• Journal of Welding and Joining
• /
• 제19권3호
• /
• pp.325-333
• /
• 2001

The effect of base metal grain size on isothermal solidification behavior of Ni-base superalloy, CMSX-2 during transient liquid phase (TLP) bonding was investigated employing MBF-80 insert metal. TLP-bonding of single crystal. coarse-grained and fine-grained CMSX-2 was carried out at 1373∼1548k for various holding time in vacuum. The eutectic width diminished linearly with the square root of holding time during isothermal solidification process for single crystal, coarse-grained and fine-grained base metals. The completion time for isothermal solidification decreased in the order ; single crystal, coarse-grained and fine-grained base metals. The difference of isothermal solidification rates produced when bonding the different base metals could be explained quantitatively by the effect of base metal grain boundaries on the apparent average diffusion coefficient of boron in CMSX-2.

• 한국통신학회논문지
• /
• 제25권9A호
• /
• pp.1348-1358
• /
• 2000

본 논문은 CDMA 이동전화 시스템에서 하나의 기지국(cell) 내에서 처리되는 BTS 와 중계기의 통화량을 분석하기 위한 연구이다. 일반적으로 중계기는 기지국(BTS)의 RF 회로에서 직접 분기하여 연결하는 방식으로 개발되어 기지국 통화와 구분되지 못하는 시스템 구조를 가지고 있다. 이러한 문제점을 해결하기 위해서 중계기 수신단에 시간 지연장치(Time Delay Device)를 설치하고 실험을 실시하여 Traffic을 구분하는 결과를 얻었다. 그러나 기지국에는 하나의 BTS에 다수의 중계기를 연결하여 운용하고 있다. 따라서 중계기 3대가 설치된 기지국(1BTS+3중계기)을 선정, 각 중계기에 계산된 임의의 Time Delay를 설치하고, 동 기지국에서 2일 동안 통화실험을 실시한 결과 기지국 및 3개의 중계기 Traffic이 뚜렷하게 구분되는 데이터를 얻었다.

• 한국식생활문화학회지
• /
• 제26권5호
• /
• pp.468-477
• /
• 2011

Optimum preparation conditions for chicken head soup base were determined in terms of the effects of amount of chicken head and cooking time using response surface methodology based on sensory properties. Sensory properties that were evaluated were yellowness, turbidity, bloody, chicken-brothy, organ meat-like, and fat-like flavor. All values of sensory characteristics increased remarkably with an increase in the amount of chicken head and cooking time. The optimum amount of chicken head and cooking time were determined to be 1800 g and 150 minutes, respectively. Chicken head soup base had less fat, free amino acids, nucleotides, and its derivatives, but had significantly more cholesterol, sodium, and iron than whole chicken soup base. In flavor compound analysis, the amount of hexanal of the chicken head soup base, which is related to fat rancidity flavor, was 11-fold higher than that of the whole chicken soup base.

• Journal of Welding and Joining
• /
• 제23권6호
• /
• pp.99-105
• /
• 2005

The mixing ratio effect of the GTD-111(base metal) powder and the GNI-3 (Ni-l4Cr-9.5Co-3.5Al-2.5B) powder on TLP(Transient Liquid Phase) bonding phenomena and mechanism was investigated. At the mixing ratio of the base metal powder under $50wt\%$, the base metal powders fully melted at the initial time and a large amount of the base metal near the bonded interlayer was dissolved by liquid inter metal. Liquid insert metal was eliminated by isothermal solidification which was controlled by the diffusion of B into the base metal. The solid phases in the bonded interlayer grew epitaxially from the base metal near the bonded interlayer inward the insert metal during the isothermal solidification. The number of grain boundaries farmed at the bonded interlayer corresponded with those of base metal. At the mixing ratio above $60wt\%$, the base metal powder melted only at the surface of the powder and the amount of the base metal dissolution was also less at the initial time. Nuclear of solids firmed not only from the base metal near the bonded interlayer but also from the remained base metal powder in the bonded interlayer. Finally, the polycrystal in the bonded interlayer was formed when the isothermal solidification finished. When the isothermal solidification was finished, the contents of the elements in the boned interlayer were approximately equal to those of the base metal. Cr-W borides and Cr-W-Ta-Ti borides formed in the base metal near the bonded interlayer. And these borides decreased with the increasing of holding time.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제25회 추계학술대회논문집
• /
• pp.479-483
• /
• 2005

