• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.5
• /
• pp.861-868
• /
• 2010

As CAS, X-ATK, and INT models considered as the most typical Air-to-Ground operation models in ROKAF are mainly designed as the voice-centered system between aircraft and ground control facilities, it is critical to newly develop the Link-16 based model for the ROK-US combined operation between F-15K, AWACS, M-SAM, and KDX-III equipped with Link-16. Former studies had been limited to the CAS operation, and they had mainly focused on reducing the voice transmission time to exchange the information between each mission step with maintaining existing operation steps. Therefore, this paper makes up the weak point in former studies, thereby designing new Air-to-Ground operation model for CAS, X-ATK, INT mission using Enterprise Architecture OV6c, which enables both aircraft and ground control facilities or between aircraft to obtain the real-time information on the location, identification, armament and the real-time image data through the broadcasting function. Based on the analysis of new operation model, we come to a conclusion that by simultaneously exchanging the information on mission between nodes concerned through the broadcasting function of Link-16. It is possible to cut down superfluous steps among the mission steps, and to reduce the mission time. It is clear that it gives rise to improve the battle efficiency and the decision-making tempo as well as the battlefield situational awareness.

• Korean Journal of Remote Sensing
• /
• v.29 no.3
• /
• pp.337-349
• /
• 2013

Communication Ocean Meteorological Satellite (COMS) for the hybrid mission of meteorological observation, ocean monitoring, and telecommunication service was launched onto Geostationary Earth Orbit on June 27, 2010 and it is currently under normal operation service on $128.2^{\circ}$ East of the geostationary orbit since April 2011. In order to perform the three missions, the COMS has 3 separate payloads, the meteorological imager (MI), the Geostationary Ocean Color Imager (GOCI), and the Ka-band antenna. The MI and GOCI perform the Earth observation mission of meteorological observation and ocean monitoring, respectively. For this Earth observation mission the COMS requires daily mission commands from the satellite control ground station and daily mission is affected by the satellite control activities. For this reason daily mission planning is required. The Earth observation mission operation of COMS is described in aspects of mission operation characteristics and mission planning for the normal operation services of meteorological observation and ocean monitoring. And the first one-year normal operation results after the In-Orbit-Test (IOT) are investigated through statistical approach to provide the achieved COMS normal operation status for the Earth observation mission.

• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.222-229
• /
• 2022

Through this technology development, companies that operate online shopping malls and prospective startups will support education, consulting and expert group matching so that they can solve various issues that may arise in the course of the entire business life cycle, from startups to closures. It is expected that differentiated consulting programs will be designed for companies that currently operate shopping malls and start ups, and customized consulting programs will be provided to improve the effectiveness of consulting while improving customer satisfaction. It is planning to develop a "successful start-up and operation helper" that helps successful start-ups. It is a system that primarily diagnoses problems of prospective entrepreneurs and operators through an automation system at the start-up and operation stage, and professional consultants participate to derive and solve problems, and takes care of all stages of shopping mall birth and growth. In this paper Metaverse based shopping mall Creation is also discussed. Through Big Data creation these accumulated data, we intend to help operators start and operate shopping malls through accurate information by managing all knowledge of shopping malls as a system in the long run.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.263-268
• /
• 2011

There are many exclusive freight cars in railway freight transportation system. Gondola is one kind of freight cars. Gondolas have a role to carry bulk-type cargo such as coals and ores. A few problems are occurring due to exclusive freight cars. Operation company has redundant freight cars because exclusive freight cars can carry limited items. And purchasing cost of freight cars is higher and higher because of irregular bid. Operation efficiency of gondola is very low because return time of gondola is much longer than that of container car. In this study, we analysed the introduction effect of hopper-type container for through transit. First, we identified the characteristics of spatial distribution on freight stations. And we provided the effect of hopper-type container in terms of operation efficiency, cost reduction, new demand excavation and image enhancement of eco-friendly railroad.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 1999.02a
• /
• pp.81-84
• /
• 1999

