• Fashion & Textile Research Journal
• /
• v.21 no.6
• /
• pp.813-820
• /
• 2019

This study identified actual wearing and size dissatisfaction with jeans worn by upper grade elementary school girls. A survey was conducted on 147 10~12-year-old girls in order to collect basic data to design a slim fit jeans pattern for upper grade elementary school girls. The result of the study are as follows. Upper grade elementary school girls wore jeans at least once a week, 46.9% were 1~2 times, 31.3% were 3~4 times and 21.8% were more than 5 times per week. The size of the jeans they wear was often one size or two sizes larger than the actual height section. Upper grade elementary school girls preferred jeans that fit well and allow for a full range of motion; in addition, waist and hip measurements were important criteria when selecting size. The preferred length of jeans was those that go to the ankle along with slim-style jeans made of "cotton+spandex". In terms of dissatisfaction with jeans, upper grade elementary school girls showed discomfort when the lower back waistline slipped when sitting and when there was a tight crotch area. In addition, cases of exchange or return were found to be due to fit, including waist, hip or thigh measurements even when the area most repaired is was the pant length.ired is pant length, cases of exchange or return were found to be due to fit, including waist, hip, or thigh measurements.

• The Korean Journal of Community Living Science
• /
• v.24 no.1
• /
• pp.85-97
• /
• 2013

The purpose of this study was to develop an appropriate jacket pattern for obese women in 20s and 30s, providing a good fit and appearance. The results were as follows: among 3 kinds of patterns collected in order to develop a jacket pattern to fit the average body of an obese woman in 20s and 30s, a business-type pattern(which was comparatively evaluated as a good fit) was worn and revised so as to design a final research pattern with proper fitness and a good shape. The biggest problem of the existing pattern was may overall spares, especially many spares of bust size, waist measurement, hip circumference, all of which makes a bad appearance. Considering the results of a survey which indicates that young obese women like tight-fitting clothes, bust size was decreased from 8 cm to 6 cm, and their waist measurements were bigger compared to other age groups, so a total of 1.1 cm(with 0.3 cm in the front, back side, and 0.5 cm in the back waist) was decreased. The hip circumference was decreased by 2 cm from H/2+4 to H/2+2 cm, the quantity of front deflection was established as 1.5 cm in order to compensate for the coming off of the front side caused by the fat on the stomach.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.4
• /
• pp.530-537
• /
• 2000

The purpose of this study is to develop the measuring tool that can grasp the relationship between body and pattern, the result can be directly digitalized and developed as the pattern as body form is. There are 6 measurements; 1) the width of front and rear neck 2) the slant degree of shoulder 3) the degree of protrusion of breasts and scapulae 4) the separation of front and rear board 5) space between body and clothes 6) vertical strand in the clothes Developed measuring tool is handy in un. in which points of body to be measured are small, and it has the capability of designing the high fitness for body. The measurer developed through this study is named as $\ulcorner$Somato-pattern Measurer$\lrcorner$, size paper is named$\ulcorner$Somato-pattern Paper$\lrcorner$and the pattern made by$\ulcorner$Somato-pattern Measurer$\lrcorner$is named$\ulcorner$Somato-pattern$\lrcorner$respectively by our team. The result of this study is thought to make a great contribution to solving the various problems which can be derived in the time of pattern design because of the difference of physical forms in the same size as well as the difference between the factor of size and that of form in body.

• The Research Journal of the Costume Culture
• /
• v.25 no.4
• /
• pp.476-487
• /
• 2017

