• 한국운동역학회지
• /
• 제13권3호
• /
• pp.181-197
• /
• 2003

The Purpose of this study was to examine the kinematic analysis of the upper-limb motion of wheelchair basketball free throw shooting. Three-dimensional kinematic data were obtained from 8 male wheelchair basketball players performing a successful free throw. Players were divided into three groups, according to their IWBF classification(Group 1: 1 point players, Group 2: 2-2.5point players and Group 3:3.5-4 point players) Wheelchair basketball free throw motions were taken by video camera. The three-dimensional coordinates was processed by DLT. Players from Group 1 and 2 tended to release the ball from a lower height, with greater velocity and release angle. Players from Group 1 showed greater shoulder horizontal adduction and horizontal abduction angle, wrist ulnar flexion and radial flexion angle, and trunk angle. but players from Group 2 appeared lower shoulder abduction. Upper limb angular velocity showed most greatly in hands from Group 1, upperarm from Group 2, and forearm from Group 3.

• 한국운동역학회지
• /
• 제13권1호
• /
• pp.185-204
• /
• 2003

The purpose of this study was to obtain the data for stable and accurate techniques of the free throw in basketball. The subjects of this study were seven male basketball player consisted of college students athletes. Free throw motions were taken by video camera. The three-dimensional coordinates was processed by DLT. The variables were the velocity, the angular velocity of the upper extremity segments, degree, and angular momentum. The result of analysis is summarized as follows. 1. The velocity and angular velocity of the upper extremity segment was showed an gradual increase and a smooth velocity transfer, transferring from proximal segment to distal segment at free throw motion in basketball. 2. The local term and remote term angular velocity momentum of the proximal segment showed larger than that of the distal segment in X, Y, Z axis component all. 3. The remote term angular momentum was showed larger than that of the local term angular momentum in X, Y, Z axis component all. 4. The angular motion of the upper trunk and upper arm, upper arm and forearm was showed in opposite direction and symmetrical angular momentum in local term angular momentum of the Y and Z axis component. 5. All the segments of upper extremity segment was showed left rotation in remote term angular momentum of the Y axis component and right rotation in remote term angular momentum of the Z axis component.

• 한국운동역학회지
• /
• 제12권1호
• /
• pp.173-191
• /
• 2002

The purpose of this study was defined efficient throw motion pattern to obtain the quantitative data and to achieve successful bowling through kinetic - kinematic variables on the throw motion. Subject of group composed of three groups : Higher bowlers who are two representative bowlers with 200 average points and one pro-bowler. Middle bowlers who are three common persons with 170 average points. Lower bowler who are three common persons with 150 average points. Motion analysis on throw motion in three groups respectively has been made through three-dimension cinematography using DLT method. Two high-speed video camera at operating 180 frame per secondary. One-way ANOVA has been used to define variable relations. Analyzed result and conclusion are the following : The displacement of back of the hand must have wider difference of each right-left displacement to increase the spin of the ball. In high bowlers group, difference between the front-rear position of back of the hand in case of success and that in case of failure in follow throw is 0.17m. That is to say, momentum in case of success come to increase greatly, compared with that in case of failure. To increase the spin of the ball, the potential difference should be narrower in follow through. In case of the high bowlers, the velocity of the front-rear direction of the back of the hand has been the fastest both in release and follow through, compared with those in other groups, which has contributed to increasing the spin force of the ball. The orders in the resultant velocity of the back of the hand has shown the this : the finger tip$\rightarrow$the back of the hand$\rightarrow$wrist.These orders made the proximal segment support the distal segment. The distal segment has provided the condition to accelerate the velocity. In case of failure, the suddenly increased velocity has caused the failure in the follow through. Acutely flexing the angle of the back of the hand has contributed to lifting to increase the spin of the ball.

• 터널과지하공간
• /
• 제20권5호
• /
• pp.360-368
• /
• 2010

이 논문은 발파석의 비산과 낙하를 조절하여 파쇄석이 사면의 낮은 쪽 소단에 분산될 수 있도록 한 노천발파에 대한 사례연구이다. 비산이 횡적인 분산과 파쇄석 더미의 이완을 초래하는 동안 낙하는 굴착기에 의한 굴착이 용이하도록 파쇄석 더미의 높이를 낮춰주는 역할을 한다. 이런 면에서 이 논문에서는 몇몇 발파설계 변수들을 조정하는데 주안점을 두었다. 대상 사면은 사암 벤치로서 벤치의 평균 높이는 22~24 m이다. 이 사면은 굴착심도가 14 m인 10 $m^3$ 용량의 로우프 쇼벨 작업이 가능하도록 조성되었다. 비산과 낙하를 조절한 새로운 발파설계 결과를 이 현장에서 적용되고 있던 상단(10~14 m)과 하단(12~15 m)의 이단식 발파 결과와 비교하였다. 파쇄석의 입도와 그 분포 및 쇼벨의 굴착 싸이클 시간들을 비교하였다.

