• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.1
• /
• pp.251-258
• /
• 2013

We studied it about ways to detect damage of a tire about randomness ultrasonic signal which occurs repeatedly while rub a tire of driving car and a road surface. The signal randomness is decreased through the preprocess of short-time energy calculation and the average value of coherence function is used by the normalization expression of the signal randomness. The process limit that can be decide on the dominant period of a signal using the coherence threshold is analyzed and the algorithm to decide the dominant period is proposed by setting up the -3dB threshold of the maximum value on the power spectrum.

• Journal of the Ergonomics Society of Korea
• /
• v.24 no.1
• /
• pp.9-17
• /
• 2005

81.1% of traffic accidents is attributed to the drivers. In this regard, D/E model is a practical and effective method in terms of the cost and time in evaluating the road hazardousness. To examine the validity of the threshold values by the levels of demand We selected 10 subjects and collected their physiological signals while they were driving on Honam Highway (Jeonju ${\leftrighttarro}$ Hoideog section). Based on the collected data, the hazardous road condition was evaluated using the new threshold values of the effort level determined by cluster analysis. In applying the D/E model, a decision method based on the demand level was suggested, using a traffic accident prediction model. Additionally, the limit value of the effort level was determined using the drivers' physiological signal data collected at the highway. A comparison analysis of the two D/E models revealed no significant difference: The existing method and the clustering method determined 9 and 7 hazardous road zones, respectively, while actual traffic accidents were reported in 6 and 4 zones, respectively among the predicted road hazardous zones. However, the latter method suggested a more scientific and rational basis in determining the limit value of the Effort level. In conclusion, although D/E model has a great merit as a pioneering method to reflect human factors in evaluating the road hazardousness, it is believed that this method could be improved by a more dynamic method that considers the traffic conditions and the individual physiological signal of the drivers simultaneously in determining a better limit.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.4
• /
• pp.381-392
• /
• 2022

Objectives: Objective of this study is to review briefly exposure characteristics, monitoring instruments and threshold limit values for extremely low frequency-magnetic field (ELF-MF) methods. This study was undertaken through brief literature review. We performed a literature search in PubMed to identify ELF-MF studies conducted in workplaces. Initial search keywords such as 'extremely low frequency-magnetic field (ELF-MF)' and 'electromagnetic fields (EMF)' combined or singly. We limited our review to occupational rather than general nonworkplace environmental exposures. Methods: The contents we reviewed: key industry and occupations generating ELF-MF, several direct-reading instruments monitoring ELF-MF and threshold limit values (TLV) preventing health effects may be caused by the exposure to ELF-MF. Results: The industries related to the generation and supply of electricity, electrolytic installations, welding, and induction heating and more were regarded as high ELF-MF exposure industries. All jobs handling or employed performed in power cable lines, electrical wiring, and electrical equipment are found to be exposed to ELF-MF. Threshold or ceiling limit, 1,000 µT, is established to prevent acute effects of exposure to low-frequency EMFs on the nervous system: the direct stimulation of nerve and muscle tissues and the induction of retinal phosphenes. The International Agency for Research on Cancer (IARC) has classified ELF-MF as possibly carcinogenic to humans chiefly based on epidemiological studies on childhood leukemia. However, a causal relationship between magnetic fields and several types of cancer including childhood leukemia has not been established nor has any other long-term effects. Risk management using precautionary measures, has been initiated by the US and EU to prevent chronic health effects related to ELF-MF exposure in workplaces. Conclusion: This study recommends the implementation of various measures such as theestablishment of occupational exposure limit values for ELF-MF and precautionary principle to prevent potential chronic occupational health effects may be caused by ELF-MF in Korea.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.8 no.1
• /
• pp.76-87
• /
• 1998

