• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.119-120
• /
• 2011

Kawazoe는 1997년 p-type TOS를 만들기 위해서는 3가지가 충족되어야 한다고 언급한바 있다. 첫 번째, 가시광영역에서 투명하기 위해서 cation의 d10s0이 가득 차야 한다. 가득 차지 않은 d10 shell은 광 흡수가 가능하여 투과도를 떨어뜨린다. N-type을 예로 들어 ZnO, TiO, In2O3가 각각 Zn2+, Ti4+, In3+가 되어 d shell을 가득 차게 만드는 것을 볼 수 있다. 두 번째, cation d10s0 shell은 산소의 2p shell과 overlap 되어야 한다. 이 valence band는 홀 전도를 더욱 좋게 한다. 예를 들어 Cu1+(3d), Ag1+(4d)가 해당한다. 세 번째로, 양이온과 산소간의 공유결합을 강하게 하기 위해서 결정학적 구조는 매우 중요하다. Delafossite 구조는 산소가 pseudo-tetrahedral 구조로서 공유결합에 유리하다. 이러한 환경은 O2- (2p6)을 형성하고 홀의 이동도를 증가시킨다. 예를 들어 Cu2O의 경우 앞의 2가지를 만족시키지만 광학적 특성에서 좋지 않다. 그 이유가 3번째 언급한 결정학적인 요인에 있다. 결정 계의 환경은 Cu2O를 따라가면서 3차원적인 연결을 2차원적으로 변형된 delafossite 구조에서는 quantum well이 형성되어 band gap이 커진다. 본 연구에서는 전기적 이방성을 가지고 있는 delafossite CuCrO2 상에서 우선배향을 일으키는 인자 중 기판을 변화시켜 실험을 진행하였다. 결과적으로 기판변화를 통해 우선배향조절이 가능하였으며 CuCrO2 박막을 시켰으며, 결정방향에 따른 전기적 물성의 이방성에 관한 연구는 계속 진행 중에 있다. c-plane sapphire 기판위에는 [00l]로 성장하는 반면, c-plane STO 기판 위에는 [015] 방향으로 성장하는 것을 확인하였다. 이러한 원인은 기판과 증착되는 박막간의 mismatch를 최소화 하여 strain을 줄이고, 계면에서의 Broken boning 수를 줄여 계면에너지를 낮추는 방법이기 때문일 것으로 예상된다. C-plane sapphire 기판위에 증착될 경우 증착온도가 증가함에 따라 c-축으로의 성장이 온전해지며 이에 따라 캐리어농도의 감소와 모빌리티의 증가가 급격하게 변하는 것을 확인할 수 있다. 반면 c-plane STO 기판에서는 증착온도에 따른 박막의 배향변화가 없으며 전기적 물성 변화 또한 비교적 작은 것을 간접적으로 확인하였다.

• Journal of Conservation Science
• /
• v.37 no.2
• /
• pp.144-153
• /
• 2021

Gwanghwadang-Wonsam was designated as National Folklore Cultural Heritage No. 52 in 1979, it is in good condition. However, a problem is the attached a phoenix insignia badge that did not exist when it was designated recently. As it became known as the only purple Wonsam artifact with "phoenix insignia", raising the need for its conservation. In this regard, scientific analysis was required to correct misinformation about designated cultural assets and restore the original designated state by analyzing the history of the Gwanghwadang-Wonsam, other relics of the phoenix insignia and its making design patterns. An X-ray fluorescence analysis was used to confirm that the Phoenix insignia's metal threads were titanium-plated silver. Phoenix insignia using titanium-plated gold thread was not identified in Gwanghwadang-Wonsam photographs in 1986, and the TiN-type membrane plating method was used in various industries in the 1990s, which can be estimated to be attached in the early and mid-1990s. Especially, the scientific analysis results from the X-ray fluorescence analysis in this study provide key evidence for conservation processing. This study demonstrates the importance of investigating relics and similar artifacts in the conservation process of inherited relics and as a precedent for restoration that corrects misinformation about designated cultural properties.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.3
• /
• pp.156-156
• /
• 2000

