최근에 금속산화물을 증착하는 방법으로 용액공정이 주목 받고 있다. 용액 공정은 대기압에서 매우 간단한 방법으로 복잡한 공정과정을 요구하지 않기 때문에 박막을 경제적으로 간단하게 형성할 수 있다. 하지만 용액공정을 통해 형성한 박막에는 소자의 특성을 열화 시키는 solvent와 탄소계열의 불순물을 많이 포함하고 있어 고온의 열처리가 필수적이다. 박막의 품질을 향상시키기 위해서 다양한 열처리 방법들이 이용되고 있으며, 일반적인 열처리 방법으로는 furnace를 이용한 conventional thermal annealing (CTA)이 많이 이용되고 있다. 하지만, 최근에는 microwave를 이용한 공정이 주목 받고 있다. Microwave energy는 CTA보다 효과적으로 비교적 낮은 온도에서 높은 열처리 효과를 나타낸다. 본 실험은 n-type Silicon 기판에 solution-ZrO2 산화막을 형성 후, oven baking을 한 뒤, CTA와 microwave를 이용하여 solvent와 불순물을 제거 하였다. 전기적 특성을 확인하기 위해 solution ZrO2 산화막 위에 E-beam evaporator를 이용해 Ti 금속 전극을 증착하여 Metal-Oxide-Semiconductor (MOS) capacitor를 제작하였다. 다음으로, PRECISION SEMICONDUCTOR PARAMETER ANALYZER (4156B)를 이용하여, capacitance-voltage (C-V) 특성 및 current-voltage (I-V) 특성을 비교하였다. 다음으로, CTA를 통하여 제작한 소자와 전기적 특성을 비교하였다. 그 결과, Microwave irradiation으로 열처리한 MOS capacitor 소자에서 capacitance 값과 flat band voltage, hysteresis 등이 개선되는 효과를 확인하였다. Microwave irradiation 열처리는 100oC 미만의 온도에서 공정이 이루어짐에도 불구하고 시료 내에서의 microwave 에너지의 흡수가 CTA 공정에서의 열에너지 흡수보다 훨씬 효율적으로 이루어지며, 결과적으로 ZrO2 용액의 불순물과 solvent를 낮은 온도에서 제거하여 고품질 박막 형성에 매우 효과적이라는 것을 나타낸다. 따라서, microwave irradiation 열처리 방법은 비정질 산화막이 포함되는 박막 transistor 소자 제작에 대하여 결정적인 열처리 방법이 될 것으로 기대한다.
Objectives: The aim of this study was to compare the push-out bond strength and dentinal tubule penetration of root canal sealers used with coated core materials and conventional gutta-percha. Materials and Methods: A total of 72 single-rooted human mandibular incisors were instrumented with NiTi rotary files with irrigation of 2.5% NaOCl. The smear layer was removed with 17% ethylenediaminetetraacetic acid (EDTA). Specimens were assigned into four groups according to the obturation system: Group 1, EndoRez (Ultradent Product Inc.); Group 2, Activ GP (Brasseler); Group 3, SmartSeal (DFRP Ltd. Villa Farm); Group 4, AH 26 (Dentsply de Trey)/gutta-percha (GP). For push-out bond strength measurement, two horizontal slices were obtained from each specimen (n = 20). To compare dentinal tubule penetration, remaining 32 roots assigned to 4 groups as above were obturated with 0.1% Rhodamine B labeled sealers. One horizontal slice was obtained from the middle third of each specimen (n = 8) and scanned under confocal laser scanning electron microscope. Tubule penetration area, depth, and percentage were measured. Kruskall-Wallis test was used for statistical analysis. Results: EndoRez showed significantly lower push-out bond strength than the others (p < 0.05). No significant difference was found amongst the groups in terms of percentage of sealer penetration. SmartSeal showed the least penetration than the others (p < 0.05). Conclusions: The bond strength and sealer penetration of resin-and glass ionomer-based sealers used with coated core was not superior to resin-based sealer used with conventional GP. Dentinal tubule penetration has limited effect on bond strength. The use of conventional GP with sealer seems to be sufficient in terms of push-out bond strength.