BBU(Base Bleed Unit)는 155mm 탄에 부착되어 비행 중에 형성되는 탄저부 항력(Base drag)을 감소시켜 사거리를 연장시키는 무기 체계로 국내에서는 2000년 이후 양산화 되었다. 본 연구는 항력감소제용 저연소속도 추진제의 원료 조성 변화를 통한 공정 Lead time 단축으로 생산성을 향상시키는데 목적이 있으며 개발 과정은 추진제 및 연소방지제의 조성시험을 통한 기본적인 특성 확인을 거친 후 Spin Test 와 실제 발사시험을 통해서 최종 성능을 확인하는 순서로 진행하였다.

• Earthquakes and Structures
• /
• 제12권3호
• /
• pp.285-296
• /
• 2017

Base isolation is a quite practical control strategy for enhancing the response of structural systems induced by strong ground motions. Due to the dynamic effects of base isolation systems, reduction in the interstory drifts of the superstructure is often achieved at the expense of high base displacement level, which may lead to instability of the structure or non-practical designs for the base isolators. To reduce the base displacement, several hybrid structural control strategies have been studied over the past decades. This study investigates a particular strategy that employs Tuned Mass Dampers (TMDs) for improving the performance of base-isolated structures and unlike previous studies, specifically focuses on the effectiveness of this hybrid control strategy in structures that are equipped with nonlinear base isolation systems. To consider the nonlinearities of base isolation systems, a Bouc-Wen model is selected and nonlinear dynamic OpenSees models are used to perform several time-history simulations in time and frequency domains. Through these numerical simulations, the effects of several parameters such as the fundamental period of the structure, dynamic properties of the TMD and isolation systems and properties of the input ground motion on the behaviour of TMD-structure-base isolation systems are examined. The results of this study provide a better insight into the performance of linear shear-story structures with nonlinear base isolators and show that there are many scenarios in which TMDs can still improve the performance of these systems.

• Smart Structures and Systems
• /
• 제25권2호
• /
• pp.155-167
• /
• 2020

This paper demonstrates a real-time hybrid substructuring (RTHS) shake table test to evaluate the seismic performance of a base isolated building. Since RTHS involves a feedback loop in the test implementation, the frequency dependent magnitude and inherent time delay of the actuator dynamics can introduce inaccuracy and instability. The paper presents a robust stability and performance analysis method for the RTHS test. The robust stability method involves casting the actuator dynamics as a multiplicative uncertainty and applying the small gain theorem to derive the sufficient conditions for robust stability and performance. The attractive feature of this robust stability and performance analysis method is that it accommodates linearized modeled or measured frequency response functions for both the physical substructure and actuator dynamics. Significant experimental research has been conducted on base isolators and dampers toward developing high fidelity numerical models. Shake table testing, where the building superstructure is tested while the isolation layer is numerically modeled, can allow for a range of isolation strategies to be examined for a single shake table experiment. Further, recent concerns in base isolation for long period, long duration earthquakes necessitate adding damping at the isolation layer, which can allow higher frequency energy to be transmitted into the superstructure and can result in damage to structural and nonstructural components that can be difficult to numerically model and accurately predict. As such, physical testing of the superstructure while numerically modeling the isolation layer may be desired. The RTHS approach has been previously proposed for base isolated buildings, however, to date it has not been conducted on a base isolated structure isolated at the ground level and where the isolation layer itself is numerically simulated. This configuration provides multiple challenges in the RTHS stability associated with higher physical substructure frequencies and a low numerical to physical mass ratio. This paper demonstrates a base isolated RTHS test and the robust stability and performance analysis necessary to ensure the stability and accuracy. The tests consist of a scaled idealized 4-story superstructure building model placed directly onto a shake table and the isolation layer simulated in MATLAB/Simulink using a dSpace real-time controller.