The piezoelectric properties and the doping effect for $0.95Pb(Zr_xTi_{l-x})O_3+0.O5Pb(Mn_{1/3}Nb_{2/3})O_3$compositions were studied. Also, the heat generation and the change of electromechanical characteristics, the important problem in practical usage, were investigated under high electric field driving. As a experiment results under low electric field, the value of $k_p$ and ${\varepsilon}_{33}^T$ were maximized, but $Q_m$ was minimized $(k_p=0.57, Q_m=1550)$ in the composition of x=0.51. In order to increase the values of $Q_m$, $Nb_2O_5$ was used as a dopant. As the result of that, the grain size was suppressed and the uniformity of grain was improved. Also, the values of $k_p$ decreased, and the values of $Q_m$ increased with doping concentration of $Nb_2O_5$ . As a experiment results under high electric field driving, when vibration velocity was ower than 0.6[m/s], the temperature increase was 20[℃], and the change ratio of mechanical quality factor was less than 10[%]. So, its electromechanical characteristics was very stable. Conclusively, piezoelectric ceramic composition investigated at this paper is suitable for application to high power piezoelectric devices.

• Tribology and Lubricants
• /
• v.24 no.3
• /
• pp.122-128
• /
• 2008

To reduce the friction losses and the wear amounts in the piston assembly two methods were proposed. One is the modification of surface profile of the skirt part. The surface coating is another method to protect the sliding surfaces. To modify the profile of the skirt surfaces the surfaces were ground to have three different shapes of profiles. Also, several coatings, such as graphite, TiN, and $MoS_2$, and DLC, were used to protect the surfaces of the piston skirts. The specimens of the skirt and the cylinder bores were tested with the reciprocating wear tester. SAE 5W40 engine oil was used in boundary lubrication regime. Among several coatings the graphite and DLC coatings were very effective to reduce the friction forces. Especially, DLC film represented much better tribological performances than the others. The friction coefficient of the graphite coating was the lowest, but the graphite coating was not effective to protect the surfaces.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05b
• /
• pp.836-839
• /
• 2011

염료감응형 태양전지의 상대전극으로 MWCNT(multi-walled carbon nanotube)의 농도 (0.01~0.06g)를 달리하여 FTO(fluorine-doped tin oxide) glass에 분산시켜 상대전극을 만들었다. 그리고 glass/FTO/$TiO_2$/Dye(N719)/electrolyte(C6DMII,GSCN)/MWCNT/FTO/glass 구조를 가진 0.45$cm^2$급 DSSC(dye-sensitized solar cells) 소자를 만들었다. 소자의 미세구조, 분산정도, 광특성은 각각 광학현미경, SEM, source measure unit (Keithley model 2400) 장비를 이용하여 확인하였다. MWCNT 농도 증가와 FTO의 거친 표면형상에 따라 비선형적으로 MWCNT 분산면적이 증가하였고, MWCNT 농도 0.06g일 때 FTO 표면에 전체적으로 MWCNT가 완전히 분산됨을 확인하였다. 소자의 광변환 효율은 MWCNT 분산면적에 비례하는 효율을 보였고, MWCNT 분산농도인 0.06g 일 때 4.49%의 광변환 효율을 얻을 수 있었다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.5
• /
• pp.16-22
• /
• 2013

A two-dimensional photonic crystal structure was investigated using a roll-to-roll nanoreplication and physical vapor deposition processes for the inexpensive enhanced fluorescence substrate which is not sensitive to the polarization directions of excitation light source. An 8 inch silicon master having nano dot array with a diameter of 200 nm, a height of 100 nm and a pitch of 400 nm was prepared by KrF laser scanning lithography and reactive ion etching processes. A flexible polymer mold was fabricated by flat type UV replication process and a deposition of 10 nm nickel layer as an anti-adhesion layer. A roll mold was prepared by warping the flexible polymer mold on an aluminum roll base and a roll-to-roll UV replication process was carried out using the roll mold. After the deposition of ~ 100 nm $TiO_2$ layer on the replicated nano dot array, a 2 dimensional photonic crystal structure was realized with a resonance wavelength of 635 nm for both p- and s-polarized light sources.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.751-755
• /
• 1997

