• Journal of the Korean Society of Radiology
• /
• v.15 no.2
• /
• pp.93-100
• /
• 2021

The purpose of this study is to find out the factors that affect the patient's exposure dose during the abdominal CT scan using the bolus tracking technique, and reducing the radiation exposure to the patient during the abdominal CT scan using the bolus tracking technique by adjusting the delay time according to the corresponding factor. The experiment was divided into two parts, and the first experiment was conducted with 300 patients There were 188 males and 112 females, and their average age was 58±12.18(19~85). In the second experiment, 150 subjects (100 males and 50 females) who were undergoing their follow-up examination among the first experiment subjects, and the difference in dose before and after was compared by applying the delay time according to the influencing factor. As a result of the first experiment, there was a relationship between the arrival time of the contrast media and the heart rate, and it was found that the arrival time decreased as the heart rate increased for both men and women. As a result of the second experiment, the average dose of CTDIvol and DLP before/after applying the delay time according to the heart rate decreased 4.98 mGy and 5.33 mGy·cm in the male group, and 3.54 mGy and 3.88 mGy·cm in the female group. By applying proper delay time according to the patient's heart rate during abdominal CT scan with the bolus tracking technique, the radiation exposure dose of the patient can be reduced.

• Korean Journal of Adult Nursing
• /
• v.27 no.1
• /
• pp.83-93
• /
• 2015

Purpose: This study was to investigate the relationship among the symptom recognition, health behavior compliance, and the hospital arrival time to identify factors influencing the hospital arrival time in patient with acute myocardial infarction (AMI). Methods: The subjects of this study were 200 patients with AMI in C hospital in D city. Data were analyzed using descriptive statistics, independent t-test, One way ANOVA, Pearson's correlation coefficients, and stepwise multiple liner regression tests. Results: Level of symptom recognition and health behavior compliance was low. The median value of hospital arrival time was 4.48 hours (ST-segment Elevation Ml was 2.43 hours and Non ST-segment Elevation MI was 7.83 hours). Among the studied factors, only symptom recognition had a statistically significant positive correlation with health behavior compliance (r=0.38, p<.001). Factors influencing the hospital arrival time were MI classification, diabetes mellitus (DM) and transport vehicle to the 1st hospital, and they accounted for 13% of the variance for hospital arrival time in AMI patients. Conclusion: To prevent the delay of hospital arrival time in MI patients, a more robust nursing strategic intervention according to MI classification and DM is necessary; further education on the importance of transportation utilization is also mandated.

• Journal of Korean Academy of Nursing
• /
• v.46 no.6
• /
• pp.804-812
• /
• 2016

Purpose: This research was done to identify the hospital arrival rate and factors related to prehospital delay in arriving at an emergency medical center within the golden time after symptom onset in patients with acute myocardial infarction (AMI). Methods: Data used in the research was from the National Emergency Department Information System of the National Emergency Medical Center which reported that in 2014, 9,611 patients went to emergency medical centers for acute myocardial infarction. Prehospital time is the time from onset to arrival at an emergency medical center and is analyzed by subdividing arrival and delay based on golden time of 2 hour. Results: After onset of acute myocardial infarction, arrival rate to emergency medical centers within the golden time was 44.0%(4,233), and factors related to prehospital delay were gender, age, region of residence, symptoms, path to hospital visit, and method of transportation. Conclusion: Results of this study show that in 2014 more than half of AMI patients arrive at emergency medical centers after the golden time for proper treatment of AMI. In order to reduce prehospital delay, new policy that reflects factors influencing prehospital delay should be developed. Especially, public campaigns and education to provide information on AMI initial symptoms and to enhance utilizing EMS to get to the emergency medical center directly should be implemented for patients and/or caregivers.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.10
• /
• pp.77-83
• /
• 2015

This paper suggests heuristic algorithm to obtain optimal solution of minimum number of delay aircraft in airport arrivals/departures problem. This problem can be solved only mathematical optimization method. The proposed algorithm selects the minimum delays capacity in various airport capacities for number of arrivals/departures aircraft in $i^{th}$ time interval (15 minutes). In details, we apply median selection method and left-right selection method. This algorithm can be get the optimal solution of minimum number of delay aircraft for sixes actual experimental data.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.2
• /
• pp.283-294
• /
• 2018

An accurate pedestrian-delay model is essential for the pedestrian-oriented evaluation of signalized intersection (SI). The crossing behaviors of pedestrians at signalized pedestrian crosswalks (SPCs) are various, and their arrival behaviors consist of two types, random and platoon. It is natural, hence, that the behaviors of pedestrian crossing and arrival should be considered in order to estimate accurate pedestrian delay. Despite this necessity, a simple pedestrian-delay model that cannot explain these behaviors of pedestrian movements is still recommended in Highway Capacity Manual (HCM). For these reasons, a pedestrian-delay model, suitable for various SPCs and SIs, is required to make pedestrian-oriented decisions on the design and operation of various SPCs and SIs. This paper proposes a novel pedestrian-delay model that is based on the behaviors of pedestrian crossing and arrival. The proposed model consists of two sub models: the one for SPC and the other for SI. The SPC delay model was developed based on the behaviors of pedestrian crossing during pedestrian green time. The SI delay model was designed based on the behaviors of pedestrian crossing and platoon arrival. The results of a numerical simulation showed that the proposed delay model can successfully overcome the under- and overestimation problems of the HCM model with explaining various behaviors of pedestrian crossing and arrival.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.4
• /
• pp.174-181
• /
• 2002

