• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.3C
• /
• pp.157-162
• /
• 2011

For blind equalization of communication channels, concurrent equalization is useful to improve convergence characteristics. However, the concurrent equalization will result in limited performance enhancement by continuing concurrent adaptation with two algorithms after the equalizer converges to steady-state. In this paper, to improve the convergence characteristics and steady-state performance of the concurrent equalization, proposed is a new concurrent equalization technique with variable step-size parameter and weight-based tap coefficients update. The proposed concurrent vsCMA+DD equalization calculates weight factors using error signals of the variable step-size CMA (vsCMA) and DD (decision-directed) algorithm, and then updates the two equalizers based on the weights respectively. The proposed method, first, improves the error performance of the CMA by the vsCMA, and enhances the steady-state performance as well as the convergence speed further by the weight-based tap coefficients update. The performance improvement by the proposed scheme is verified through simulations.

• Journal of the Society of Disaster Information
• /
• v.9 no.4
• /
• pp.521-531
• /
• 2013

Temporary residence in disaster scenarios emergency response system designed for utilizing emergency incident types identified through the rapid emergency response procedures and proper application of the resulting accident is very important in order to minimize the damage. In this study, emergency disaster expected to analyze the potential for accidents, the possible accident scenarios emergency disaster preparedness These were derived on the basis of temporary residence in the emergency scenario, the scenario for the emergency response and recovery measures were derived. In addition, each event of an emergency response scenario to be taken during the emergency response requirements for emergency response to a step-by-step behavior was defined by the subject. In addition, subject-specific, step-by-step emergency disaster scenarios emergency response is quick and can be done in a comprehensive foundation was laid.

• Quality Improvement in Health Care
• /
• v.21 no.1
• /
• pp.12-31
• /
• 2015

Objectives : The purpose of this study was to develop the qualification system for training of Quality improvement professionals who work for improving patients' safety and healthcare quality. Methods : Based on the various laws and regulations, and the operational status of other professionals' qualification systems, a basic plan of professional qualification system of QI was drawn. And through meetings with QI experts, the final scheme of the concrete qualification system was developed. Results : For management of professionals's certification or qualification, fairness and reliability are important. To do this, setting the official standard, providing a standardized training program and having appropriate qualification test are required. In order to operate the qualification system strategically, 1) the introduction step, 2) dissemination and expansion step, and 3) fusing step should be considered. As a governing body for QI specialists' qualification, 'QI professionals' qualification Center (tentative)' must have the committee to assure fairness, professionalism, and reliability. In addition, 'QI Experts Certification Department (tentative)" to develop standards for the qualification tests and conduct the tests program,' QI experts Education Department (tentative name)" must be able to operate and maintain the QI training for professional qualifications. QI professional qualification exam must be taken by everyone regardless of age, gender, race, occupation, education, and work experience. The examination should include management, leadership, strategic planning and design, quality management, health care information, patient safety culture. Practical training courses can have three step programs; beginning, intermediate and special level. Conclusion : The QI qualification system need strategic approaches for the experts working for healthcare quality improvement and patient safety. It should include the program of standardized contents and test, and operating protocol of the qualificaton system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.9
• /
• pp.795-801
• /
• 2014

STEP Cube Lab. classified as a pico-satellite has been being developed by SSTL(Space Technology Synthesis Laboratory) in Chosun University. Its main mission objective is to perform the on-orbit verification of core space technologies, which will be the potential candidates for future space missions. In this paper, to guarantee successful mission operation of the cube satellite under extremely severe space thermal environment condition, the system level thermal design and analysis has been performed. The effectiveness of the design has been verified through on-orbit thermal analysis of cube satellite.