The concentration of welding fume was measured by 221 welders themselves in chassis frame workplace of the manufactory from February, 1, 1996 to May, 31, 1997. Welding parameters were the welding current and the distance between helmet and arc. Those two optimum conditions were proposed by excess probability analysis using logistic regression, so the best position in the workplace was proposed considering two factors to control the welding fume. The results are as followings; 1) The excess proability of welding fume TLV was over 99% in above 260 Amperes of welding current and also in below 30cm of distanced between helmet and arc. 2) The equation from logistic regression analysis using SPSS/PC+5.02 had the welding current as a independent variable and the excess of welding fume TLV as a dependent variable (p<0.05). Logit(welding fume TLV) = 0.1296 ${\times}$ wlding currnet - 28.8750 3) The equation from logistic regression analysis using SPSS/PC+5.02 had the distance between helmet and arc as a independent variable and the excess of welding fume threshold limit value a, a dependent variable (p<0.05). Logit (welding fume TLV) = -0.6809 ${\times}$ distance between helmet and arc +25.1665 4) Considering both cases or 2) and 3). the result equation is following. (p<0.05). Logit (welding fume TLV) = 0.1346 ${\times}$ welding current -0.3859 ${\times}$ distance between helmet and arc -15.7382 5) The excess probability of welding fume threshold limit value was 100% in above 240 Ampere of welding current. Thus, below 220 Ampere can be suggested to reduce the 40% number of welders who have a excess welding fume threshold limit value. 6) The excess probability of welding fume TLV was 100% in below 34cm of distance between helmet and arc. Thus, over 38cm can be suggested to reduce the 33% number of welders who have a excess welding fume TLV. 7) Considering both 5) and 6) cases, first of all, the best welding current can be 200 Ampere to have a below 15% of welding fume excess probability for the welders who works in distance of 34-37cm. Secondly, to have a below 30% excess probability of welding fume TLV, the working distance must be over 38cm in 220 Ampere and 32cm in 200 Ampere. 8) To reduce the average exposure concentration of welding fume ($8.21{\pm}5.83mg/m^3$), the movable local exhaust system equipped with flexible hoods can be used.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.5 no.2
• /
• pp.193-199
• /
• 1995

This study was designed to investigate the difference of time weighted average(TWA) of noise levels and noise doses by the different operating parameter settings such as exchange rate, threshold level and criterion level for noise dosimeter in the field measurements of noise at industrial working environments. The time weighted averages of noise level and noise doses for noise working environments were determined by noise dosimeter on 80 workers employed at 20 industrial establishments of 8 industries. The results obtained were as follows: 1. The mean time weighted average(TWA) of the noise working environments by the operating parameter settings showed 93.4 dB(A) in 3 dB of exchange rate, 80 dB of threshold level and 90dB of criterion level 92.0 dB(A) in 3 dB-exchange rate, 90 dB-threshold level and 90 dB-criterion level, in 90.8 dB(A) in 5 dB of exchange rate, 80 dB of threshold level and 90 dB of criterion level, and 86.7 dB(A) in 5 dB of exchange rate, 90 dB of threshold level and 90dB of criterion level. 2. ln group of noise level less than 90 dB(A), mean TWAs of 80 dB of threshold level were significantly higher than that of 90 dB of threshold level in 3 dB and 5 dB of exchange rate. 3. The case exceeded threshold limit value of noise was 49(61.3 %) in 3dB, 80dB and 90 dB setting, 44(55.0 %) in 3 dB, 90 dB, 90 dB setting, 33(41.3 %) in 5 dB, 80dB, 90 dB setting and 26(32.5%) in 5 dB, 90 dB, 90 dB setting. Above considerations in mind, it is suggested that exchange rate and threshold level be specified in related laws and regulations in the evaluation of working environments noise.

• Journal of Welding and Joining
• /
• v.2 no.2
• /
• pp.7-12
• /
• 1984

중화학공업과 조선공업이 비약적으로 발달됨에 따라 우리나라의 용접기술은 진일보를 거듭하였다. 그러나 각종 용접에 따른 산업재해(감전, 용접 fume 및 가스에 의한 진폐, 중독, 화상 등)도 날로 증가하는 추세로 이러한 용접재해 중 용접흄(fume)으로 인한 안전위생 및 환경오염적인 측면에서 큰 문제점을 야기하고 있으나 아직 국내에서는 여기에 대한 관심 및 연구가 미비한 실정이다. 그러므로 본 고에서는 용접 fume에 대한 개괄적인 면을 소개하고, 그 중 현실로 직면하는 "현장 용접장의 흄(fume) 및 흄의 특정성분에 대한 관리허용농도의 현황과 흄 발생량에 따른 필요 환기량"을 기술하고자 한다. 기술하고자 한다.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.5
• /
• pp.322-330
• /
• 2009

In order to utilize NAND flash memory as storage media which does not allow update-in-place and limits the number of block erase count, various garbage collection policies supporting wear-leveling have been investigated. Conventional garbage collection policies require cleaning-index calculation for the entire blocks to choose a block to be garbage-collected to support wear-leveling whenever a garbage collection is required, which results in performance degradation of system. This paper proposes a garbage collection policy which supports wear-leveling using a threshold value, which is in fact a variance of erase counts and by the maximum erase count of all blocks, without calculating the cleaning-index. During garbage collection, the erase cost is minimized by using the Greedy Policy if the variance is less than the threshold value. It achieves wear-leveling by excluding the block with the largest erase count from erase target blocks if the variance is larger than threshold value. The proposed scheme shows that a standard deviation approaches to zero as the erase count of blocks approaches to its upper limit and the measured speed of garbage collection is two times faster than the conventional schemes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.2
• /
• pp.97-104
• /
• 2013