The purpose of this study was to suggest torso patterns that fit the three main body shapes of elderly obese women. To reduce time, costs, and also the trial and error needed to make patterns, the CLO program for 3D test wear was employed. Three virtual models for aged obese women were use, with the YUKA system used to produce torso patterns. 3D simulation of test wear and corrections was done to design optimal torso patterns. The results were as follows: First, for the three models of obese women's body shapes as realized by CLO 3D, Type 1 is lower-body obesity shapes, Type 2 is abdominal obesity shapes, and Type 3 is whole-body obesity shapes. Second, to design the study patterns, actual measurement values, back waist length and waist to hip length, were used. The armhole depth (B/4-1.5), front interscye (B/6+2.3), front neck width (B/12-0.5), front neck depth (B/12+0.5), front waist measurement (W/4+ 1.5+D), front hip measurement (H/4+2+0.5), and back hip measurement (H/4+3-0.5) were calculated using formulas. Third, according to the results of test-wearing the study patterns, reduced front neck width and depth improved the neck fit and reduced armhole depth bettered loose or plunging armhole girth and also reduced the sagging of bust c.. Also, tight sidesfrom aprotruded waist and abdomen improved with the increase of surpluses in the back waist and also back and front hip c. The exterior was enhanced by displacement of back and front darts, which distributed surpluses better.

• Fashion & Textile Research Journal
• /
• v.12 no.4
• /
• pp.467-476
• /
• 2010

The purpose of this study was to develop a plausible methodology based on experimental data how to set up darts and split lines on 3D parametric body dressed with tight-fit garment. The results were as following: Through the process of making convex hull, the concave parts were straightened to make a convex hull, especially in the center part of bust, under breast part and scapular part. To figure out the optimum positions of darts and split lines, the inflection points of curve ratio were searched along the horizontal polylines of waist and bust. This procedures produced reliable results with low deviation. Using Rapidform, CATIA and Unigraphics, six patches of bodice patterns were drawn and aligned. Paired t-test results showed the outline and area between 3D surface and 2D were not significantly different, meaning this method could be adaptable when flattening 3D surfaces. The amount of waist dart measured on the pattern showed that the highest portion was allocated on 2nd dart(back), followed by 1st dart(back), 1st dart(front), 2nd dart(front)/side dart, and center back dart. A series of findings suggested that curve ration inflection point could be used as a guide to set up darts and split line on 3D parametric model with low deviation.

• Journal of Fashion Business
• /
• v.23 no.2
• /
• pp.156-169
• /
• 2019

The objective of this study was to develop lightweight, stretchable, tight-fit smart sportswear using the conductive yarns into the garment and demonstrating its usefulness. Sportswears with the ability to control LEDs with respect to lighting of the surrounding were developed by applying embroidery with conductive yarns to 2 types of men's T-shirts and 2 types of women's leggings pants for outdoor activities and exercise purposes. LEDs were applied to the front and back of men's T-shirts and to the rear of the waist of women's leggings. Men's T-shirts were printed where the LEDs were to be applied, and inside, they were embroidered with conductive threads on the hot-melt fabric to be attached, and then connected with LED. Women's pants were embroidered on the elastic band, in the form of a sine wave that gives it ability to stretch, and finally the elastic band was hidden inside the waistband. The operation of the light sensor in the dark provided the ability to protect joggers from night drivers or cyclists. LEDs were activated when the wearer turns on the fashionable device on his/her shoulder by pressing it. It was able to reduce the risk of accidents by giving recognizability to vehicles, bicycles, and athletes approaching or passing by at night, and securing safe distance from vehicles, etc. Internal embroidery technology had the same flexible and lightweight functions as ordinary clothing products, making it possible to apply to tight-fit smart T-shirts or leggings pants designs.

• The Research Journal of the Costume Culture
• /
• v.30 no.4
• /
• pp.495-512
• /
• 2022

This study aims to design a new sizing system for hygienic masks to protect against COVID-19-related respiratory disorders. The product sizes were collected from 70 commercially available hygienic masks, and 18 head measurements were obtained from the three-dimensional (3D) scan data of 2,048 men and women aged 20 to 69 years from the 6th Size Korea Survey. The statistical analysis was performed using the IBM Statistical Package for the Social Sciences (SPSS) 28.0 program. The "bitragion-subnasale arc" and "menton-sellion length" were chosen as the key body dimensions for the hygienic mask sizing system. The linear regressions with 18 3D head measurements were analyzed, and it was determined that the key body dimensions were useful for statistically predicting other 3D head measurements related to hygienic masks. A new sizing system was proposed for two types of masks, "masks with a tight fit" and "masks with a loose fit," taking into account the existing Korean Industrial Standards (KS) and the shortcomings of the sizes of hygienic masks on the market. The sizing system for tight-fitting masks consisted of the key body dimensions, with their sizes indicated by a pair of numbers. The sizing system for loose-fitting masks consisted solely of the bitragion-subnasale arc, with their sizes denoted by letters such as S, M, and L (denoting small, medium, and large, respectively). Future studies should consider this mask sizing system for different age groups, such as children and adolescents.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.40 no.1
• /
• pp.97-113
• /
• 2016

