• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.4
• /
• pp.43-49
• /
• 2013

In this paper, it is designed inverted triangle structural planar monopole antenna with edge and rectangle slot for UWB(Ultra Wide Band) communication (3.1~10.6 GHz) and researched in about 5.8 GHz notch structure to prevent interference between UWB systems and existing wireless systems for using Wi-Fi service. The antenna have broadband property structurally through inverted triangle structural planar monopole which have edge. and rectangle form addition planned notch slot of 1 mm and height 0.1 mm. Monopole and ground of proposed antenna exist on coplanar plane, and excite as CPW. It used FR4 epoxy dielectric substrate of ${\varepsilon}r$=4.4, and the size is $20{\times}20{\times}1.6$ mm dimension. The measured results that are obtained return loss under -10 dB through 3.1~10.6 GHz(7.5 GHz) without Wi-Fi bandwidth and maximum gain of 8.44 dBi at E-plane. Radiation pattern is about the same that of dipole antenna at all frequency. And using notch slot and it will be able to confirm the quality which becomes notch from 5.8 GHz which are a radio LAN frequency range.

• Solar Energy
• /
• v.7 no.2
• /
• pp.22-29
• /
• 1987

This paper dealed with thickness variation of bottom heat sotrage zone due to salinity and flow rate of extration hot brine in small test solar pond (0.5m wide, 0.5m high, 1.0m long). Testing apparatus and situation were follows: 7.1 cm of height of suction diffuser and 1.8cm of height of discharge diffuser above the test pond respectively, 0.3cm of slot size of suction diffuser, 1.0cm of slot size of discharge diffuser, 47cm of length of the slot; heating of hot water ($75^{\circ}C$) through separated hot water tank, discharge of the brine into storage zone through discharge diffuser, the extration of the brine through suction diffuser, circulation of the extracted brine through a heat exchanger (cooler). Following results were obtained through the experiments. 1. In small test solar pond, the typical three zone which showed up in real solar pond were established. 2. Richardson Number was used more effectively to confirm hydrodynamic stability of the stratified flow. 3. The thickness of non convective layer had a great effect on the heat storage of the bottom convective layer, then the temperature of bottom convective layer had a relation to that of upper convective layer. 4. Optimum operating condition in the test pond was on 10%-15% of salt concentration and $0.05m^3/hr$ of flow rate of extraction hot brine. 5. Following thickness of 3 zones were available to obtain under optimum operation condition: o bottom storage zone: $30%{\pm}10%$ of total pond depth o non-convective zone: $40%{\pm}10%$ of total pond depth o Upper surface zone: $20%{\pm}10%$ of total pond depth.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.5
• /
• pp.33-39
• /
• 2021

In this study, we tried to find the correlation of the parameters and dual resonance of U-slot microstrip patch antenna with L-shaped Inset-feed structure and design broadband antenna using them. In the first step, we classified cases where dual resonance occurs through changes in antenna parameters that affect antenna performance. In the second step, we correlated each antenna parameter to the location and intensity of the resonance point, and 3 dB bandwidth. Next, antenna simulation confirmed the process of designing to have wide bandwidth using the correlation in the second step previously presented in the U-slot antenna case with narrow bandwidth. Finally, we fabricated a designed antenna and demonstrated the validity of antenna bandwidth broadening through the correlation analysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.4
• /
• pp.351-361
• /
• 2014

Compared to a terrestrial communication, the high BER(Bit Error Ratio) and low channel bandwidth are the major factor of throughput degradation due to characteristics of underwater channel. Therefore, a MAC protocol must be designed to solve this problem in UWASNs(Underwater Acoustic Sensor Networks). MAC protocols for UWASNs can be classified into two major types according to the contention scheme(Contention-free scheme and Contention-based scheme). In large scale of sensor networks, a Contention-based scheme is commonly used due to time-synchronize problem of Contention-free scheme. In the contention-based scheme, Each node contends with neighbor nodes to access network channel by using Back-off algorithm. But a Slot-Time of Back-off algorithm has long delay times which are cause of decrease network throughput. In this paper, we propose a new scheme to solve this problem. The proposed scheme uses variable Slot-Time instead of fixed Slot-Time. Each node measures propagation delay from neighbors which are used by Slot-time. Therefore, Slot-Times of each node are optimized by considering node deployment. Consequently, the wasted-time for Back-off is reduced and network throughput is improved. A new mac protocol performance in throughput and delay is assessed through NS3 and compared with existing MAC protocol(MACA-U). Finally, it was proved that the MAC protocol using the proposed scheme has better performance than existing MAC protocol as a result of comparison.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.12C
• /
• pp.1192-1199
• /
• 2003

In this paper, we investigate the effect of pulse repetition frequency (PRF) and slot interval on the throughput performance of the ultra wide band (UWB) wireless communication system in multi-path channels, and based on these observations, a data throughput control using PRF and slot interval is proposed for maximizing the effective throughput. Recently, due to many desirable features of the UWB system, it has drawn much attention especially for short-range high-speed data transmission. The UWB system has two parameters to determine its data throughput; pulse repetition frequency and slot interval. In the multi-path channel with additive white Gaussian noise, the UWB system suffers from the inter-pulse interference (IPI) and noise, which result in degradation of system performance. The UWB system can vary the two parameters to maintain and/or improve the system performance. In this paper, we demonstrate the effects of the two parameters on the data throughput of the UWB system in various multi-path indoor channels through computer simulation, and show that the variable data rate approach designed based on the observations is superior to the fixed data rate one in terms of effective throughput performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.1
• /
• pp.1-7
• /
• 2017