자외선차단 화장품은 기능성 화장품 중의 하나로서, 유 무기 자외선차단물질이 함유되어 있다. 무기계 자외선차단제는 주로 산화아연, 이산화티탄 등이 있다. 무기계 자외선차단제는 입자의 지름이 60 ~ 100 nm로 자외선 A, B의 차단능이 좋은 것으로 알려져 있다. 또한자외선을 포함한 태양광선에 대해 비활성이 크고 안전성이 우수하다. 그리고 유기계 자외선차단제처럼 피부에 흡수 또는 축적되지 않으므로 피부자극이나 알레르기를 유발하지 않는다. 본 연구에서는 판상 무기안료인 마이카, 자외선차단 효과를 갖는 이산화티탄 나노입자, 소수성 실리카를 각각 계면활성제로 표면처리 하였고, 각 물질의 전하 차이에 따른 비화학적인 상호 인력 작용에 의해 마이카에 이산화티탄 나노입자, 실리카를 물리적으로 흡착시켰다. 이후, 소수성 표면처리제인 실란을 표면처리 하여 소수성을 갖는 자외선 차단 판상 마이카 복합체를 제조하였다. 자외선 차단 판상 마이카 복합체는 일반적인 나노입자 이산화티탄의 응집성을 개선하고 균일한 분산에 따른 자외선차단 효과가 증대되었으며, 소수성으로 표면처리를 하여 화장품 제형에서의 분산안정성을 크게 개선할 수 있었다. 안료의 표면전하는 제타전위로 평가하였으며, 제조된 자외선차단 마이카 복합체의 특성 평가는 FE-SEM, XRD, FT-IR, UV-VIS 등으로 확인하였다.
치환형 Ba-ferrite의 수소환원 거동은 순수한 Ba-ferrite와는 다르게 나타났다. 환원온도 250 .deg. C에서 520 .deg. C의 범위에서 치환형 Ba-ferrite의 보자력은 증가하다가 다시 감소하는 반면에 순수한 Ba-ferrite는 계속 감소 하였다. 치환형 Ba-ferrite의 환원과정은 환원되는 정도에 따라 3단계로 나뉘어진다. 1과 2단계에서 Ba-ferrite의 구조는 그대로 유지를 하지만 자기적 성질은 다르게 나타났다. 1단계에서 보자력은 증가하고 산화처리시 가역적이지만, 2단계에서는 보자력이 더욱 증가하고 산화처리시 비가역적이었다. 그러나 3단계에서는 Ba-ferrite 구조 자체가 붕괴되어 .alpha. -Fe와 소량의 BaFe $O_{3-x}$의 생성으로 $H_{c}$는 크게 감소하고 포화자화값은 130 emu/g으로 크게 증가하였다. 이 때 보자력 분포도는 크게 넓어지며 입자크기도 감소하였다. 또한 치환이온들은 환원과정에서 Ba-ferrite 구조의 붕괴를 억제하였으며, 2a + 4 $f_{IV}$ , 2b 및 12k 자리의 치환이온들이 4 $f_{VI}$ 와 12k'의 자리로 이동함을 확인하였다. 따라서 1과 2단계에서의 보자력 증가원인은 치환이온의 자리이동에 따른 고보자력 상의 생성 때문이었다.
쇠고기 단백질 소화에 미치는 마늘의 영향을 검토하기 위해 마늘첨가량, 숙성기간에 따른 효소소화율 및 소화저해물질(Trypsin Inhibitor, TI)의 변화를 실험하였다. 또한 효소 가수분해물의 gel여과 및 가용성부분의 질소량을 정량하여 단백질의 구조 변화를 확인하였으며, 소화율과 아미노산조성 결과를 토대로 예측소화율(Predicted Digestibility, P-dig.), 계산단백효율비(Computed Protein Efficiency Ratio, C-PER) 및 분별계산단백효율비(Discriminant Computed Protein Efficiency Ratio, DC-PER)를 계산하여 단백질 품질을 평가하였다. 쇠고기단백질 소화율은 첨가되는 생마늘량에 약간 영향을 받으나 최적 참가량은 첨가 후의 가열조건에 의하여 결정된다($96{\pm}1^{\circ}C$, 20분 가열시 쇠고기 : 마늘=100g : 12g, 60분 가열시 쇠고기 : 마늘=100g : 3g) 열변성된 쇠고기에 대한 생마늘의 효과는 없고, 날쇠고기육의 소화에는 생마늘의 효과만 인정되며 이미 가열된 쇠고기육의 소화에는 영향을 미치지 못하였다. 날쇠고기를 $4~6^{\circ}C$에서 숙성시켰을 때, 최대의 소화율을 나타내는 시간은 마늘 첨가량에 따라 달라 날쇠고기 100g에 마늘 3g을 첨가할 경우에는(A) 8시간, 12g일 경우에는(B) 12시간이었다. 마늘과 함께 숙성시킨 쇠고기육은 (A)의 경우 $96{\pm}1^{\circ}C$에서 80분, (B)의 경우 20분 정도 가열했을 때 최대소화율을 나타내었다. Four-enzyme으로 가수분해한 숙성시료에는 2,200 dalton 정도의 저분자량의 peptid가 생성되어 소화가 용이함을 확인했으며, 가용성부분도 소화율에 비례하여 증가하였다. 효소소화율에 비례하여 C-PER은 증가하여 C-PER 2.14(날쇠고기)에서 2.50(마늘과 함께 숙성시킨 시료)로 품질이 개선되었다.