In this Paper, we proposed the method for the TIT (Theoretical Inter-arrival Time) was suggested in which it saves the cells by using the data buffer in the system rather than by using one separately from the internal controller, and it also releases these cells saved. The method of TIT complements the defect of the accumulation of the delay in the method of RDT which considers the time of the cell that is discharged from the established cell interval controller. And, in order to apply the merit of RDT, the method of TIT sets its standards on the cells arrival time as it was in the method of RAT.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.5C
• /
• pp.454-464
• /
• 2002

In the ATM-PON (Asynchronous Transfer Mode-Passive Optical Network), the downstream cell transmitted by an OLT is broadcast to all ONUs. The ONU receives selectively its own cells by VP filtering. On the other hand, the upstream cell can be transmitted by ONU in the case of receiving a grant from the OLT. After providing the grant to an ONU, the OLT expects the arrival of a cell after an elapse of the equalized round trip delay. ITU-T G.983.1 recommends that one bit error is allowed between the expected arrival time and the actual arrival time at the OLT. Because the ONU processes the different delay to each type of grant (ranging, user cell, and mimi-slot grant), it is not simple to design the transmission part of ONU. In this paper, we implement a grant processor which provides the delay accurately in the ONU TC chip with the FPGA. For the given equalized delay, it deals with the delay for the cell, the byte, and the bit unit by using the shift register, the byte counter, and the D flip-flop, respectively. We verify the operation of the grant processor by the time simulation and the measurement of the optical board output.

• Journal of applied mathematics & informatics
• /
• v.22 no.1_2
• /
• pp.501-515
• /
• 2006

The IEEE 802.11 protocol is the most mature technology for WLANs(Wireless Local Area Networks). However, as the number of stations increases, the delay and throughput performance of IEEE 802.11 MAC(Medium Access Control) degrades severely. In this paper, we present the comprehensive performance analysis of IEEE 802.11 MAC protocol by investigating the MAC layer packet service time when arrival packet sizes have a general probability distribution. We obtain the discrete probability distribution of the MAC layer service time. By using this, we analyze the system throughput and the MAC layer packet service time of IEEE 802.11 MAC protocol in wireless LAN environment. We take some numerical examples for the system throughput and the mean packet service time for several special distributions of arrival packet sizes.

• Journal of the Korean Society for Railway
• /
• v.10 no.2 s.39
• /
• pp.179-185
• /
• 2007

In large station with high density traffic, trains can be hardly controlled by CTC but by station dispatcher because CTC has difficulties in monitoring all states of affairs happening within each station such as departures, arrivals of many trains from different lines and shunting of trains to move between yards and platforms, etc. Therefore the station's dispatcher has to make quick decision about how to reschedule the times and routes for all the trains scheduled within a specific time window. And such decision becomes harder when an unexpected delay occurs because a delay occurring in a train propagates other trains as time goes on. Generally, it is called the conflict detection and resolution to adjust beforehand the distorted schedule due to a delay to original schedule. Our research is different from the state of the arts in that ours determines simultaneously the routes and the times of arrival and departure of trains, although others do only the arrival and departure time of the trains without considering the alternative routes and shunting of the station. This study suggests a mathematical approach for how to detect in advance and resolve efficiently the conflicts occurring within a station and it will be shown how to reduce delay using our approach by means of analysing the schedule of ChyungRyangRi station.

• Journal of Internet Computing and Services
• /
• v.18 no.6
• /
• pp.65-73
• /
• 2017

Congestion occurring at wireless sensor networks(WSNs) causes packet delay and packet drop, which directly affects overall QoS(Quality of Service) parameters of network. Network congestion is critical when important data is to be transmitted through network. Thus, it is significantly important to effectively control the congestion. In this paper, new mechanism to guarantee reliable transmission for the important data is proposed by considering the importance of packet, configuring packet priority and utilizing the settings in routing process. Using this mechanism, network condition can be maintained without congestion in a way of making packet routed through various routes. Additionally, congestion control using packet service time, packet inter-arrival time and buffer utilization enables to reduce packet delay and prevent packet drop. Performance for the proposed mechanism was evaluated by simulation. The simulation results indicate that the proposed mechanism results to reduction of packet delay and produces positive influence in terms of packet loss rate and network lifetime. It implies that the proposed mechanism contributes to maintaining the network condition to be efficient.