• 자원ㆍ환경경제연구
• /
• 제31권3호
• /
• pp.319-342
• /
• 2022

본 연구는 2019년 부산광역시 일부 자치구의 종량제봉투 가격 인하 사례를 이용하여 자연실험 합성집단통제 이중차분법을 통해 종량제봉투 가격이 생활폐기물 배출량에 미치는 영향을 분석했다. 수요 및 가격탄력도를 추정할 때 흔히 발생할 수 있는 내생성 문제를 고려하기 위해 가격 동결 자치구를 합성통제집단으로, 가격 인하 자치구를 처치집단으로 설정하여 분석했다. 분석 결과, 수요의 가격탄력도는 0.05~0.11 수준으로 종량제봉투 가격은 판매량에 거의 영향을 미치지 못했다. 종량제봉투는 필수재적 성격이 강하고 가구 소득에서 차지하는 비중이 매우 작기 때문으로 보인다. 이는 종량제봉투의 수요곡선이 거의 수직에 가까우므로 폐기물 감소 목표 달성을 위해서는 가격정책 보다 수요곡선 자체를 이동시킬 수 있는 정책이 더욱 효과적일 수 있음을 시사한다.

• 대한기계학회논문집B
• /
• 제30권8호
• /
• pp.715-721
• /
• 2006

In the present work, nozzle shape of a jet fan is optimized numerically using three-dimensional Reynolds-averaged Navier-Stokes analysis. Standard $k-{\epsilon}$ model is used as a turbulence closure. Response surface method is employed as an optimization technique. The objective function is defined as maximum throw distance. Three geometric variables, i.e., length and angle of nozzle, and interval between two nozzles, are selected as design variables. As the main result of the optimization, the throw distance has been improved effectively.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1513-1516
• /
• 2003

A crank throw, which is one of the crankshaft part for a large diesel engine is manufactured by closed die forging or open die forging. For the purpose of improvement of productivity the open die forging is usually adopted these days. However it has disadvantage of low yield ratio compare to closed die forging. To overcome this problem, the material properties for hot top and bottom zones of ingot are investigated to utilize them to the product and a modified forging process to reduce the material loss of ingot body through forging analysis according to forging factors(a , R, Ø$\sub$B/, Ø$\sub$D/) is suggested.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1995년도 추계학술대회논문집
• /
• pp.157-166
• /
• 1995

A large crank shaft for ship engine consists of several components, such as throw, jornal, pin and flange. These compoents are individually made by open-die forging followed by machining and they are thermally fitted to form the crankshaft. In the present investigation, it was attempted to design an optimum preform for the throw by use of the spread coefficient. The spread coefficient found in the literature was confirmed by comparison with experimental results using plasticine. However, the preform designed by the spread coefficient was unable to produce the final product. The reason was found that the spread coefficient differs distinctly for the magnitude of bite ratio. Therefore, another spread coefficient, especially for low bite ratios, was proposed and the preform was redesigned. It was found that the new preform was able to produce the final product.

• 한국정밀공학회지
• /
• 제13권1호
• /
• pp.123-130
• /
• 1996

The procedure on the design of a new tungsten cabide throw-away cutting tool system for deep grooving or cut-off machining is suggested. For relieving the maximum stress level at the corner radius of the blade holder, the finite element method is used. Also the pulling test device is proposed for measuring the holding force of the insert between the blade holder and the insert considering the materials in contact and configuration parameters of the holder.

• 한국운동역학회지
• /
• 제19권2호
• /
• pp.347-357
• /
• 2009

본 연구의 목적은 농구 자유투 동작 시 근전도 분석 및 지면 반력 분석을 통해 숙련자와 미숙련자 간의 차이를 비교분석하는데 있다. 근전도 분석을 위해 7쌍의 표면전극을 피험자의 요측수근굴근, 장요측수근신근, 상완이두근, 상완삼두근, 대퇴직근, 전경골근, 내측 비복근, 접지전극은 상전장골근에 부착하였다. 두 대의 지면반력기를 통해 전 후, 좌 우, 수직 방향에 작용하는 지면반력과, 압력 중심 이동을 측정하였다. 숙련자의 경우 볼을 투사하기까지 근육활동이 미숙련자에 비해 상대적으로 낮은 근육활동을 나타내었다. 이는 자유투 동작 시 볼 을 투사하는데 있어서 숙련자가 미숙련자보다 낮은 근육활동으로도 효율적으로 볼을 투사 한다는 것을 알 수 있다. 미숙련자는 불필요한 좌우 방향의 힘의 이동을 발생시켜 자유투를 안정적으로 수행하지 못하는 것으로 나타났으며 숙련자의 경우에는 원활한 전후 방향의 지면반력과 압력 중심 이동을 통해 안정적으로 볼을 투척하는 것으로 판단되어진다. 따라서 자유투 동작은 상지와 하지의 협응성과 유연성을 통해 안정된 슈팅 동작이 이루어질 것으로 사료된다.