• Korean Journal of Digital Imaging in Medicine
• /
• v.10 no.1
• /
• pp.35-40
• /
• 2008

I.objective The composition method with acquiring 2${\sim}$5 image not only lack perfection in compensating the geometrical distortion but could also cause inaccurate connection problem of compensating the geometrical distortion but could also cause inaccurate connection problem of continuing bone structure due to the enlargement ratio difference of ruller and bone, density difference in image composition process. This paper studies those mentioned problems through the experiments. II. Object and method Experiment 1 After attaching 3 step wedge(Pb) on detector and 2 ruller on upper, lower part of the step wedge, we have exposed them to create density difference between 1st image and 2nd image, then examined if there were any errors. Experiment 2 1st 100cm ruller was attached on the center of detector, and by escalating the distance between 2nd 100cm ruller and detector 5cm, 10cm, 15cm respectively, we investigated if there any errors caused by enlargement ratio. Experiment 3 The ruller was placed on detector, a joint photographing was performed through spot photographing after fully operating the electric field photographing to include hip joint ${\sim}$ ankle joint part and we have compared the values from two methods. III. Result : A horizontal axis error was caused when photopraphing is not poerated in equal density since the image shifted horizontally in accordance with the difference of Pb step wedge 1 due to the density difference, as the result of Epperiment 1.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.5
• /
• pp.33-39
• /
• 2021

In this study, we tried to find the correlation of the parameters and dual resonance of U-slot microstrip patch antenna with L-shaped Inset-feed structure and design broadband antenna using them. In the first step, we classified cases where dual resonance occurs through changes in antenna parameters that affect antenna performance. In the second step, we correlated each antenna parameter to the location and intensity of the resonance point, and 3 dB bandwidth. Next, antenna simulation confirmed the process of designing to have wide bandwidth using the correlation in the second step previously presented in the U-slot antenna case with narrow bandwidth. Finally, we fabricated a designed antenna and demonstrated the validity of antenna bandwidth broadening through the correlation analysis.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.1
• /
• pp.219-225
• /
• 2019

Computing low temperature performance of asphalt mixture is one of the important tasks especially for cold regions. It is well known that experimental creep testing work is needed for computation of thermal stress and critical cracking temperature of given asphalt mixture. Thermal stress is conventionally computed through two steps of computation. First, the relaxation modulus is generated thorough the inter-conversion of the experimental creep stiffness data through the application of Hopkins and Hamming's algorithm. Secondly, thermal stress is numerically estimated solving the convolution integral. In this paper, one-step thermal stress computation methodology based on the Laplace transformation is introduced. After the extensive experimental works and comparisons of two different computation approaches, it is found that Laplace transformation application provides reliable computation results compared to the conventional approach: using two step computation with Hopkins and Hamming's algorithm.

• Korean Journal of Materials Research
• /
• v.29 no.11
• /
• pp.697-702
• /
• 2019

In this study, using a wet chemical process, we evaluate the effectiveness of different solution concentrations in removing layers from a solar cell, which is necessary for recovery of high-purity silicon. A 4-step wet etching process is applied to a 6-inch back surface field(BSF) solar cell. The metal electrode is removed in the first and second steps of the process, and the anti-reflection coating(ARC) is removed in the third step. In the fourth step, high purity silicon is recovered by simultaneously removing the emitter and the BSF layer from the solar cell. It is confirmed by inductively coupled plasma mass spectroscopy(ICP-MS) and secondary ion mass spectroscopy(SIMS) analyses that the effectiveness of layer removal increases with increasing chemical concentrations. The purity of silicon recovered through the process, using the optimal concentration for each process, is analyzed using inductively coupled plasma atomic emission spectroscopy(ICP-AES). In addition, the silicon wafer is recovered through optimum etching conditions for silicon recovery, and the solar cell is remanufactured using this recovered silicon wafer. The efficiency of the remanufactured solar cell is very similar to that of a commercial wafer-based solar cell, and sufficient for use in the PV industry.

• Journal of the Korean Society of Safety
• /
• v.38 no.1
• /
• pp.55-61
• /
• 2023

Although corporate punishment-related systems are being implemented in several countries, such as South Korea's Serious Accidents Punishment Act (SAPA), related research has mainly focused on legal issues. This study aimed to compare and analyze the SAPA and Singapore's Workplace Safety and Health Act (WSHA) and Code of Practice on Chief Executives' and Board of Directors' Workplace Safety and Health Duties (WSHD). In addition, it was attempted to draw implications to enhance the effectiveness of the CEO's safety and health duties. For this study, a comparative analysis was conducted in 3 steps. In step 1, similar overseas systems were investigated. In step 2, the system contents were classified into four viewpoints (DUTY, RESOURCE, Other factors, and Main contents), and comparison items were derived from each viewpoint. In step 3, the viewpoints were compared, and implications were derived. The following three implications were derived through comparative analyses. 1) In WSHD, additional explanation and calibration of measures clarify the CEO's role, and 2) It is easy to use for the CEO's duties by providing the resources directly. 3) Penalties for violating the proposed duties are entrusted to the existing higher-level laws. Considering this, providing detailed content and related information for the CEO would possibly improve the SAPA to fulfill his/her duties through announcements from related organizations in the future.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.12 no.3
• /
• pp.397-406
• /
• 1999

