• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.8
• /
• pp.3366-3383
• /
• 2020

The Poisson point process (PPP) is widely used in wireless network modeling and performance analysis because it can provide tractable results for heterogeneous cellular networks (HetNets) analysis. However, it cannot accurately reflect the spatial distribution characteristics of the actual base stations (BSs). Considering the fact that the distribution of macro base stations (MBSs) is exclusive, the deployment of MBSs is modeled by the Matérn hard-core point process (MHCPP), and the deployment of pico base stations (PBSs) is modeled by PPP. This paper studies the performance of multiantenna HetNets and improves the energy efficiency (EE) of HetNets by optimizing the transmit power of PBSs. We use a simple approximate method to study the signal-to-interference ratio (SIR) distribution in two-tier MHCPP-PPP HetNets and derive the coverage probability, average data rate and EE of HetNets. Then, an optimization algorithm is proposed to improve the EE of HetNets. Finally, three transmission technologies are simulated and analyzed. The results show that multiantenna transmission has better system performance than single antenna transmission and that selecting the appropriate transmit power for a PBS can effectively improve the EE of the system. In addition, two-tier MHCPP-PPP HetNets have higher EE than two-tier PPP-PPP HetNets.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.3
• /
• pp.240-245
• /
• 2014

As the seriousness of the global environment pollution is gaining our attention recently, researches on application of greenhouse gas emission of ship are being carried globally. However domestic study on greenhouse gas emission from ship was not carried out in various fields. In this study, quantitative data which was presented by greenhouse gas emission of training ship HANBADA and greenhouse gas emission was calculated by Tier 1 method based on total fuel consumption and amount of shore power. Actual voyage data for 1year in 2012 was used to analysis the greenhouse gas emission. This study showed how many weight of gases were exhausted per 1 gross tonnage and per 1trainee in the training ship. There is a need of further research to reduce pollutant and to respond to international environment regulation consistently.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.5
• /
• pp.362-374
• /
• 2010

Product Lifecycle Management (PLM) is an integrated business approach to manage the creation and distribution of product information throughout the product development process. From the product perspective, PLM encompasses a holistic approach to product development and product information management. It supports the integrated product information in conjunction with the efficient product structures and BOM (Bill Of Material), user interfaces, proper functions, design processes and enterprise integration. Therefore, PLM should not only satisfy required functions as an enterprise software but also offer a systematic method for the efficient application from the initial stage of its development. Recently, many shipyards have been considering the PLM as a strategic solution to get the efficient management of product information such as 3-D models, BOM, drawings, documents, and the other product data. Though many studies on PLM are performed, most of them are performed in a function-based approach adequate for mass productive assembly industries. It could not help having limitations on applying the proper PLM system to the shipbuilding business since the requirements of shipbuilding PLM are too diverse and huge to design the architecture. This study presents the PLM framework which effectively reflects the diverse requirements of shipbuilding PLM. In order to get the macroscopic architecture of shipbuilding PLM, authors suggest the four-tier architecture model which considers the various requirements collected from shipyards. Entities of ship design data are modeled BOM in terms of product structure and hierarchical class diagram. Applicable functions of shipbuilding PLM are also investigated by analysis of issues of ship design. Finally, by reflecting the design process of shipbuilding, To-Be ship design procedure cooperated with the suggested PLM framework has been summarized.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.7
• /
• pp.390-398
• /
• 2006

The objective of the High Energy Physics(HEP) is to understand the basic properties of elementary particles and their interactions. The CMS(Compact Muon Solenoid) experiment at CERN which will produce a few PetaByte of data and the size of collaboration is around 2000 physicists. We cannot process the amount of data by current concept of computing. Therefore, an area of High Energy Physics uses a concept of Tier and Data Grid. We also apply Data Grid to current High Energy Physics experiments. In this paper, we report High Energy Physics Data Grid System as an application of Grid.