• Korean Journal of Environmental Biology
• /
• v.38 no.3
• /
• pp.424-432
• /
• 2020

The present study aimed to analyze the metaproteome of the microbial community comprising harmful algal bloom (HAB) in the Daechung reservoir, Korea. HAB samples located at GPS coordinates of 36°29'N latitude and 127°28'E longitude were harvested in October 2013. Microscopic observation of the HAB samples revealed red signals that were presumably caused by the autofluorescence of chlorophyll and phycocyanin in viable cyanobacteria. Metaproteomic analysis was performed by a gelbased shotgun proteomic method. Protein identification was conducted through a two-step analysis including a forward search strategy (FSS) (random search with the National Center for Biotechnology Information (NCBI), Cyanobase, and Phytozome), and a subsequent reverse search strategy (RSS) (additional Cyanobase search with a decoy database). The total number of proteins identified by the two-step analysis (FSS and RSS) was 1.8-fold higher than that by one-step analysis (FSS only). A total of 194 proteins were assigned to 12 cyanobacterial species (99 mol%) and one green algae species (1 mol%). Among the species identified, the toxic microcystin-producing Microcystis aeruginosa NIES-843 (62.3%) species was the most dominant. The largest functional category was proteins belonging to the energy category (39%), followed by metabolism (15%), and translation (12%). This study will be a good reference for monitoring ecological variations at the meta-protein level of aquatic microalgae for understanding HAB.

• Journal of Korean Home Economics Education Association
• /
• v.3 no.1
• /
• pp.131-146
• /
• 1991

The purpose of this study is to acquire basic materials to help the students Others of families in their homes through understanding them. This study was based on the questions asked to 100 students without parents in their homes and 100 students in standard homes. Percentage, T-test, counseling sample were used for statistical report. The following are the analysed results of this study. 1. Among the ten events, except for family life and economic problems, there were no distinguished contrasts between the students without parents in their homes and the students in standard homes. 2. The factors influencing stress are mainly plan for future, social environment, school life and learning and students without parents are especially affected by economic problem. 3. Comparing students without parents with one another in stress, the students without parents have economic problem and deficiency of affeetion, the students without father economic problem and their mothers health, the students without mother the difficulty of house affairs and emotional uneasiness of family. The students with step-mother have much misunderstasnding because of the lack of conversation among their family. The students with step-father hardly kconverse with their father and feel uneasy in family life. Based on all can be gailed these results, the following conclusion. 1) The students Other Types of families are stressed much more than the students in standard homes in family life and economic problems. 2) All Students are Stressed by bad environment, the plan of future, scholl and learning, 3) Comparing the Stubents without parents with one another, the students without parents have economics probem and deficiency of affeetion, the students without father economic problem and their mothers health, the students without mother house affairs and emotional uneasiness off family. The students of step-father and step-mother have the misuder standing by the lark of comversation, the deficiency of affection and the uneasiness off family life.

• Atmosphere
• /
• v.30 no.2
• /
• pp.169-181
• /
• 2020

We conducted a study on the impact of observation station density; this was done in order to enable the accurate estimation of spatial meteorological variables. The purpose of this study is to help operate an efficient observation network by examining distributions of temperature, relative humidity, and wind speed in a test area of a three-dimensional meteorological observation project in the Yeongdong region in 2019. For our analysis, we grouped the observation stations as follows: 41 stations (for Step 4), 34 stations (for Step 3), 17 stations (for Step 2), and 10 stations (for Step 1). Grid values were interpolated using the kriging method. We compared the spatial accuracy of the estimated meteorological grid by using station density. The effect of increased observation network density varied and was dependent on meteorological variables and weather conditions. The temperature is sufficient for the current weather observation network (featuring an average distance about 9.30 km between stations), and the relative humidity is sufficient when the average distance between stations is about 5.04 km. However, it is recommended that all observation networks, with an average distance of approximately 4.59 km between stations, be utilized for monitoring wind speed. In addition, this also enables the operation of an effective observation network through the classification of outliers.

