• Journal of electromagnetic engineering and science
• /
• 제16권4호
• /
• pp.248-253
• /
• 2016

Two substrate integrated waveguide (SIW)-based antennas for the application of software-defined radar are proposed and investigated herein. It is usually well known that SIWs are easily integrated, lightweight, have low insertion loss, and low interference levels compared to conventional microstrip structures. The primary function of the proposed antennas is to transmit continuous waves for indoor motion detection, with the lowest amount of loss and an appropriate amount of gain. Moreover, the results of this study show that the size of the antenna can be reduced significantly (i.e., by about 40%) by applying a meander line structure. The operating frequencies of the proposed antennas are both within the industrial, scientific, and medical band (i.e., 2.4-2.4835 GHz). Measured results of return loss are -16 dB and -20 dB at 2.435 GHz and 2.43 GHz, respectively, and the measured gain is 8.2 dBi and 5.5 dBi, respectively. Antenna design and verification are undertaken through commercially available full electromagnetic software.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제28회 KOSCO SYMPOSIUM 논문집
• /
• pp.37-41
• /
• 2004

Quenching phenomena is one of major concern in development of millimeter or sub-millimeter scale micro combustor for the size of the combustor is near extinction condition. In this work we focused on the effect of combustor wall condition that was parameterized by Perovskite LSC($La_{0.8}$$Sr_{0.2}$$CoO_3$) redox catalyst. The experiment was done by variable gap-width 2D wall equipment. The flame was produced by premixed methane-air jet issuing from millimeter-scale slot burner and it propagated through the narrow gap of the walls. By comparison of flame behaviour near catalyst-coated wall and simple glass wall, we investigated the effect of possible surface reaction on quenching phenomena. The flame between two plates was observed where the gap of the plates was reduced stepwise from 20mm to a distance of quenching occurrence. The two flames with and without surface modification were almost same by observation. But the gap for the occurrence of quenching was increased between catalyst-coated wall. So we concluded that surface reaction close to combustor wall has a negative effect on micro combustion.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제27회 추계학술대회논문집
• /
• pp.327-330
• /
• 2006

공동부 위에 설치된 슬롯판을 이용한 경사충격파와 난류 경계층의 간섭유동의 피동제어에 관한 수치적 연구가 수행되었다. 얻어진 수치결과는 피토압력/벽압력 분포와 쉴리렌 유동가시화 등 동일한 경계조건에서 수행된 실험결과와 비교되었으며, 두 결과가 서로 잘 일치하고 있음이 확인되었다. 또한 슬롯의 위치와 개수, 슬롯의 각도 등 슬롯판의 다양한 형상변화가 간섭유동에 미치는 영향이 추가로 관찰되었다. 이러한 슬롯의 형상변화가 간섭유동에 미치는 영향을 정량적으로 파악하기 위하여, 간섭유동 후방의 피토압력 및 전압 변화, 경계층 특성변화, 그리고 슬롯판을 통하여 공동부 내부로 유출입하는 질량유량의 변화 등이 관찰되었다.

• 대한임베디드공학회논문지
• /
• 제2권1호
• /
• pp.53-59
• /
• 2007

Wimedia UWB(Ultra-Wideband) platform provides data rates up to 480Mbps in WPAN (Wireless Personal Area Network). Wimedia conformant devices access to the channels through superframe concept for communications. As the channel resource is limited, the optimal channel time required for each device needs to be estimated to share the resource efficiently among the devices. In this paper, we propose a scheme to estimate the required channel time in a super frame to satisfy the QoS of the application on a device. The channel time is estimated from the service rate which is computed from the TSPEC of the application. In the process of the estimation, we take the frame overhead for data transmission as well as the overhead due to the acknowledgement scheme, preamble, and MDSU size into consideration. We also analyze and compare the throughputs for different acknowledgement scheme, preamble, and MDSU size situations. The estimated channel time required for a given service rate is allocated in the unit of MAS(Medium Access Slot).

• International Journal of Internet, Broadcasting and Communication
• /
• 제12권2호
• /
• pp.30-36
• /
• 2020

We demonstrated a successful fabrication of 4" Gallium Nitride (GaN)/Diamond High Electron Mobility Transistors (HEMTs) incorporated with Inner Slot Via Hole process. We made in manufacturing technology of 4" GaN/Diamond HEMT wafers in a compound semiconductor foundry since reported [1]. Wafer thickness uniformity and wafer flatness of starting GaN/Diamond wafers have improved greatly, which contributed to improved processing yield. By optimizing Laser drilling techniques, we successfully demonstrated a through-substrate-via process, which is last hurdle in GaN/Diamond manufacturing technology. To fully exploit Diamond's superior thermal property for GaN HEMT devices, we include Aluminum Nitride (AlN) barrier in epitaxial layer structure, in addition to conventional Aluminum Gallium Nitride (AlGaN) barrier layer. The current collapse revealed very stable up to Vds = 90 V. The trapping behaviors were measured Emission Microscope (EMMI). The traps are located in interface between Silicon Nitride (SiN) passivation layer and GaN cap layer.

