• 대한토목학회논문집
• /
• 제42권2호
• /
• pp.209-217
• /
• 2022

중앙 가변차로제는 비대칭적 중방향 교통류에 의한 혼잡을 완화하기 위한 효과적인 대안으로 평가되어 왔으나, 교통안전에 대한 문제로 국내에서는 점차 사라지고 있다. 이동식 중앙분리대 시스템은 교통안전 문제를 보완하기 위한 대안으로 활용될 수 있으며, 일시적 버스전용차로 운영과 결합하여 효율적으로 교통혼잡을 관리할 수 있을 것으로 평가된다. 본 연구는 도시고속도로 대상으로 이동식 중앙분리대 활용 버스전용차로 운영 전략에 대한 설정 절차 및 최적의 대안에 대한 평가 절차를 제안하고자 하였다. 이를 위해 서울시 한강변 서측 2개의 도시고속도로 대상 사례연구를 진행하였으며, 그 결과 오전 혼잡시간대 일시적 운영이 가장 효과적인 것으로 나타났다. 본 연구에서 제시된 결과는 향후 유사 시스템을 활용한 버스전용차로 운영 전략 수립의 기반이 될 것으로 기대된다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.318-321
• /
• 2004

The damage scale and damage area in the coast have been increased dramatically because of calamities such as typhoon. tidal wave. flood and storm. Especially. 409 cases. which reach to about $40.9\%$ of natural disasters of 1,000 cases for the recent 15 years have happened on coast area. More than $40\%$ of natural disasters also occurred every year is happening in coastland. Therefore, there is a great need to construct all related GIS database such as atmospheric phenomena (typhoon. tidal wave, flood and storm). harbor facility, harbor traffic and ebb and flow. Furthermore. the certain system should be developed and integrated with NDMS (National Disaster Management System) by using 3D web GIS technology. In this study. the coast disaster area management system was designed and developed by using 3D web GIS technique so that the coast disaster area could be monitored and managed in real time and in visual. Finally. the future disaster in coast area could be predicted scientifically.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.133-144
• /
• 2009

Incheon Bridge, 18.4 km long sea-crossing bridge, will be opened to the traffic in October 2009 and this will be the new landmark of the gearing up north-east Asia as well as the largest & longest bridge of Korea. Incheon Bridge is the integrated set of several special featured bridges including a magnificent cable-stayed girder bridge which has a main span of 800 m width to cross the navigation channel in and out of the Port of Incheon. Incheon Bridge is making an epoch of long-span bridge designs thanks to the fully application of the AASHTO LRFD (load & resistance factor design) to both the superstructures and the substructures. A state-of-the-art of the geotechnologies which were applied to the Incheon Bridge construction project is introduced. The most Large-diameter drilled shafts were penetrated into the bedrock to support the colossal superstructures. The bearing capacity and deformational characteristics of the foundations were verified through the world's largest static pile load test. 8 full-scale pilot piles were tested in both offshore site and onshore area prior to the commencement of constructions. Compressible load beyond 30,000 tonf pressed a single 3 m diameter foundation pile by means of bi-directional loading method including the Osterberg cell techniques. Detailed site investigation to characterize the subsurface properties had been carried out. Geotextile tubes, tied sheet pile walls, and trestles were utilized to overcome the very large tidal difference between ebb and flow at the foreshore site. 44 circular-cell type dolphins surround the piers near the navigation channel to protect the bridge against the collision with aberrant vessels. Each dolphin structure consists of the flat sheet piled wall and infilled aggregates to absorb the collision impact. Geo-centrifugal tests were performed to evaluate the behavior of the dolphin in the seabed and to verify the numerical model for the design. Rip-rap embankments on the seabed are expected to prevent the scouring of the foundation. Prefabricated vertical drains, sand compaction piles, deep cement mixings, horizontal natural-fiber drains, and other subsidiary methods were used to improve the soft ground for the site of abutments, toll plazas, and access roads. Light-weight backfill using EPS blocks helps to reduce the earth pressure behind the abutment on the soft ground. Some kinds of reinforced earth like as MSE using geosynthetics were utilized for the ring wall of the abutment. Soil steel bridges made of corrugated steel plates and engineered backfills were constructed for the open-cut tunnel and the culvert. Diverse experiences of advanced designs and constructions from the Incheon Bridge project have been propagated by relevant engineers and it is strongly expected that significant achievements in geotechnical engineering through this project will contribute to the national development of the longspan bridge technologies remarkably.