The colorfastness of dying persipiration and laundry on summer clothing must be considered, because it has special relation to the human body. The colors of fibers as cotton, p/c, acryl, polyester and nylon which have been widely used for blouse and T-Shirt of Knitted wear are R-P, Y-G, BI-B and print. Studies were carried out with persipirometer, for the natural fiber of cotton the chemical one of nylon, with additional stuff involved, which polluted. The experiment was conducted to colorfastness with acid solution and alkaline solution to see the alteration of color and staining of man-made persiperation. The results obtained from this experiment can be summerized as follows. 1. The order of color alteration isnylon < p/c < coton < polyester < acryl, and the nylon shows the lowest colorfastness, which is 3 class, and the acrly shows the highest colorfateness, which is 5 class. The staining of multifiber test of cotton fabric is nylon < p/c < polyester < cotton < acryl. The staining of multifiber of nylon fabric is nylon polyester < p/c < cotton < acryl. 2. In acid solution and alkaline solution, the alteration of color and staining makes almost no difference, but concerning staining of cotton, the acid solution is lower than the case of alteration solution only. 3. In the pollution on cotton and nylon, the latter is more easily polluted than the former regardless of fabrics. Especially in case of polluted nylon, ti shows the lowest color fastness (2 class), which causes a problem of the dying process and dye stuffs. 4. No difference of color alteration shows among them, but R-P and print show low color fastness (2 class), especially printed nylon shows the lowest value (1 class).
투명전극은 디스플레이, 태양전지와 같은 광전자 소자에 필수적이며, 지금까지 개발된 재료 중에는 ITO가 가장 투명하면서 전기전도도가 높고 생산성도 좋기 때문에 투명전극의 재료로 사용하고 있다. ITO는 낮은 비저항(${\sim}10^{-4}{\Omega}cm$) 과 높은 투과율 (~85 %), 상대적으로 넓은 밴드갭 에너지 (3.5 eV) 의특성과 같이 뛰어난 전기적 광학적 특성에 반해서 높은 원자재 가격, 불안정한 공급량 등으로 인한 문제점이꾸준히 제기되고 있다. 따라서 $In_2O_3$:Sn, ZnO:Al, ZnO:Ga, ZnO:F, ZnO:B, TiN 등과 같은 물질들로대체하려는 연구가 활발하게 진행되고 있다. ZnO는 ITO보다원자재의 수급이 원활하기 때문에 원가가 낮으며, 상대적으로 낮은 온도에서도 제작이 가능하다. 또한 화학적으로 안정적이므로 ZnO에 Al, Ga 등의 3족 원소를 도핑함으로써 낮은 비저항의 박막 제작이 가능하고, ITO 박막과 비교하여 etching이 쉬우며 기판과의 접착성이 좋으며, sputtering 공정시 plasma 분위기에서의 안정성이 뛰어나고 박막증착율이 높기 때문에 투명전극으로 적합한 재료이다. 본 연구에서는 cylindrical type의 Aldoping된 ZnO single target을 사용하여 박막 증착 압력의 변화를 주어 유리기판 위에 DC sputtering을 하였다. Fieldemission scanning electron microscope (FESEM)을 통해 ZnO:Al 박막의 표면의 형상과 두께를 확인하였으며, X-ray diffraction (XRD) 분석을 통해 박막의 결정학적 특성을 관찰하였다. 투명전극용 물질로서 ZnO:Al 박막의 적합성 여부를 확인하기 위하여 Van der Pauw 방법을 이용하여 박막의 비저항, 전자 이동도, 캐리어 농도를 측정하였으며, 박막의 기계적 성질 및 표면 접착성을 확인하기 위하여 nano-indentaion 분석을 하였다. 또한 UV-vis spectrophotometer를 이용하여 ZnO:Al 박막의 투과율을 분석하여 투명전극으로의 응용 가능성을 확인하였다.