• 한국통신학회논문지
• /
• 제24권6A호
• /
• pp.803-819
• /
• 1999

본 논문은 무선 ATM 서비스를 위한 CDMA WATM 시스템을 제시하며, 매체 접속 방식으로 전송 스케줄링과 슬롯 및 무선 링크 할당 알고리즘을 가진 중앙 제어 예약 접속 방식 (CRMA/TSDA)을 제안한다. 또한, 본 논문에서는 CDMA WATM 시스템을 위한 무선 접속 및 링크 제어 방식으로 지역정보 슬롯 및 링크 할당 알고리즘과 광역정보 슬롯 및 링크 할당 알고리즘을 제안하고, 모의 실험을 통하여 양방향 링크에서의 시스템 용량과 성능을 분석하였다. 제시된 접속 방식 및 제어 방식은 기존의 CDMA 랜덤 접속 방식에 비해 만족할 만한 성능을 보이며, ATM 서비스의 요구 품질을 만족시키며 수용할 수 있다. 특히, 지역 정보 제어 방식은 준최적의 광역 정보 방식에 견줄만한 성능을 갖는다.

• 한국통신학회논문지
• /
• 제32권9B호
• /
• pp.589-597
• /
• 2007

In this paper, a WDM metro ring consisting of access nodes with $FT-FR^n$ (Fixed Transmitter - n Fixed Receivers) is considered. A trade-off exists between node throughput and transmission fairness because the access nodes share wavelength channels. In order to eliminate the transmission unfairness and to increase throughput, the p-persistent medium access control (MAC) protocol is proposed: each node uses an empty optical slot to transmit a packet and make it available with the extraction of a transferred packet at the source access node, called source-stripping. The local empty slot can be used to transfer a head-of-line packet in the local buffer with probability p or it is used for the next downstream nodes with 1-p. The proposed MAC protocol provides better node throughput than the non-persistent protocol and exhibits better fairness index than the 1-persistent protocol in WDM ring networks. In addition, numerical analysis shows that the proposed MAC protocol maximizes the node throughput under uniform traffic conditions. For more detailed results, we use the network simulation under Poisson and self-similar traffic. Furthermore, unpredictable traffic constructed by the combination of the former and the latter is also considered. The reasonable probability of the p-persistent protocol for a given architecture can be determined through simulation.

• 한국통신학회논문지
• /
• 제31권10B호
• /
• pp.866-871
• /
• 2006

본 논문에서는 이동 애드혹 망에서 멀티미디어 트래픽 처리를 위해 예약 방식의 매체 접근 제어(MAC) 프로토콜을 설계하고 그 성능을 평가하였다. 예약 방식의 MAC 프로토콜은 두 개의 부분 계층으로 이루어진 계층적 접근법을 기반으로 한다. MAC의 하위 부분 계층은 이동 애드혹 망에서 비동기 데이터 트래픽을 지원하기 위해 CSMA/CA를 사용하는 기본적인 접근 방법을 제공한다. 그 위에 상위 부분 계층은 실제 데이터 전송에 앞서 슬롯(slot) 예약을 수행함으로써 실시간 주기적 트래픽을 지원한다. 제안된 프로토콜은 ns-2 시뮬레이터를 사용하여 검증하였다. 시뮬레이션 수행 결과는 예약 방식의 MAC 프로토콜이 IEEE 802.11 표준과 비교하여 더 높은 처리율(throughput)과 더 낮은 지연(delay)을 제공하므로 실시간 트래픽 전송에 적합함을 보여주었다.

• 한국정보컨버전스학회:학술대회논문집
• /
• 한국정보컨버전스학회 2008년도 International conference on information convergence
• /
• pp.199-204
• /
• 2008

Sensor nodes have various energy and computational constraints because of their inexpensive nature and ad-hoc method of deployment. Considerable research has been focused at overcoming these deficiencies through faster media accessing, more energy efficient routing, localization algorithms and system design. Our research attempts to provide a method of improvement MAC performance in these issues. We show that traditional carrier-sense multiple access(CSMA) protocols like IEEE 802.11 do not handle the first constraint adequately, and do not take advantage of the second property, leading to degraded latency and throughput as the network scales in size, We present more efficient method of a medium access for real-time wireless sensor networks. Proposed MAC protocol is a randomized CSMA protocol, but unlike previous legacy protocols, does not use a time-varying contention window from which a node randomly picks a transmission slot. To reduce the latency for the delivery of event reports, it carefully decides a fixed-size contention window, non-uniform probability distribution of transmitting in each slot within the window. We show that it can offer up to several times latency reduction compared to legacy of IEEE 802.11 as the size of the sensor network scales up to 256 nodes using widely used simulator ns-2. We, finally show that proposed MAC scheme comes close to meeting bounds on the best latency achievable by a decentralized CSMA-based MAC protocol for real-time wireless sensor networks which is sensitive to latency.

• Journal of electromagnetic engineering and science
• /
• 제11권2호
• /
• pp.97-104
• /
• 2011

A planar slotted waveguide array antenna has been designed at 9.37 GHz for X-band radar applications. The antenna consists of multiple branchline waveguides with broadwall radiating shunt slots and a main waveguide to feed the branch waveguides through a series of inclined coupling slots. The antenna feed point is located at the center of the main waveguide. Element weights in the array have been calculated bysampling a continuous circular Taylor aperture distribution at the 25 dB sidelobe level in both the E and Hplanes. A commercially available electromagnetic (EM) simulation tool has been used to characterize the individual isolated slot and that data hassubsequently been used to design the planar array. The array is finally analyzed in a CST Microwave studio and the measured and simulated results have been found to be in good agreement.