• Journal of the Korean Ceramic Society
• /
• v.40 no.7
• /
• pp.637-643
• /
• 2003

In order to improve the photoluminescent properties and crystallinity, Zn$_2$SiO$_4$:Mn, M(M=Cr, Ti) phosphors were synthesized by the sol-gel method. The willemite single phase was obtained at 110$0^{\circ}C$, which is lower temperature than that of the conventional solid-state reaction (130$0^{\circ}C$). The characteristics of fired samples were obtained by a 147 nm excitation source under VUV (Vacuum Ultraviolet). To investigation the effect of co-dopant, the content of Mn and the ratio of $H_2O$ to TEOS was fixed as 2 ㏖% and 36. 1, respectively. The highest emission intensity was obtained when the concentration of Cr and Ti was 0.1 ㏖% relative to Zn$_2$SiO$_4$:Mn. While the emission intensity decrease continuously the decay time improved as increased the Cr concentration. In the case of Ti added samples, however, the emission intensity increase up to 2 ㏖％ concentration.

• Proceedings of the Optical Society of Korea Conference
• /
• 2009.10a
• /
• pp.305-307
• /
• 2009

• Bulletin of the Korean Chemical Society
• /
• v.31 no.8
• /
• pp.2170-2174
• /
• 2010

The surfaces of $TiO_2$ and ZnO nanoparticles have been modified by gold (Au) nanoparticles by a reduction method in solution. Their interfacial electronic structures and optical absorptions have been studied by depth-profiling X-ray photoelectron spectroscopy (XPS) and UV-vis absorption spectroscopy, respectively. Upon Au-modification, UV-vis absorption spectra reveal a broad surface plasmon peak at around 500 nm. For the as-prepared Au-modified $TiO_2$ and ZnO, the Au $4f_{7/2}$ XPS peaks exhibit at 83.7 and 83.9 eV, respectively. These are due to a charge transfer effect from the metal oxide support to the Au. For $TiO_2$, the larger binding energy shift from that (84.0 eV) of bulk Au could indicate that Au-modification site of $TiO_2$ is different from that of ZnO. On the basis of the XPS data with sputtering depth, we conclude that cationic (1+ and 3+) Au species, plausibly $Au(OH)_x$ (x = 1-3), commonly form mainly at the Au-$TiO_2$ and Au-ZnO interfaces. With $Ar^+$ ion sputtering, the oxidation state of Ti dramatically changes from 4+ to 3+ and 2+ while that (2+) of Zn shows no discernible change based on the binding energy position and the full-width at half maximum (FWHM).

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.234-238
• /
• 1987

In this paper, the used specimen composition was added basic additives ($Bi_2O_3\;lmol%$, $Sb_2O_3\;lmol%$, CoO 0.5 mol%, MnO 0.5mol%) to ZnO powder, and $TiO_2$ (1,2,3,4 mol%) to the above basic composition. It appears that there are four regions of conduction current depended upon the strength of the applied electric field ; Ohimic region, Poole-Frenkel region, Schottky region and Tunneling region. Increasing of $TiO_2mol%$, the breakdown voltages of ZnO ceramic varistors are decreased. The decrease of breakdown voltages was explained with the decrease of potential barrier height. Moreover, V-I characteristics with temperature dependence are decreased with increasing of $TiO_2mol%$.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.10a
• /
• pp.189.2-189
• /
• 2003

• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.956-960
• /
• 1998

Cu-Zn and Cu-Zn-Ti catalysts for the steam reforming of methanol were prepared. This reaction was carried out at atmospheric pressure, $250^{\circ}C$, steam/methanol molar ratio 1.5, and contact time 0.1 g-cat.hr/mL-feed. In case of the catalyst with 3 mol% of $TiO_2$, the activity was superior to that of catalysts without $TiO_2$. The reaction products were mainly hydrogen and carbon dioxide. It was found that catalytic activity was not related to specific surface area but affected by metallic copper area which was measured by $N_2O$ decomposition and increased with the addition of $TiO_2$ content. XPS and XRD showed that the oxidation state of zinc was not changed during reaction, but oxidation states of copper existed in Cu(0) or Cu(I).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.258.2-258.2
• /
• 2015

