• 열처리공학회지
• /
• 제30권6호
• /
• pp.251-257
• /
• 2017

The effect of annealing temperature on the martensitic transformation behavior, tensile deformation chracteristics and shape recovery etc., has been studied in TiNi based shape memory ribbon fabricated by coldrolling of wire. TiNi based shape memory wire (${\phi}=500{\mu}m$) of which structure is intermetallic compound could be cold-rolled without process annealing up to the reduction rate in thickness of 50%, but a few cracks appear in cold-rolled ribbon in the reduction rate in thickness of 65%. The $B2{\rightarrow}R{\rightarrow}B19^{\prime}$ martensitic transformation or $B2{\rightarrow}B19^{\prime}$ martensitic transformation occurs in annealing conditions dissipating lattice defects introduced by coldrolling. However, in case of higher reduction rate or lower annealing temperature, martensitic transformation in cold-rolled and then annealed ribbons does not occur. The maximum shape recovery rate of cold-rolled ribbons with the reduction rate of 35 and 65% could be achieved at annealing temperatures of 250 and $350^{\circ}C$, respectively. The shape recovery rate seems to be related to the stress level of plateau region on stress-strain curve.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.274-274
• /
• 2010

안료의 색상은 출발원료의 조성, 입자크기 및 소결온도에 의한 결정구조 등에 의존한다. 본 연구에서는 Rutile구조를 갖는 세라믹안료인 $TiO_2-WO_3$-NiO의 합성에서 소결온도를 결정하기 위해 소결전 출발원료를 습식법에 의하여 Jar Mill에서 0.7-0.9um로 혼합분쇄한 후 $100^{\circ}C$에서 24시간 건조하였다. 건조후 $1100-1280^{\circ}C$에서 5구간을 선정하여 소결한 시료를 Jar Mill에서 0.8-1um로 분쇄한 후, 다시 $100^{\circ}C$에서 24시간 건조하였다. 이렇게 얻어진 시료를 XRD로 상합성 정도를 조사하고, 색상 및 착색력을 spectrophotometer를 분석하였다. 색상은 1150와 $1250^{\circ}C$에서 가장 좋은 Yellow 색상이 관찰되었으며, XRD에 의한 결정성의 분석결과와 비교적 일치하고 있다. Rutile구조를 갖는 세라믹안료의 색상은 소결시의 결정화도에 따라 민감하게 변화되고 있음을 알 수 있다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.352-355
• /
• 2003

[ $Bi_{3.25}La_{0.75}Ti_3O_{12}$ ] (BLT) thin films were prepared by using metal organic decomposition method onto the LaNiO3 (LNO) bottom electrode. Both the structure and morphology of the films were analyzed by x-ray diffraction (XRD) and atomic force microscope (AFM). Even at low temperatures ranging from 450 to $650^{\circ}C$, the BLT thin films were successfully deposited on LNO bottom electrode and exhibited (117) orientation. The BLT thin films annealed as low as $600^{\circ}C$ showed excellent ferroelectricity, higher remanent polarization and no significant degradation of switching charge at least up to $5{\times}10^9$ switching cycles at a frequency of 100 kHz and 5 V. For the annealing temperature of $600^{\circ}C$, the remanent polarization $P_r$ and coercive field were $23.5\;{\mu}C/cm^2$ and 120 kV/cm, respectively.

• 한국세라믹학회지
• /
• 제28권2호
• /
• pp.101-108
• /
• 1991

0.2 mo1% La doped BaTiO3 samples were prepared by a wet chemical process (Pechini process) and electrical conductivity were measured from annealing temperatures(800-110$0^{\circ}C$) to room temperature continuously. 2 probe I-V characteristics showed that Pt electrodes were non-ohmic below about 80$0^{\circ}C$ for Ladoped sample. I-V curves showed varistor behavior and breakdown voltages showed PTC-like behavior. AC complex impedance of 0.2 La and 0.05 Mn mo1% doped BaTiO3 samples with three different electrodes (electroless Ni, Pt, Ag electrodes) were measured with temperature variation. Complex impedance plots showed that the samples with electroless Ni electrodes have negligible electrode resistance. Samples with Ag or Pt paste electrodes showed large electrode resistance. PTC effect, which is defined as the ratio of maximum resistance to minimum resistance, was found to be less than 10 for 0.2 mo1% La doped dense sample however greater than 105 with codoping of 0.05 mo1% Mn and 0.2 mol% La.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2002년도 춘계학술강연 및 발표대회
• /
• pp.8-8
• /
• 2002