• 대한치과보철학회지
• /
• 제38권1호
• /
• pp.38-49
• /
• 2000

The purpose of this study was to evaluate the effects of thermocycling on the shear bond strength of Co-Cr alloy to denture base resin. PMMA denture base resin such as heat-cured $Vertex-RS^{(R)}$, self-cured $Vertex-SC^{(R)}$ and 4-META denture base resin such as heat-cured $Meta-Dent^{(R)}$, self-cured $Meta-Fast^{(R)}$ was bonded to Co-Cr alloy. Samples were divided into 3 groups : no thermocycling group as control, thermocycling between $5^{\circ}C\;and\;55^{\circ}C$ with 15 second dwell time as group 1, thermocycling with 1 minute dwell time as group 2. The shear bond strength was measured and the interface between metal and resin was observed by SEM. The results were as follows. 1. The shear bond strength decreased significantly according to thermocycling and dwell time(P<0.001). 2. The bond strength of Co-Cr alloy and 4-META denture base resin was significantly higher than that of Co-Cr alloy and PMMA denture base resin(P<0.001) 3. In SEM, there was no gap in control group, but there was much and large gap in group 1, 2. The longer dwell times, the lower bond strength. PMMA denture base resin had more gap than 4-META denture base resin in the interface. These results revealed that thermocycling decreased the bond strength between Co-Cr alloy and denture base resin and dwell time of thermocycling changed the effect of thermocycling. The results suggested that oral temperature change affect the bond strength of prosthesis.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 1999년도 춘계종합학술대회
• /
• pp.415-419
• /
• 1999

Many bipolar logic circuit of conventional occurred problem of speed delay according to deep saturation state of vertical NPN Transistor. In order to remove minority carries of the base region at changing signal in conventional bipolar logic circuit, we made transistor which is composed of NPN transistor shortened buried layer under the Base region, PNP transistor which is merged in base, epi layer and substrate. Also the Ring-Oscillator for measuring transmission time-delay per gate was designed as well. The structure of Gate consists of the vertical NPN Transistor, substrate and Merged PNP Transistor. In the result, we fount that tarriers which are coming into intrinsic Base from Emitter and the portion of edge are relatively a lot, so those make Base currents a lot and Gain is low with a few of collector currents because of cutting the buried layer of collector of conventional junction area. Merged PNP Transistor's currents are low because Base width is wide and the difference of Emitter's density and Base's density is small. we get amplitude of logic voltage of 200mv, the minimum of transmission delay-time of 211nS, and the minimum of transmission delay-time per gate of 7.26nS in AC characteristic output of Ring-Oscillator connected Gate.

• 한국통신학회논문지
• /
• 제33권6A호
• /
• pp.624-634
• /
• 2008

이동성을 보장하는 IEEE 802.16e 네트워크에서 MS는 자신이 핸드오버 할 타겟 BS를 결정하기 위해 스캐닝 과정을 수행한다. IEEE 802.16e 네트워크에서 동작하는 BS는 각각의 MS에 대한 위치정보를 관리하지 않으므로 스캐닝 스케줄을 요청한 각각의 MS들에게 위치적으로 고려되지 않은 이웃 BS 채널들을 제공하게 된다. MS는 적절한 타겟 BS 채널을 발견하기까지 긴 시간을 스캐닝 과정에 머무르게 된다. 이러한 스캐닝 과정은 반복적인 스캔 구간에 의해 MS의 서비스 품질을 저하시키거나 MS가 이후의 핸드오버를 시작할 적절한 타이밍을 놓치게 하는 등의 문제점을 내제하고 있다. 따라서 본 논문에서는 IEEE 802.16e의 여러 MS들이 그룹을 형성하여 분산적으로 스캐닝을 수행하고 그 결과를 공유함으로써 보다 빠르고 효율적으로 타겟 BS를 발견할 수 있는 그룹 스캐닝 기법을 제안한다. 제안된 기법은 직접 그룹을 형성하는 MS들 뿐만 아니라 동일한 셀 내에서 유영하는 다른 MS들에게도 유용하게 적용될 수 있다.