• 한국운동역학회지
• /
• 제30권1호
• /
• pp.51-61
• /
• 2020

Objective: The purpose of this study is to analyse and comparison the differences of kinematic variables for Fente skill in Fencing. Method: For this, 15 people were selected as 5 beginners with less than 2 years of experience, 5 intermediate-class people with more than 2 years and less than 4 years, and 5 experts-class people with more than 4 years. Through the comparison of Marche Fente motion according to proficiency, for the necessary time, travel distance, the kinematical factor of joint angle, oneway ANOVA was performed in order to identify differences according to variables by phase. Results: The time required for each phase was shown to be shorter for all phases experts than for beginners and intermediates. At the horizontal displacement of the foot, the right foot left out the last phase and the experts appeared long. The left foot showed short beginners in all phases. The angle of forward lean showed that the angle of forward lean was tilted forward by the experts of all phases. There was a difference between the left and right joint angles of the lower limb, both of the ankle, knee and hip joints. Conclusion: In overall, Beginners should quickly widen the distance of their feet when they make a Fente movement. The beginner shall tilt the upper body forward in order to increase the angle of forward lean. The beginner shall, in the last phase, have a smaller angle on the hip joint.

• The Journal of Korean Physical Therapy
• /
• 제23권6호
• /
• pp.9-14
• /
• 2011

Purpose: The pelvic tilting exercise is a well recognized rehabilitation maneuver. However, little information is available on the changes of lumbar segmental motion during pelvic tilting. This study was conducted to measure the kinematics of the pelvic tilting exercise on the supine and prone positions via fluoroscopy. Methods: A total of 10 female subjects were enrolled. During anterior, neutral, and posterior pelvic tilting, radiographs were taken in each exercise via fluoroscopy (ARCADIS Orbic, Siemens, USA). Images were sent to the picture archiving communication system (PACS), and the digitized images were analyzed using LabVIEW software (National Instruments, USA). Lumbosacral lordosis and the intervertebral body angle, intervertebral disc angle, and intervertebral displacement were analyzed. Results: The results of lumbar kinematic analysis during three tilting postures in the supine and prone positions demonstrated that lumbosacral lordosis and the intervertebral body angle and intervertebral disc angle were significantly higher when the pelvis was tilted anteriorly (p>0.05). However, there was no significant difference between anterior and neutral tilting in the intervertebral disc angle at the L3/4 level in the prone position (p>0.05), and there was no significant difference among tilting positions in intervertebral body displacement in the prone position (p>0.05). Conclusion: This study provides scientific evidence about the pelvic tilting exercise in lumbosacral segmental motion. Depending on the pelvic tilting exercise, kinematic changes were demonstrated in both positions, especially in the supine position. It is suggested that the supine position is effective for mobility, but it should be used carefully for the LBP (Low back pain) patient with hypermobility.

• 한국태양에너지학회 논문집
• /
• 제40권3호
• /
• pp.43-52
• /
• 2020

By blocking irradiance, shadows cast by high-rise buildings in urban areas can reduce the power generation efficiency of PV panels installed on low-rise buildings. As the conventionally installed PV panel is not suitable for the urban environment, which is unfavorable for power generating, a more radical solution is required. This study aims to help solve this problem by estimating the optimal PV panel angle. Using the proposed method, the optimal PV angle was calculated by considering shadows that could be cast by nearby buildings throughout the year, and the correlation between solar shading and elevation angle was discovered based on the calculated data.

• 한국산학기술학회논문지
• /
• 제22권2호
• /
• pp.134-138
• /
• 2021

스마트폰 등에서 사용되는 고성능 디스플레이에는 다양한 종류의 정밀한 플라스틱 박막 필름(Plastic Thin Film)이 사용되고 있다. 롤투롤(Roll-To-Roll) 공정으로 제조되는 플라스틱 박막 필름은 생산 공정 중에 실시간으로 필름의 두께가 계측되고, 정확하게 관리되어야 한다. 필름 제조 과정에서 필름에 장력이 작용하면서 주름이 발생되고, 이러한 주름 발생은 필름의 두께 방향과 두께 측정기의 광축이 서로 경사지게 한다. 결국 두께 측정기는 필름의 수직 두께가 아닌 경사진 두께를 측정하게 됨으로써 실제 두께보다 더 큰 값으로 측정하게 된다. 본 연구에서는, 플라스틱 필름의 경사로 인하여 발생하게 되는 두께 측정기에서의 계측값 오차를 보정하기 위하여, 필름의 경사 각도를 계측하는 연구가 진행되었다. 플라스틱 필름에 슬릿 빔 레이저를 조사하고, 필름에서 반사되는 슬릿 빔 레이저가 PSD(Position Sensitive Device)에 맺히는 광학 시스템을 구성하였으며, 실험을 통하여 필름의 경사 각도와 PSD 출력값의 관계를 1차 방정식 형태로 구하였다. 이를 이용하여 필름의 경사 각도를 측정하는 장치가 구축되었으며, 250KHz의 속도로 경사 각도의 측정이 가능하였다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제45권4호
• /
• pp.305-312
• /
• 2022

The proportion and testing of portable radiation tests, which are limited at the request of the doctor, are gradually increasing only for patients in emergency situations and difficulties in moving. However, as there are many limiting factors compared to fixed devices, this study intends to measure and analyze the distortion of images according to the angle of the detector and the change in dose according to the position of the subject. For distortion experiments using a mobile radiation generator used in Hospital A, the SID was tilted by 110 cm, 14"×17" wireless FPD detector to 0°, -5°, -10°, -15°, -20°, and -35° to measure the change in area. The dose according to the location of the detector was analyzed on average by measuring the central dose at 110 cm of the SID and measuring the dose of 9 locations three times each. The analysis result of distortion by location according to the angle of the detector showed a statistically significant difference (f=58.74, p<0.000). Therefore, it can be seen that the angle of the detector and the tube is closely related to the distortion of the image. The difference in dose by location of the detector increased with respect to the center - pole, and decreased with the + pole. Tests using mobile radiation generators will require careful efforts by clinicians to position patients in the center of the detector for accurate diagnosis, and efforts will be made to level the angle between the mobile radiation generators and the detector.