서멧이란(Cermet) '세라믹 경질상과 금속 결합상의 복합체"를 의미하나 절삭 골구계에서는 좁은 의미의 "TiC 혹은 Ti(CN)을 바탕을 Ni,Co를 결합상으로 하는 초경재료"를 의미한다. 이런한 서멧은 전략 물질적 성격이 강한 Co,W로 구성된 WC-Co 초경 합금을 대체하기 위해 고안되었는ㄴ데 ㄴ놓은 경도와 고온에서의 화학적 안정성, 낮은 비중과 저렴한 원료 가격등이 장점이나 WC-Co에 비해 상대적으로 낮은 인성이 문제점으로 지적 되어왔다.TiC-Ni 서멧의 낮은 인성을 향상시키기 위해 Ti(CN) 고용체를 바탕으로 하고 제2ㅇ, 제3의 탄화물이나 질화물을 첨가하는 개발 연구가 과거 30여 년간 진행되어왔다. 그러나 많은 연구결과가 조성 개발 위주로 진행되어 왔고, 또 실험간의 불일치와 재현성 결여로 인해 보여진 여러 현상에 대한 보편적인 결론을 내리기 힘든 점이 있었다. 특히, 미세구조와 기ㅔ적 특성에 관한 통합적이고 조직적인 연구가 진행되지 못하였다. 이번 발표에서는 발표자 실험실에서 지난 8 년 간 행하여 온 실험 결과를 바탕으로 탄화물서멧에 나타나는 독특한 현상, 고용체 탄질화물의 열역학적 안정성, 서멧 재료의 유심구조, 표면 에너지 및 strain, 에너지가 미세 구조 형성에 미치는 영향, 그리고 표면층 형성 등 서멧 개발에 관한 중요 관심사에 대해 간단히 살펴보려고 한다.해 간단히 살펴보려고 한다.

• Bulletin of the Korean Chemical Society
• /
• 제25권12호
• /
• pp.1881-1888
• /
• 2004

A series of $NiO-TiO_2$/$WO_3$ catalysts was prepared by drying powdered $Ni(OH)_2-Ti(OH)_4$ with ammonium metatungstate aqueous solution, followed by calcining in air at high temperature. Characterization of prepared catalysts was performed by using FTIR, Raman, XPS, XRD, and DSC and by measuring surface area. Upon the addition of tungsten oxide to titania up to 25 wt%, the specific surface area and acidity of catalysts increased in proportion to the tungsten oxide content due to the interaction between tungsten oxide and titania. Since the -$TiO_2$/stabilizes the tungsten oxide species, for the samples equal to or less than 25 wt%, tungsten oxide was well dispersed on the surface of titania, but for the samples containing above 25 wt%, the triclinic phase of $WO_3$ was observed at calcination temperature above 400 $^{\circ}C$. The catalytic activities of 10-NiO-$TiO_2$/$WO_3$ for 2-propanol dehydration and cumene dealkylation were correlated with the acidity of catalysts measured by ammonia chemisorption method. NiO may attract reactants and enhance the local concentration of reactants near the acid sites, consequently showing the increased catalytic activities.

• 한국재료학회지
• /
• 제25권1호
• /
• pp.43-47
• /
• 2015

$Zn(BH_4)_2$ was prepared by milling $ZnCl_2$ and $NaBH_4$ in a planetary ball mill in an Ar atmosphere, and XRD analysis, SEM observation, FT-IR analysis, DTA, and TGA were performed for synthesized $Zn(BH_4)_2$ samples. 90 wt% $MgH_2$+1.67 wt% $Zn(BH_4)_2(+NaCl)$+5 wt% Ni+1.67 wt% Ti+1.67 wt% Fe (named $90MgH_2+1.67Zn(BH_4)_2(+NaCl)$+5Ni+1.67Ti+1.67Fe) samples were also prepared by milling in a planetary ball mill in an $H_2$ atmosphere. The gas absorption and release properties of the $Zn(BH_4)_2(+NaCl)$ and $90MgH_2+1.67Zn(BH_4)_2(+NaCl)_2(+NaCl)$+5Ni+1.67Ti+1.67Fe samples were investigated. An FT-IR analysis showed that $Zn(BH_4)_2$ formed in the $Zn(BH_4)_2(+NaCl)$ samples prepared by milling $ZnCl_2$ and $NaBH_4$. At the first cycle at $320^{\circ}C$, $90MgH_2+1.67Zn(BH_4)_2(+NaCl)$+5Ni+1.67Ti+1.67Fe absorbed 2.95 wt% H for 2.5 min and 4.93 wt% H for 60 min under 12 bar $H_2$, and released 1.46 wt% H for 10 min and 4.57 wt% H for 60 min under 1.0 bar $H_2$.