• Journal of Digital Convergence
• /
• v.15 no.1
• /
• pp.181-189
• /
• 2017

The purpose of this research is to set a standard for deciding competitive marketing prices of new supplying apartment houses and to analyze decision factors in sale price of supplying apartment houses with Analytic Hierarchy Process; the resulted model does not use the method that joins the land cost and the cost of construction together, but the method that compares the sales prices of surrounding apartments. This research tries to set a standard for decision of the prices of newly supplying apartment houses by classifying the determinants into the $1^{st}$ step(4 factors), the $2^{nd}$ step(9 factors), and the $3^{rd}$ step(25 factors). According to the process, the relative importance of decision factors in the sale prices is determined and this should be used as the index of sale prices for newly supplying apartment houses when the houses are provided. In addition, through the $2^{nd}$ step including 9 factors, the comparative model for sale prices is defined and the model is presented to be applied in the real business. Subsequent study additionally considering the factors apart from marketing which tries to find a generalized standard needs to be conducted.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.11
• /
• pp.1568-1574
• /
• 2017

This paper studied cogging torque reduction effect for sloping notch applied two notches on stator teeth. We have confirmed accuracy of FEM(Finite Element Method) through comparison previous model using asymmetric notch for experiment and 3D FEM results, and then cogging torque comparison of previous model and sloping notch model. Also the sloping notch model has been modified to step-sloping notch model to consider manufactur. The modification method of sloping notch changed the degree of slope of notch (a)(Notch(a) sloping Deg) and the degree of Slope of notch (b)(Notch(b) Sloping Deg). When Cogging torque is case of minimum, Notch (a) Sloping Deg is $-12[^{\circ}]$ and Notch(b) Sloping Deg $12[^{\circ}]$. In this case, cogging torque was about 23.9[mNm]. Cogging torque of previous model is about 40.8[mNm], so sloping notch model is less than previous model by 41.42[%]. Also, if sloping notch model is changed to step-sloping notch model, cogging torque of step-sloping notch model is about 24.82[mNm], Therefore the difference between the two cogging torque is about 3.85[%], so step-sloping notch model can be applied when considering manufacture.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.153-153
• /
• 2016

Aluminum alloys have poor corrosion resistance compared to the pure aluminum due to the additive elements. Thus, anodizing technology artificially generating thick oxide films are widely applied nowadays in order to improve corrosion resistance. Anodizing is one of the surface modification techniques, which is commercially applicable to a large surface at a low price. However, most studies up to now have focused on its commercialization with hardly any research on the assessment and improvement of the physical characteristics of the anodized films. Therefore, this study aims to select the optimum temperature of sulfuric electrolyte to perform excellent corrosion resistance in the harsh marine environment through electrochemical experiment in the sea water upon generating porous films by variating the temperatures of sulfuric electrolyte. To fabricate uniform porous film of 5083 aluminum alloy, we conducted electro-polishing under the 25 V at $5^{\circ}C$ condition for three minutes using mixed solution of ethanol (95 %) and perchloric (70 %) acid with volume ratio of 4:1. Afterward, the first step surface modification was performed using sulfuric acid as an electrolyte where the electrolyte concentration was maintained at 10 vol.% by using a jacketed beaker. For anode, 5083 aluminum alloy with thickness of 5 mm and size of $2cm{\times}2cm$ was used, while platinum electrode was used for cathode. The distance between the two was maintained at 3 cm. Afterward, the irregular oxide film that was created in the first step surface modification was removed. For the second step surface modification process (identical to the step 1), etching was performed using mixture of chromic acid (1.8 wt.%) and phosphoric acid (6 wt.%) at $60^{\circ}C$ temperature for 30 minutes. Anodic polarization test was performed at scan rate of 2 mV/s up to +3.0 V vs open circuit potential in natural seawater. Surface morphology was compared using 3D analysis microscope to observe the damage behavior. As a result, the case of surface modification presented a significantly lower corrosion current density than that without modification, indicating excellent corrosion resistance.