The purpose of this paper is to find the magnetic field distribution inside the motor in order to find out if the high-Tc superconducting tapes operate stably in actual motor operation. With this gola, magnetic field distribution in a detailed model of the actual motor was analyzed through F.E.M. (Finite Element Method). As a result, it has been proved that the high-Tc superconducting tapes can withstand 4 A of current with stability. 4 A was the amount of current needed to achieve 600 A ·turns which is required by the previous simulation aimed at developing this motor. Also, it has been observed that the flux damper reduces armature reactance during the motor operation and during load changes, helping the stable motor operation. But, it was observed that the flux damper generates loss by means of leakage flux and this decreases the output of the motor by about 5%.

• Journal of Technology Innovation
• /
• v.10 no.1
• /
• pp.174-200
• /
• 2002

Technological capabilities of POSCO (Pohang Iron & Steel Co.) have been developed through acquisition, catch-up, and generation stage. In 1970s standardized operation technologies were acquired based on Japan's technological cooperation. The prime route of technological acquisition was overseas training and operation technologies were articulated by mock and real operation. In 1980s POSCO focused to catch-up advanced technologies through in-house R&D activities. Technological informations were broadly accumulated, task force teams were constructed for important technological tasks, and the scope of technological innovation covered nearly all fields. In 1990s POSCO launched long-term projects based on the large-scale investment and challenged the new fronts of steel technologies. Frontier technologies such as smelting reduction and thin slab casting were early commercialized and new technological concepts were emerged. In conclusion, this article suggests some implications on the development of technological capabilities in Korea.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.9 no.4
• /
• pp.545-551
• /
• 1997

As the cooling energy requirement in an office building increases due to the increased internal heat gains, the effort to minimize the energy consumption through efficient operation of existing HVAC systems will be beneficial. In this study, one of the energy conserving efforts in an office building, operational strategies of Economizer Cycle Control have been investigated through DOE-2.1E computer simulation. The findings can be summarized : 1) Economizer Cycle Control saves energy throughout the year, 2) Econo-Limit-T must be applied seasonally based on the outside and return air conditions, 3) use of Enthalpy control is more energy efficient than that of Temperature control.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.17 no.2
• /
• pp.45-51
• /
• 2009

Three-dimensional numerical analyses of mechanical ventilation system in vent shaft of subway in operation are carried out in relation with the different air flow passage of vent shaft and two ventilation operation modes of push/pull, The ventilation characteristics of vent shaft with regard to the shape change are evaluated. And the air flow rate through the vent shaft by ventilation system is measured within subway in operation to assess the accuracy and applicability of the numerical analysis method. The decrease of air flow rate due to vent-shaft change are between 0.7 to 2.2% in the cases examined.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.2
• /
• pp.533-539
• /
• 2018

In this paper, the transformer type superconducting fault current limiter (SFCL) with additionally coupled circuit was suggested and its peak fault current limiting characteristics due to the fault condition to affect the fault current were analyzed through the fault current limiting tests. The suggested transformer type SFCL is basically identical to the previous transformer type SFCL except for the additional coupled circuit. The additional coupled circuit, which consists of the magnetically coupled winding to the primary and the secondary windings together with another superconducting element and is connected in parallel with the secondary winding of the transformer type SFCL, is contributed to the peak fault current limiting operation for the larger transient fault current directly after the fault occurrence. To confirm the fault current limiting operation of the suggested SFCL, the fault current limiting tests of the suggested SFCL were performed and its effective peak fault current limiting characteristics were analyzed through the analysis on the electrical equivalent circuit.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2342-2344
• /
• 2000

Many years ago, most of thermal power plants built in this country were of subcritical pressure, of medium or small size, of constant pressure operation, of drum type steam generator. But, nowadays, almost all of them were of high efficiency, of supercritical pressure, of great capacity(about 500MW), of sliding pressure operation, of once through type steam generator. Presently built once through boiler introduces turbine bypass systems to variable pressure operation which eliminates unexpected materials in boiler tube during startup, minimizes fuel loss by short startup period, eventually improves total efficiency and power system stability