising time.