• Communications for Statistical Applications and Methods
• /
• 제19권2호
• /
• pp.219-224
• /
• 2012

This article considers the mean time to failure(MTTF) of a dependent parallel system. We study how the degree of dependency components influences the increase in the mean lifetime for this system. The results are illustrated by tables and figures.

• 천문학회지
• /
• 제27권2호
• /
• pp.177-190
• /
• 1994

We have examined the photometric evolution of elliptical galaxies, using stellar evolutionary models covering the wide ranges of metallicity and mass, and the different IMFs (simple IMP & time-dependent bimodal IMF). The model with a time-dependent bimodal IMF can reproduce the observed integrated magnitudes and colors at all wavelengths. The computed model shows that the star formation in elliptical galaxies is still going on, although the number of newly born stars is very small. The chemical evolutionary effect is clearly seen in the C-M diagram of computed elliptical galaxies.

• 대한화학회지
• /
• 제48권6호
• /
• pp.663-666
• /
• 2004

• 음성과학
• /
• 제15권2호
• /
• pp.169-176
• /
• 2008

This study was intended to analyze difference of vocal folds movements between upon wakeup and in several hours later in the morning. The difference of vocal fold movements was compared with fundamental frequency and a range of fundamental frequencies from maximum to minimum. The participants were 30 female adults between 20 and 29 years old. Voice samples were collected from their reading sentence (Jeong, 1993). The first sampling was conducted within 5 minutes after wakeup, while the second on 1 hour after the first sampling. Finally, the third voice sample was collected on 6 hours after the second sampling. The results of this study were as follows: First, fundamental frequency of the participants were by hour significantly time-dependent(F=7.843). Post-hoc multiple comparison (LSD) was conducted to determine when the difference could be observed. The result showed significant differences between upon wakeup and 6 hours later (p< .001) and between 1 hour later and 6 hours later (p< .05). Second, there were a significantly time-dependent ranges of fundamental frequencies of participants by hour (F=3.130). According to the results of the LSD analysis the significant differences in range of fundamental frequencies were found between upon wakeup and 1 hour later and also between wakeup and 6 hours later (p< .05). The results above indicate that vocal fold movements upon wakeup is different from those of several hours later.

• 천문학회지
• /
• 제15권2호
• /
• pp.71-77
• /
• 1982

According to the star formation rate and metal enrichment rate given by the disk-halo model of Lee and Ann (1981), the two different forms of time-dependent initial mass function (IMF) and the present day mass function (PDMF) of nearby stars have been examined. It was shown that the constraint for the initial rapid metal enrichment requires the time-dependence of IMF at the very early phase ($t{\lesssim}5{\times}10^8$ yrs) of the solar neighborhood. The computed PDMF's show that the PDMF is nearly independent of any specific functional form of IMF as long as the latter includes a Gaussian distribution of log m. This result is due to the very small fractional mass $({\times}5%)$ of stars formed at the very early period during which the IMF is time-dependent. The computed PDMF suggests the presence of more numerous low mass stars than shown in Miller and Scalo's (1979) PDMF, supporting the possibility of the existence of low-velocity M dwarfs. According to the number distribution of stars with respect to [Fe/H], the mean age of these low mass star must be very old so as to yield the mean metal abundance $\bar{[Fe/H]}{\approx}-0.15$ for the stars in the solar neighborhood.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1526-1528
• /
• 1996

The dielectric reliability of a polycrystalline and a multilayered $BaTiO_3$ thin films was evaluated using a time-zero dielectric breakdown (TZDB) and a time-dependent dielectric breakdown (TDDB) techniques. The $BaTiO_3$ thin films were prepared by rf-magnetron sputtering technique on ITO-coated glass substrates. In case of the multilayered $BaTiO_3$ thin film, the dielectric breakdown histogram, which was obtained from the TZDB measurements, showed a typical Weibull distribution. While in case of polycrystalIine $BaTiO_3$ thin film, a randomly distributed dielectric breakdown histogram was observed. The TDDB results of the multilayered $BaTiO_3$ thin film guaranteed about $10^5$ hours-operation under the stress field of 1 MV/cm.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.322-327
• /
• 2000

This paper investigates the time-dependent crack growth in X20CrMoV 12 1 steel weld joints. Crack growth test are carried out $545^{\circ}C$ on side-grooved 1/2T CT specimens under static loads. A simulated material is produced for the intercritical HAZ, where fracture normally occurs. Constitutive properties are obtained for the simulated HAZ material as well as for the base metal and weld metal. Finite element analyses of crack growth are performed on the models with and without a HAZ layer, using the experimental crack length-time history. The inclusion of HAZ layer increase the load line velocities significantly. The crack growth rates are correlated reasonably well with $C^*$. The smallest crack size for the validity of $C^*$ is found much smaller than the ASTM crack initiation size for 1T CT specimen of creep ductile materials.

• 한국강구조학회 논문집
• /
• 제12권2호통권45호
• /
• pp.133-142
• /
• 2000

이 연구는 콘크리트 바닥판의 타설방법과 단면형태에 따른 강박스 거더 교량의 거동에 관한 것이다. 단계 타설의 경우 각 타설부분의 시간차이는 바닥판 콘크리트의 응결시간의 차이를 일으키고 이로 인하여 발생되는 교량의 시간에 따른 거동이 이 연구에서 해석되었다. 또한 거더 단면과 바닥판 콘크리트의 타설순서의 상관관계의 관한 연구를 위하여 콘크리트 크리프와 건조수축의 효과가 이 연구에서 제안된 해석모델에 포함되었다. 끝으로 바닥판 콘크리트의 초기 횡방향 균열을 방지하기 위하여 현장에서 관리할 수 있는 콘크리트 슬럼프와 상대습도가 제안되었다.

• 한국정밀공학회지
• /
• 제22권7호
• /
• pp.62-70
• /
• 2005

The nanoindenter and AFM have been used for nanofabrication, such as nanolithography, nanowriting, and nanopatterning, as well as measurement of mechanical properties and surface topology. Nanoscale indents can be used as cells for molecular electronics and drug delivery, slots for integration into nanodevices, and defects for tailoring the structure and properties. Therefore, it is very important to make indents of desired morphology (shape, size and depth). Indents of different shapes can be obtained by using indenters of different geometries such as a cube comer and conical and spherical tips. The depth and size of indents can be controlled by making indentations at different indentation loads. However, in case of viscoplastic viscoelastic materials such as polymethylmethacrylate (PMMA) the time dependent deformation (TDD) should also be considered. In this study, the effect of process parameters such as loading rate and hold-time at peak load on the indent morphology (maximum penetration depth, elastic recovery, transient creep recovery, residual depth pile-up height) of PMMA were studied for hyperfine pattern fabrication.

• 한국구조물진단유지관리공학회 논문집
• /
• 제6권2호
• /
• pp.113-119
• /
• 2002

In the prestressed concrete structures, stresses are gradually redistributed with time due to the creep and shrinkage of concrete and the stress relaxation of prestressed steel. In this study a numerical procedure and computer program is developed to analyze the behavior of prestressed concrete structures considering the time-dependent properties of material. It accounts for the aging, creep and shrinkage of concrete and the stress relaxation of prestressed steel. The structural model uses two dimensional plane frame elements with three nodal degree of freedom and is analyzed based on the finite element method. Member cross section can consist of concrete, reinforcement and prestressing steel. Two different set of equations for the prediction of time-dependent material properties of concrete are presented, which are ACI, CEB-FIP. Analytical studies for different examples of prestressed concrete structures have been performed to demonstrated the capabilities and practical applicabilities of the developed program.