• 대한치과교정학회지
• /
• 제49권4호
• /
• pp.214-221
• /
• 2019

Objective: To investigate the effects of reversing the coiling direction of nickel-titanium closed-coil springs (NiTi-CCSs) on the force-deflection characteristics. Methods: The samples consisted of two commercially available conventional NiTi-CCS groups and two reverse-wound NiTi-CCS groups (Ormco-Conventional vs. Ormco-Reverse; GAC-Conventional vs. GAC-Reverse; n = 20 per group). The reverse-wound NiTi-CCSs were directly made from the corresponding conventional NiTi-CCSs by reversing the coiling direction. Tensile tests were performed for each group in a temperature-controlled acrylic chamber ($37{\pm}1^{\circ}C$). After measuring the force level, the range of the deactivation force plateau (DFP) and the amount of mechanical hysteresis (MH), statistical analyses were performed. Results: The Ormco-Reverse group exhibited a significant shift of the DFP end point toward the origin point (2.3 to 0.6 mm), an increase in the force level (1.2 to 1.3 N) and amount of MH (1.0 to 1.5 N) compared to the Ormco-Conventional group (all p < 0.001), which indicated that force could be constantly maintained until the end of the deactivation curve. In contrast, the GAC-Reverse group exhibited a significant shift of the DFP-end point away from the origin point (0.2 to 3.3 mm), a decrease in the force level (1.1 to 0.9 N) and amount of MH (0.6 to 0.4 N) compared to the GAC-Conventional group (all p < 0.001), which may hinder the maintenance of force until the end of the deactivation curve. Conclusions: The two commercially available NiTi-CCS groups exhibited different patterns of change in the force-deflection characteristics when the coiling direction was reversed.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2004년도 학술논문집
• /
• pp.285-291
• /
• 2004

LiCl-$Li_2O-O_2$ 용융염계에서 용융염 취급장치의 구조재료를 위한 평가의 일환으로 Inconel 718, X-750, Haynes 75, 263 합금의 부식거동을 분위기온도; $650^{\circ}C$, 부식시간: 24~168h, $Li_2O$농도; 3wt%, 혼합가스농도; Ar-10%$O_2$에서 조사하였다. LiCl-$Li_2O-O_2$ 용융염계에서 부식속도는 Haynes 263 ＜ Haynes 75 ＜ Inconel X-750 ＜ Inconel 718 순서로 나타났으며, Haynes 263 합금이 가장 우수한 내부식성을 나타내었다. Haynes 75의 부식생성물은 $Cr_2O_4$, $NiFe_2O_4$, $LiNiO_2$, $Li_2NiFe_2O_4$, Inconel 718의 부식생성물은 $Cr_2O_4$ 및 $NiFe_2O_4$ 이며 Haynes 263은 $Li(Ni,Co)O_2$, $NiCr_2O_4$ 및 $LiTiO_2$, Inconel X-750은 $Cr_2O_3$, $NiFe_2O_4$,$FeNi_3$, (Al,Nb,Ti)$O_2$의 부식생성물을 나타내었다. Haynes 263은 국부부식의 거동을 보이는 반면, Haynes 75, Inconel 718 및 Inconel X-750은 전면 부식 거동을 나타내었다.

• 열처리공학회지
• /
• 제21권6호
• /
• pp.307-313
• /
• 2008

The tensile deformation and shape recovery behaviors were studied in Ni-Ti shape memory wires showing different transformation characteristics by annealing at $200{\sim}600^{\circ}C$. Both R phase ${\rightarrow}$ B19' martensitic transformation at lower temperature and B2 ${\rightarrow}$ R phase transformation at higher temperature occurred in the shape memory wires annealed at $200{\sim}500^{\circ}C$. Transformation temperature and heat flow of B19' martensite increase but those of R phase main almost constant even with increasing annealing temperature. In the case of wires annealed and then cooled to $20^{\circ}C$, plateau on stress-strain curves in tensile testing can be observed due to the collapse of R phase variants and the formation of deformation-induced B19' martensite. In the case of wires annealed and then cooled to $-196^{\circ}C$, however, plateau on stress-strain curves does not appear and stress increases steadily with increasing tensile deformation. Comparing shape recovery rate with cooling temperature after annealing, shape recovery rate of the wire cooled to $20^{\circ}C$ is higher than that of the wire cooled to $-196^{\circ}C$ after annealing, and maximum shape recovery rate of 95% appears in the wire annealed at $400^{\circ}C$ and then cooled to $20^{\circ}C$. $R_s$ and $R_f$ temperatures measured during shape recovery tests are higher than $A_s$ and $A_f$ temperatures measured by DSC tests even at the same annealing temperature.