This paper introduces waiting time based periodic packet discard policy for frame based scheduler. This policy can be used with conventional packet discard policy or buffer management schemes, such as drop-tail or random early detection. Proposed discard policy discards packets, which are stayed in the buffer longer than threshold, at every period of scheduling. This decision of discard is based on waiting time of packet. In this paper, mathematical analysis is performed with situation of network congestion. Also, the simulation is performed to evaluate the performance of proposed discard policy. In the result, proposed discard policy can limit queuing delay by threshold. Also, if the packet discard is performed before scheduling and threshold is set with smaller value than frame length, it can limit the throughput of traffic.

• 대한예방의학회:학술대회논문집
• /
• 1994.02a
• /
• pp.681-691
• /
• 1994

The American Conference of Governmental Industrial Hygienists (ACGIH) has proposed a threshold limit value (TLV) for benzene of 0.1 ppm. Individuals representing the American Petroleum Institute (API)and the Chemical Manufacturers Association (CMA) have argued that 1) the risk assessment by Rinsky .et al. which ACGIH partially relied upon for its proposed TLV overestimates the risk; however, at the exposures levels of interest - (e.g., 0.1 to 1.0 ppm) for establishing a benzene TLV, the Rinsky et al. assessment provides lower estimates of leukemia risk than most others; 2) ACGIH should not use the Dow study for direct observational evidence of leukemia risk associated with low-level benzene exposure because of confounding exposure; however, it is unlikely that confounding exposures played a role in the excess of leukemia demonstrated in the study, and the Dow cohort was exposed to an average benzene concentration of about 5.5 ppm benzene for 7.11 years (31:1.5 ppm-years), while some of the individuals in the study who died from leukemia were exposed to an average of only 1.0 ppm without the opportunity for highpeak exposures; 3) the Occupational Safety and Health Administration (OSHA) established an 8-hour time-weighted average (TWA) of 1.0 ppm in 1987, and there is no new evidence that would justify reducing the TWA below that level; however, the OSHA TWA of 1.0 ppm was based on economic feasibility and the level of excess risk remaining at 1.0 ppm, i.e., 10 excess leukemia deaths per 1000 workers over an occupational lifetime (45 years) according to OSHA's preferred estimate leaves behind I risk considered significant by OSHA. In addition, chromosomal studies among workers and in animals exposed to benzene indicate that low-level exposure, i.e., 1.0 ppm, is associated with elevated Cytogenetic damage. On the basis of adverse health effects data alone, in this author's opinion, it would be poor science and poor public health policy to establish a benzene TLV greater than 0.1 ppm.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.9 no.1
• /
• pp.112-124
• /
• 1999

The purposes of this study were to provide the data for composition of ethylene glycol ethers and 2-ethoxyethyl acetate(EEA) exposure assessment of workers in various industrial operations. In this study, 80 thinners were analyzed to identify their composition and the air concentration of 2-ethoxyethyl acetate(EEA) and urinary 2-ethoxyacetic acid(EAA) were measured. In this study the subjects were the total of 183 drawn from 98 workers who were occupationally exposed to EEA and 85 workers who were not. The results were as follows: 1. There were found average 4.2 components in each thinner. 2. There were 90 components(26.9%) in ethylene glycol ethers of total of 334 detected organic solvents 3. Ethoxyethyl acetate, ethoxyethanol, buthoxyethanol, methoxy-ethanol were found in 30(37.5%), 27(33.8%), 19(23.8%), 2thinners(2.5%), respectively and their contents were average 18.5%. 4. Benzene was found 8 thinners(10.0%) of the total 80 surveyed. 5. In the electronic painting workers EEA exposure concentration was the highest, as showed 2.88ppm(0.01~15.1ppm), cases of exceeded threshold limit value(TLV=5ppm) were 7(10.6%) workers among the total of 98 exposed workers. 6. The geometric mean of urinary EEA in exposed workers was 1.61 mg/gcreatinine, and was higher than that of workers who were not exposed. In the electronic painting workers and offset printers, the geometric mean of urinary EAA was the highest showing 2.8 mg/gcreatinine. 7. The correlation coefficient between urinary concentration of EAA and air concentration of EEA was 0.90(P<0.05). The present results suggest that composition of ethylene glycol ethers in thinners must be evaluated when industrial hygiene surveys and biological monitoring are performed.