This paper presents a new scheme of neural network controller to improve to improve the robustuous of robot manipulator using digital signal processors. Digital processors, DSPs, are micro-processors that are particularly developed for fast numerical computations involving sums and products of variables. Digital version of most advanced control algorithms can be defined as sums and producrs of measured variables, thus it can be programmed and executed through DSPs. In addition, DSPs are as fist in computation as most 32-bit micro-processors and yet at a fraction of their prices. These features make DSPs a viable computational tool in digital implementation of sophisticated controllers. During past decade it was proposed the well-established theorys for the adaptive control of linear systems, but there exits relativly little gensral theoral for the adaptive control of nonlinear systems. Perforating of the proposed controller is illustrated. This paper describes a new approach to the design of adaptive controller and implementation of real-time control for assembling robotic manipulator using digital signal processor. Digital signal processors used in implementing real time adaptive control algorithm are TMS320C50 series made in TI'Co..

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.02a
• /
• pp.11-18
• /
• 2002

The STD11 and KP4 are important steels and applied to the manufacturing of the die and mold. The purpose of this study is to investigate the machinability of tool steels of STD11(HRC60) and KP4(HRC32) when machining them by using ball end milling tools coated with TiAlN. Cutting forces by using a Kistler piezo-cell type tool dynamometer, surface roughness and tool wear by using tool microscope are used in the tests. The results from the cutting tests of KP4 specimens show that 85m/min. of cutting speed and 0.32mm/rev. of feed per revolution are optimum conditions for the higher productivity and 0.26mm/rev. with the same cutting speed are optimum conditions for better surface finishing. The results from machining STD11 workpiece at 30m/min. of cutting speed and 0.17m/rev. of feed per revolution show recommended for the higher productivity. The KP4 shows relatively smaller cutting forces than STD11 and STD11 shows the better surface finish than KP4.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.172-175
• /
• 2002

High speed machining is one of the most effective technologies to improve productivity. It can give great advantage for manufacture of die and Moulds. However, when machining of micro groove in high speed machining a severely thermal damage was generated on workpiece and cutting tool. Generally, the cutting fluid is used to improve penetration. lubrication. and cooling effect. In order to rise the performance of lubrication. it contains extreme pressure agents (Cl, S, P). But the environment of work room go bad by those additive. Therefore, the compressed chilly air with oil mist system was developed to replace the conventional cutting fluid system. This paper carried out the tests to evaluate the machinability by the cutting environment in high speed micro groove machining of NAK80 (HrC40). Compressed chilly air with oil mist was ejected on the contact area between cutting edge and workpiece. The effect of this developed compressed chilly air with oil mist system was evaluated in terms of tool life. The results showed that the tool lift of carbide tool coated TiAlN with compressed chilly air mist cooling was much longer than that of the dry and flood coolant when cutting the material.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.295-295
• /
• 2012

본 연구에서는 아크방전을 이용한 질화 티타늄의 합성 과정 중에서, 시편 청정 공정변수를 변화시킴에 따라 계면에서의 미세조직 변화와 코팅층의 물성을 평가하였다. 아크 소스에 장착된 타겟은 $120mm{\Phi}$, 99.5 %의 티타늄 타겟을 사용 하였고, 시편과 타겟 간의 거리는 약 30 cm이며, 시편은 SUS를 사용하였다. 시편을 진공용기에 장착하고 진공배기를 실시한 후 Ar 가스 분위기에서 시편에 전압을 인가한 후 아크를 발생시켜 약 5분간 시편 청정을 실시하였다. 이 시편 청정 과정에서 시편 인가전압을 0~1,000 V로 변화시켰고 시편 정청이 끝나면 시편에 인가된 전압을 차단하고 코팅하였다. 질화 티타늄의 두께는 약 $3{\mu}m$로 동일하게 코팅하였다. 시편 인가전압 변화에 따라 시편청정 공정 시 계면에서 티타늄층이 코팅되거나 모재 내부까지 침투하는 현상을 관찰하였다. 시편청정 공정변수 변화에 따른 질화 티타늄의 코팅을 통해 계면의 미세조직과 성분의 변화를 주사전자현미경, 투과전자현미경 이미지와 에너지 분산분광기 (Energy Dispersive Spectroscopy ; EDS)를 통해 확인하였으며 나노인덴터를 이용해 경도, 탄성계수 등의 물성변화를 측정하였다. 본 연구에서 얻어진 결과를 이용하여 시편 청정 공정 제어를 통한 다양한 물성변화가 가능 할 것으로 예상된다.