염료감응형 태양전지(Dye-Sensitized Solar Cells; DSSC)는 공정비용과 재료가 저렴하여 차세대 태양전지로 각광받고 있다. 특히 투명한 재료를 사용하므로 flexible한 기판을 이용하여 그 적용범위가 넓다. DSSC는 상부전극인 FTO와 전해질의 접촉으로 인해 일부 FTO의 전자가 외부로 나가지 못하고 산화환원 반응에 의해 도로 전해질로 들어갈 확률이 있다. 이로 인해 효율 감소문제를 야기 할 수 있다. 이를 해결하기 위해 FTO위에 여러 물질들을 증착하거나 코팅 등의 많은 연구가 이루어져 왔다. ZnO를 DSSC로 적용한 연구는 많이 이루어졌지만 대부분 공정이 Chemical Vapor Deposition (CVD)으로 진행 되어왔다. 본 연구에서는 FTO위에 ZnO를 진공 공정에 비해 저렴하고 간단한 spin-coating으로 blocking layer를 형성하였다. 그 후 염료에서 여기 된 전자를 FTO로 전달해 주는 역할을 하는 TiO2를 doctor blade방법으로 형성하였다. ZnO는 TiO2하고 전도대와 가전자대의 에너지 준위 차이가 거의 없고, ZnO의 전자 이동도가 TiO2보다 높기 때문에 FTO로 전자를 큰 저항 없이 전달 할 수 있다. 또한 투과율이 좋아 염료까지의 빛의 투과성도 뛰어나다. ZnO blocking layer를 형성하여 FTO에서 전해질로의 전자이동을 막아주는 역할을 하여 DSSC의 performance 향상을 확인하였다. Field Emission Scanning Electron Microscope(FE-SEM)을 통해 FTO/ZnO/TiO2의 계면 및 두께를 확인하였고. DSSC의 특성 분석을 위해 I-V curve, Power conversion efficiency, Impedance spectroscopy를 측정 하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.196.1-196.1
• /
• 2016

TCO(Transparent Conducting Oxide) on flat glass is used in thin-film photovoltaic cell, flat-panel display. Nowadays, Corning(R) Willow Glass(R), known as flexible substrate, has attracted much attention due to its many advantages such as reliable roll-to-roll glass processing, high-quality flexible electronic devices, high temperature process. Also, it can be an alternative to flexible polymer substrates which have their poor stability and degradation of electrical and optical qualities. For application on willow glass, the flexibility, electrical, optical properties can be greatly influenced by the TCO thin film thickness due to the inherent characterization of thin film in nanoscale. It can be expected that while thick TCO layer causes poor transparency, its sheet resistance become low. Also, rarely reports were focusing on the influence of flexible properties by varying TCO thickness on flexible glass. Therefore, it is very important to optimize TCO thickness on flexible Willow glass. In this study, Ti-ZnO thin films, with different thickness varied from 0 nm to 50 nm, were deposited on the flexible willow glass by atomic layer deposition (ALD). The flexible, electrical and optical properties were investigated, respectively. Also, these properties of Ti-doped ZnO thin films were compared with un-doped ZnO thin film. Based on the results, when Ti-ZnO thin films thickness increased, resistivity decreased and then saturated; transmittance decreased. The Figure of Merit (FoM) and flexibility was the highest when Ti-ZnO thickness was 40nm. The flexible, electrical and optical properties of Ti-ZnO thin films were better than ZnO thin film at the same thickness.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.4
• /
• pp.1605-1610
• /
• 2017

The electrochemical luminescence (ECL) device was investigated, which has similar structure to the dye-sensitized solar cell. The structure of the ECL cell in this experiment reliably induces a large amount of the oxidation around electrodes. The band gap of the ECL electrode is of 3.0 - 3.2 eV. Titanium dioxide ($TiO_2$) nanoparticle has following properties: a band gap of 3.4 eV, a low-priced material, and 002 preferred orientation (Z-axis). Zinc Oxide (ZnO) nanorod is easy to grow in a vertical direction. In this paper, in order to determine material suitable for the ECL device, the properties of various materials for electrodes of ECL devices such as ZnO nanorod (ZnO-NR) and $TiO_2$ nanoparticle ($TiO_2-NP$) were compared. The threshold voltage of the light emission of the ZnO-NR was 2.0 V which is lower than 2.5 V of $TiO_2-NP$. In the other hand, the luminance of $TiO_2-NP$ was $44.66cd/m^2$ and was higher than that of $34cd/m^2$ of ZnO-NR at the same applied voltage of 4 V. Based on the experimental results, we could conclude that $TiO_2-NP$ is a more suitable electrode material in ECL device than the ZnO-NR.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.3
• /
• pp.214-220
• /
• 1998

ZnO varistors are characterized by the features of excellent nonlinearity and surge withstand capability. In this paper, in order to investigate the use of ZnO varistor as surge absorption device in low voltage, metal oxide material($TiO_2$) was selected as control material of grain growth. Samples of ZnO varistors were fabricated with varying the contents, and then the microstructures and V-I characteristics were measured. It was observed by SEM that the mean grain size increased with the increase of the additive. From the measurement of V-I characteristics, it was observed that according to the increase of the quantity of $TiO_2$ as additive, the operating voltage was lowered.