This study develops pant patterns using body shape, measurement and shell mesh data to decide optimal women's pants according to styles with excellent size, fit and shape for different individuals and silhouettes. Standard landmarks, lines, triangles and structures were set on a 3D scanned lower body shell to represent women in their twenties and flattened as a 2D pattern. Patterns were created and analyzed according to culotte, formal, slacks and tight type considering crotch shape, location of the crotch point, and adjusting waist darts. Flattened patterns were rotated to compare existing methods. The crease lines were then set through the hip protrusion point and compared. The main factor of the pant pattern were extracted, total rise, crotch depth, crotch width, angle of center line, shape of the center line curve, the thigh width, the amount of waist dart, and crease line position. With going tight style from the culotte, the fits are closer to the figure with minimized thigh circumference, the dart amount decreases, the crotch depth increases, the crotch extensions were shorter, and the angle of the center back increased. The total rise is U shape for culotte and is closer to V shape as the silhouette tightens. T-test of appearance evaluation of the developed pant pattern were conducted after analyzing measurements and shapes of each styles. The results of the developed patterns were superior to existing patterns in accordance to hip line between body and pants as well as appearance evaluation. We found systematic mechanisms among pattern factors that create various pant silhouettes. Evidence on classification of the silhouettes of traditional types of pants were explained objectively through the process of playing out 3D forms.

• Journal of Fashion Business
• /
• v.18 no.6
• /
• pp.116-136
• /
• 2014

The purpose of this study was to select patterns for slim fit pants, for the following main research, to develop new pants patterns that are suitable and preferable for men in their 20s. We compared and analyzed the patterns of which are currently in the market. We compared 10 different slim pants pattern drafting and analyzed their differences. Then, we examined their appearances and functionalities thru a male model test fitting 10 different samples of the pants. The conclusions of the research results were as follows. We listed the patterns in the following order based on the numbers of items each pattern has, which are statistically considerable for the evaluation to the optimum satisfactory level among the total of 35 testing categories: J > B=I > F=H > A > C=G > D > E. In the functionality test of the pants, we found that it was too tight around the waist and abdomen area with Pattern D, where-as it was too loose around the waist with Pattern C:,-, yet, both of the patterns indicated that it is a good fit in over-all. Therefore, we chose Pattern E, D, C, and G as the existing pants patterns that could be used for further research and for educational purposes to develop a slim pants pattern for men in their 20s.

• Fashion & Textile Research Journal
• /
• v.11 no.3
• /
• pp.445-452
• /
• 2009

This study aims to improve the fit of high school girls' uniforms. This study researched on the fit of the recent high school girls' uniforms and developed a sizing system that adequately reflects their body figures. The results are as follows. First, the research showed that over 50% of the highschool girls wore their blouses too tight, whereas over 60% of the girls wore skirts that were appropriately fitted. Second, to classify the high school girls' figures, factor analysis and cluster analysis were conducted. 5 factors were extracted for upper body and 3 factors for the lower body. The girls were then divided into 3 groups for the upper body and 4 groups for the lower body. Third, KS size intervals were used for frequency distribution of height and bust for the bodice, height and waist for the lower body. Sizing system of the uniform company and the frequency distribution of sizes were compared. As a result, sizing system of the uniform company and the frequency distribution slightly overlapped. Fourth, sizing system considering body type distribution and high frequency distribution section of sizes was suggested. As a result, for the upper body, when 6 sizes were suggested, 43.9% of the population was covered and when 11 sizes were suggested, 58.3% was covered. For the lower body, when 6 sizes were suggested, 32.2% was covered, and when 11 sizes were suggested 58.9% of the population was covered.