A new solution procedure for approximate reanalysis, using the staged hybrid methods with substructuring, is proposed in this study. Displacements are calculated with two step mixed procedures. First step is to introduce the conservative approximation, which is a hybrid form of the linear and reciprocal approximation, as local approximation. In the next step, it is combined with the global approximation by reduced basis approach. Stresses are evaluated from the displacements by matrix transformation. The quality of reanalyzed quantities can be greatly improved through these staged hybrid approximations, specially for large changes in the design. Overall procedures are based on substructuring scheme. Several numerical examples illustrate the validity and effectiveness of the proposed methods.

• The Research Journal of the Costume Culture
• /
• v.28 no.4
• /
• pp.508-526
• /
• 2020

This study has established a fashion illustration education plan using the contour drawing that fosters observational ability and enables creative drawing. This study developed two illustration curriculum proposals consisting of 15 weeks, combining literature and case studies. The researchers organized a step-by-step teaching plan that utilizes contour drawing according to the three stages of fashion illustration classes: foundation courses, general courses, and intensive courses. When the contour drawing is used at the beginning stage of the foundation courses of fashion illustration, it can be used as a technique to reduce the fear of students about practical skills, induce interest in illustration, and cultivate observation ability about objects. In general process, it is combined with various tools and coloring materials to strengthen expression power, and it is possible to produce detailed expressions and illustrations about human body and clothing. In intensive courses, it is expanded to the production of creative works with new aesthetics through digital techniques and mixed materials. As such, the contour drawing is expanded in various ways according to the learning contents and goals of each step, and is flexibly adjusted according to the learning content. Contour drawing has the effect of acquiring observation and expression ability, and it is analyzed as a technique that enables the production of creative illustration of students.

• Smart Structures and Systems
• /
• v.15 no.2
• /
• pp.395-408
• /
• 2015

This study aims to propose a Bayesian approach to consider changes in temperature and vehicle weight as environmental and operational factors for vibration-based long-term bridge health monitoring. The Bayesian approach consists of three steps: step 1 is to identify damage-sensitive features from coefficients of the auto-regressive model utilizing bridge accelerations; step 2 is to perform a regression analysis of the damage-sensitive features to consider environmental and operational changes by means of the Bayesian regression; and step 3 is to make a decision on the bridge health condition based on residuals, differences between the observed and predicted damage-sensitive features, utilizing 95% confidence interval and the Bayesian hypothesis testing. Feasibility of the proposed approach is examined utilizing monitoring data on an in-service bridge recorded over a one-year period. Observations through the study demonstrated that the Bayesian regression considering environmental and operational changes led to more accurate results than that without considering environmental and operational changes. The Bayesian hypothesis testing utilizing data from the healthy bridge, the damage probability of the bridge was judged as no damage.

• Smart Media Journal
• /
• v.4 no.2
• /
• pp.68-76
• /
• 2015

Recently, research on indoor locating techniques using smart device sensors has been conducted actively, Owing to the exponential increase in the use of various smart devices. However, in order to develop indoor location techniques, there are limitations due to the requirement that the tracking system has to function without GPS. In this paper, we propose an accurate indoor locating system that does not require additional infrastructure. The proposed scheme is developed based on the idea that the advantages and disadvantages of "Wi-Fi Fingerprinting" and "Step Detection" techniques are complementary. In the proposed scheme, we track users with "Step Detection," and correct errors with "Wi-Fi Fingerprinting." In this paper, we demonstrate the effectiveness and feasibility of our proposed scheme through experiments.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.1
• /
• pp.11-18
• /
• 2017

In order to maintain customer voltages within the allowable limit($220{\pm}13V$) as much as possible, tap operation strategy of SVR(Step Voltage Regulator) which is located in primary feeder, is widely used for voltage control in the utilities. However, SVR in nature has operation characteristic of the delay time ranging from 30 to 150 sec, and then the compensation of BESS (Battery Energy Storage System) during the delay time is being required because the customer voltages in distribution system may violate the allowable limit during the delay time of SVR. Furthermore, interconnection of PV(Photovoltaic) system could make a difficultly to keep customer voltage within the allowable limit. Therefore, this paper presents an optimal coordination operation algorithm between BESS and SVR based on a conventional LDC (Line Drop Compensation) method which is decided by stochastic approach. Through the modeling of SVR and BESS using the PSCAD/EMTDC, it is confirmed that customer voltages in distribution system can be maintained within the allowable limit.