• Journal of the Korea Society for Simulation
• /
• v.26 no.2
• /
• pp.31-39
• /
• 2017

This paper analyses the effectiveness of Kill Chain (KC) and Korea Air and Missile Defense (KAMD), also known as the K2 systems, using monte carlo simulation. It is assumed that the K2 systems are consisted with unitary KC and multi-layered (upper-tier and lower-tier) KAMD. And each system has two or three arbitrary weapon systems and its combination makes 12 scenarios. Measures of effectiveness (MOE) of the K2 systems were defined as ratio of eliminated ballistic missiles from total threats. And total cost was calculated by number of weapon launched and its unit cost. MOE and total cost of the K2 systems were estimated using monte carlo simulation with a thousand iteration for each scenario. Cost-effectiveness analysis was performed and the best candidate was selected using fixed effectiveness approach. As a result, the performances of KC are prime factor that affects both effectiveness and total cost of the K2 systems. It is also, acquired proper level of lower-tier KAMD to achieve desired defense effectiveness. For future work, it needs to be performed cost-effectiveness analysis based on practical specification and life cycle cost of weapon systems.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.3
• /
• pp.23-29
• /
• 2002

The design of data processing of GIS requires efficient method with analysis procedure. This system is easy to be used and managed for presenting route according to conditions as a graphic user interface environmental window system by applying three tiers based object-oriented method. The tier of data is in charge of a class for the exchange, extraction and conservation of data between GeoMedia and application tiers. A route selection algorithm was applied to application tiers, considering all conditions which are necessary for the route selection between a beginning point and an end point, and it was added by module such as data handing, road condition, buffering, clothoid and AHP to select the alternative route followed by new condition. The user tier can express the data acquired by an application tier. Thus three tiers based architecture was presented by implementing design of GIB data processing for its efficiency.

• Journal of the Korean Society of Safety
• /
• v.37 no.2
• /
• pp.10-17
• /
• 2022

Currently, in Korea, lower and upper tier qualifying quantities of the 97 substances requiring preparation for accidents have been designated. The information on the submission of chemical accident prevention management plan varies depending on whether the handling volume is above or below the lower or upper qualifying quantity. Because the criteria of the lower and upper qualifying quantities of substance requiring preparation for accidents are not stipulated in the Chemical Substances Control Act, this study attempted to establish a criterion through significance verification. In addition, the study investigated whether these qualifying quantities are related to the Globally Harmonized System of Classification and Labelling of Chemicals (GHS), toxic concentration endpoint, and National Fire Protection Association (NFPA). Finally, by comparing the risk categorization of the GHS, endpoint, and NFPA, it was evaluated whether the circulation-volume-based risk categorization of the substance requiring preparation for accidents that are in the top 13 is appropriate. The qualifying quantities of benzene, toluene, and sulfuric acid needed to be adjusted upward, while those of methyl alcohol and ammonia were adjusted downward from the current qualifying quantities. It is required to establish a quantified criterion that fully reflects the domestic situations in Korea and various indicators such as toxicity, physicochemical properties, and circulation volume for the qualified criterion of hazardous chemical substances. The study is expected to be helpful in establishing an efficient system by systematizing the criterion for qualifying quantity.

• Spatial Information Research
• /
• v.8 no.2
• /
• pp.213-232
• /
• 2000

It is important to scrutinize spatial patterns in crime analysis since crime data has geographical attribute in itself. We focus on the development of ¨Crime Analysis GIS¨ prototype which can discover spatial patterns in crime data by integrating mapping functions of GIS and spatial analysis techniques. The structure of this system involves integration of DBMS and GIS, and the major functions of the system include (i) exploring spatial distribution of point data, (ii) mapping hot-spot, (iii) clustering analysis of crime occurrence, and (iv) analyzing aggregated areal data. The process of design and implementation of this system is based on object-oriented methodologies. A web-based extension of the prototype using 3-tier architecture is currently under development.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.7
• /
• pp.1361-1373
• /
• 2001

In the firewall systems of 3-tier client/server systems, in general, data transmission speed is declined rapidly according to the duplicated proxy services in application server and fire wall server. In this paper, an application server configuration containing the proxy functions of firewall system is proposed so that the high speed data transmission can be achieved. The proposed application server can form the dual-homed gateway by means of the additional network interface card. The screened router of application server forms the screened subnet gateway that can separate the internal network. The proposed server configuration is more effective in traffic control than the traditional firewall systems and provides high speed data transmission with the functions of firewall. It can be also cost-effective alternative to the firewall system.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.4
• /
• pp.479-485
• /
• 2005

Recently, computing technology requires intelligent system structures for context-awareness in ubiquitous computing environment. An intelligent system for context-awareness is based on agents, and need sensor information to recognize users and frames to support service. Therefore, this paper proposes the structure of 3-tier context-awareness processing server/client that can connect dynamically with each sensor and service, and support various context stably The structure of a proposal system is composed of a client class that recognizes uses' context information, a server class that processes realized context information by an application processing agent, and a management server that manages these two classes. Also, in this structure users information is composed of dynamic profile to support exquisite service.