• 한국방사선학회논문지
• /
• 제13권7호
• /
• pp.979-986
• /
• 2019

본 연구는 Rib Rando Phantom을 이용하여 겨드랑 첫 번째, 두 번째 갈비뼈 골절이 선예하게 나타나는 영상의 검사방법을 연구하였다. 팬톰의 자세와 엑스선관 각도를 수직, 머리쪽 5°, 다리쪽 5°로 변경하여 검사하였다. 획득한 영상을 방사선사가 주관적으로 영상평가 하였으며, 평가 데이터를 SPSS ver. 3.0으로 분석하였다. ImageJ Program을 이용하여 신호대잡음비(SNR)를 계산하였다. 그 결과 Cronbach Alpha 값이 0.789로 유의하게 높았다. 신호대잡음비(SNR)의 결과는 갈비뼈 앞쪽의 경우 엑스선관을 머리쪽으로 5° 기울여 검사 시 6.038, 갈비뼈 뒤쪽의 경우 엑스선관을 다리쪽으로 5° 기울여 검사 시 7.860으로 가장 높았다. 겨드랑 갈비뼈의 촬영기법으로 앞쪽 검사는 골절된 부위를 거상하고 엑스선관 각도를 머리쪽으로 5° 주며, 뒤쪽 검사는 골절된 부위를 밀착하여 엑스선관 각도를 발쪽으로 5° 기울여 검사한다면 선예한 영상을 얻을 수 있을 것으로 사료된다.

• 한국항공우주학회지
• /
• 제35권6호
• /
• pp.509-516
• /
• 2007

본 연구에서는 틸트로터 항공기의 날개-로터 시스템의 수학적 모델링과 자유진동 제어에 대하여 고찰하였다. 날개에 부착된 로터는 수직방향에서 수평방향으로 또는 그 반대로 틸팅각을 변경시킬 수 있다. 로터의 틸팅각, 복합재료 날개의 섬유각, 로터의 회전속도를 변수로 하여 자유진동 특성 및 압전재료를 이용한 자유진동 제어 효과에 대하여 고찰하였다. 복합재료 날개는 상자형 박판 보로 모델링 하였으며, 플랩-래그운동 사이의 연성과 인장-비틀림 운동사이의 연성이 발생하는 CUS 구조로 가정하였다. 수치해석 결과와 그에 따른 결론을 도출하였다.

• 대한인간공학회지
• /
• 제17권3호
• /
• pp.103-115
• /
• 1998

Although applying experimental data of ergonomics to a industrial design seems to be a difficult task, making every effort to the application of ergonomics to the industrial design process is still attempted. Sometimes, it is easy to use experimental data, yet, it is very hard to take that data and implement it into the design process. The essence of industrial design depends on human sensitivity, thus we can call the sense of design the software and the experimental data of ergonomics the hardware. The harmony of this hard & software is very important for the process and development of design. New products always demand new forms. Accordingly, it is easy for designers to neglect applying experiments and ergonomic data to products for public users. However, the study of ergonomics data continuously helps to be applied to more products year after year. This paper explores, how to improve the design of the tilting angle related to the shape of knobs on a front panel of a computer monitor. The results of experiments show that a tilted angle is more efficient than that of straight-type when placed on the front panel of a computer monitor with a power button.

• 태양에너지
• /
• 제18권2호
• /
• pp.69-89
• /
• 1998

방위별에 따라 경사면에 입사되는 일사량은 태양에너지 수집장치인 태양열집열기나 태양열온수기, 그리고 태양전지판 설치와 태양열 주택이나 건물 설계시에 매우 중요한 자료로 널리 이용되고 있다. 이는 시스템 설치각도나 설치방향에 의해서 시스템의 수열면에 일사량을 최대로 받게 하는 것이 태양에너지 이용시스템의 성능에 크게 좌우되기 되기 때문이다. 본 연구는 이와 같은 중요성을 감안하여 태양행로에 대한 이론적인 고찰과 실측실험을 통하여 이에 적합한 전문가시스템 모형을 개발하고, 우리나라 주요 지역별에 따라 최대 일사량을 받을 수 있는 경사각도를 산출하여 해당 지역에 적합한 시스템의 최적 설계기준을 제시하고자 한다.

• 대한기계학회논문집B
• /
• 제25권4호
• /
• pp.523-532
• /
• 2001

A simultaneous measurement of wall vorticity and near-wall streamwise velocity fluctuations has been performed using a V-type wall vorticity probe and an I-type velocity probe to investigate the relation between them. Long-time averaged space-time correlations show that the wall vorticity is highly correlated with a turbulence structure which is tilted from the wall in the streamwise direction and that there is a streamwise vortex pair near the wall. It is shown that a structure correlated with the streamwise wall vorticity is smaller than and prior to a structure correlated with the spanwise wall vorticity. Tilting angles are obtained from the phase shift between the wall vorticity and streamwise velocity fluctuations. The tilting angle of the structure correlated with the streamwise wall vorticity is larger than that of the structure correlated with the spanwise wall vorticity. The convection velocity of the near-wall streamwise velocity fluctuations obtained from the space-time correlation is in good agreement with previous results.