In this paper, a design method for a compact stepped open slot antenna for an operation in the UWB band is studied. The proposed antenna is miniaturized by inserting L-shaped slots on the ground plane of the stepped open slot antenna through the creation of a resonance in the low frequency, and a strip director is appended to the antenna in order to increase the gain in the middle and high frequency regions. The effects of varying the length of the L-shaped slots, the distance between the director and the slot antenna, and the director length on input reflection coefficient and realized gain characteristics of the proposed antenna are analyzed. The optimized antenna with the size of $30mm{\times}30mm$ is fabricated on an FR4 substrate, and the experiment results show that the antenna has a frequency band of 3.02-11.04 GHz for a VSWR < 2, which assures the operation in the UWB band.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.7
• /
• pp.30-37
• /
• 2002

In this paper, we propose a new adaptive slot assignment algorithm called In-VDSA in order to guarantee the QoS(Quality of Service) of VBR(Variable Bit Rate) traffics in wireless ATM and maximize efficiency in use of wireless channels. In the proposed algorithm, the status of terminal buffers is encoded in signed number on the GFC(Generic Flow Control) field of an ATM cell header and piggybacked. And also, the number of slots to be assigned to the next frame is adjusted effectively, which is different to methods in the conventional slot assignment algorithms. As a result, we can guarantee QoS such as CLR(Cell Loss Rate) and cell delay and achieve the higher utilization of channels. The validity of the proposed algorithm has been justified in performance by analysis through simulation results using the BONeS tool and comparison with conventional methods.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.3
• /
• pp.470-475
• /
• 2012

In Q-algorithm of EPCglobal Class-1 Gen-2 RFID system, the initial value of $Q_{fp}$, which is the slot-count parameter, is not defined in the standard. And the values of weight C, which is the parameter for incrementing or decrementing the slot-count size, are not determined. Therefore, if the number of tags is small and we let the initial $Q_{fp}$ be large, the number of empty slot will be large. On the other hand, if we let the initial $Q_{fp}$ be small in spite of many tags, almost all the slots will be collided. Also, if the reader selects an inappropriate weight, there are a lot of empty or collided slots. As a result, the performance will be declined because the frame size does not converge to the optimal point quickly during the query round. In this paper, we propose a scheme to allocate the optimal initial $Q_{fp}$ through the tag number estimation and select the weight based on the slot-count size of current query round.

• Convergence Security Journal
• /
• v.7 no.2
• /
• pp.17-25
• /
• 2007

In this paper, an algorithm that provisions proportional differentiation of packet delays is proposed with an objective for enhancing quality of service (QoS) in future packet networks. It features an adaptive scheme that adjusts the target delay every time slot to compensate the deviation from the target delay which is caused by the prediction error on the traffic to be arrived in the next time slot. It predicts the traffic to be arrived at the beginning of a time slot and measures the actual arrived traffic at the end of the time slot. The difference between them is utilized to the delay control operation for the next time slot to offset it. As it compensates the prediction error continuously, it shows superior adaptability to the bursty traffic as well as the exponential rate traffic. It is demonstrated through simulations that the algorithm meets the quantitative delay bounds and shows superiority to the traffic fluctuation in comparison with the conventional non-adaptive mechanism. The algorithm is implemented with VHDL on a Xilinx Spartan XC3S1500 FPGA and the performance is verified under the test board based on the XPC860P CPU.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.10
• /
• pp.1463-1470
• /
• 2010

E. coli has long been widely used as a host system for the manufacture of recombinant proteins intended for human therapeutic use. When considering the impurities to be eliminated during the downstream process, residual host cell DNA is a major safety concern. The presence of residual E. coli host cell DNA in the final products is typically determined using a conventional slot blot hybridization assay or total DNA Threshold assay. However, both the former and latter methods are time consuming, expensive, and relatively insensitive. This study thus attempted to develop a more sensitive real-time PCR assay for the specific detection of residual E. coli DNA. This novel method was then compared with the slot blot hybridization assay and total DNA Threshold assay in order to determine its effectiveness and overall capabilities. The novel approach involved the selection of a specific primer pair for amplification of the E. coli 16S rRNA gene in an effort to improve sensitivity, whereas the E. coli host cell DNA quantification took place through the use of SYBR Green I. The detection limit of the real-time PCR assay, under these optimized conditions, was calculated to be 0.042 pg genomic DNA, which was much higher than those of both the slot blot hybridization assay and total DNA Threshold assay, where the detection limits were 2.42 and 3.73 pg genomic DNA, respectively. Hence, the real-time PCR assay can be said to be more reproducible, more accurate, and more precise than either the slot blot hybridization assay or total DNA Threshold assay. The real-time PCR assay may thus be a promising new tool for the quantitative detection and clearance validation of residual E. coli host cell DNA during the manufacturingprocess for recombinant therapeutics.