본 논문에서는 능동형 RFID 시스템용 고속 태그 수집을 위한 개선된 알로하 알고리즘을 제안하고, 이를 TI사의 CC2530 칩을 사용하여 태그와 리더기 각각의 기능을 구현하여 시험함으로써 그 성능을 증명하였다. 기존의 ISO/IEC 18000-7 등의 능동형 RFID 규격에서 제시하고 있는 태그 수집 알고리즘에서는 리더기와 태그의 통신이 성공적으로 종료된 후 리더기가 각 태그들에게 별도의 슬립 명령을 전송하는 반면, 제안된 방식에서는 통신이 종료된 태그들은 두 번째 명령어를 확인한 후 즉시 슬립 모드로 진행할 수 있도록 함으로써 리더기의 태그 수집 시간을 대폭 감소시켰다. 리더기와 태그를 구현하여 시험한 결과 30개의 태그가 평균 400 ms 이내에서 모두 인식되었으며, 1초 이내에 인식되는 인식률은 99.7% 이상임을 확인하였다. 리더기와 태그 간의 거리가 2m 이내인 경우 태그는 100% 인식되었으며, 2.5m 이내인 경우와 3m 이내인 경우 초당 인식 확률이 각각 99.94%와 99.7%였다. 각 거리의 경우를 평균하여 99.91%로 나타남으로써 실제 현장에의 적용 가능성을 보였다.
Purpose: The aim of the present study is to evaluate the effect of repetitive distraction and compression on new bone formation during distraction period. Materials and methods: Sixteen healthy rabbits, weighing about 2.5kg, were used in this experiment. A unilateral mandibular osteotomy was performed in the left mandible and the distractor(Track 1 $plus^{(R)}$, Gebruder Martin $GmbH^{(R)}$, Germany) was fixed with four screws (Cross driver screw $TI^{(R)}$, Gebruder Martin $GmbH^{(R)}$, Germany). After 4 days, the mandibles were distracted at a rate of 0.6mm/day for 10 days to obtain the amount of 6mm distraction in the control group(n=4). In the experimental group A(n=6), they were distracted at a rate of 1.2mm/day for 5 days and then compression of 0.6mm length and distraction of 0.6mm per 12 hours were carried out as counter direction for 5 days, relatively. In the experimental group B(n=6), distraction of 1.2mm length and compression of 0.6mm length per 12 hours were repeated for 10 days to obtain the amount of 6mm distraction finally. The experimental animals were sacrificed at 2 and 4 weeks after surgery and block specimens were obtained. With histologic and histomorphometric analysis, we observed the histologic changes of the cells and bone formation after H-E and Masson- Trichrome staining and then, measured Bone Deposition Rate with TOMORO $ScopeEye^{TM}$ ver. 3.5(Olympus, Japan), Results: Histologically, new bone formation was examined in all experimental groups and the control. But, the ability of bone formation of the experimental group A was somewhat better than any other groups. On the histomorphometric analysis, Bone Deposition Rate was higher in the experimental group A$(50.67{\pm}4.36%)$ than in the control group$(45.94{\pm}3.97%)$ and in the experimental group B$(42.68{\pm}5.70%)$. These data showed significant differences statistically(p<0.05). Conclusion: These results show that the distraction osteogenesis using repetitive compression and distraction force in the early consolidation period may be effective for new bone formation.
Elshiyab, Shareen H;Nawafleh, Noor;Ochsner, Andreas;George, Roy
The Journal of Advanced Prosthodontics
/
제10권1호
/
pp.65-72
/
2018
PURPOSE. The aim of this in vitro study was to investigate the fracture resistance under chewing simulation of implant-supported posterior restorations (crowns cemented to hybrid-abutments) made of different all-ceramic materials. MATERIALS AND METHODS. Monolithic zirconia (MZr) and monolithic lithium disilicate (MLD) crowns for mandibular first molar were fabricated using computer-aided design/computer-aided manufacturing technology and then cemented to zirconia hybrid-abutments (Ti-based). Each group was divided into two subgroups (n=10): (A) control group, crowns were subjected to single load to fracture; (B) test group, crowns underwent chewing simulation using multiple loads for 1.2 million cycles at 1.2 Hz with simultaneous thermocycling between $5^{\circ}C$ and $55^{\circ}C$. Data was statistically analyzed with one-way ANOVA and a Post-Hoc test. RESULTS. All tested crowns survived chewing simulation resulting in 100% survival rate. However, wear facets were observed on all the crowns at the occlusal contact point. Fracture load of monolithic lithium disilicate crowns was statistically significantly lower than that of monolithic zirconia crowns. Also, fracture load was significantly reduced in both of the all-ceramic materials after exposure to chewing simulation and thermocycling. Crowns of all test groups exhibited cohesive fracture within the monolithic crown structure only, and no abutment fractures or screw loosening were observed. CONCLUSION. When supported by implants, monolithic zirconia restorations cemented to hybrid abutments withstand masticatory forces. Also, fatigue loading accompanied by simultaneous thermocycling significantly reduces the strength of both of the all-ceramic materials. Moreover, further research is needed to define potentials, limits, and long-term serviceability of the materials and hybrid abutments.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.