• 인터넷정보학회논문지
• /
• 제10권3호
• /
• pp.85-94
• /
• 2009

본 논문에서는 무선 센서 네트워크에서의 에너지 효율적인 전송방안을 제안하고 이에 대한 이론적 분석을 제시하고자 한다. 본 논문에서 제안하는 전송기법은 채널 상태가 상대적으로 좋을 때만 전송을 시도하는 opportunistic transmission에 기반한 이진 결정 (binary-decision) 기반 전송이다. 이진 결정 기반 전송에서는 Markov decision process (MDP)를 이용하여 성공적인 전송을 위한 최적의 채널 임계값을 도출하였다. 다양한 시뮬레이션을 통해 제안하는 전송기법의 성능을 에너지 효율성과 전송율 측면에서 분석하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.656-659
• /
• 1993

The failure phenomenon of Dual Basalt Fibers Reinforced Epoxy Composites(DFC) under tensile load was studied using acoustic emission(AE) technique. AE amplitude and AE energy were mainly associated with the internal microscopic failure mechanism of DFC specimen, such as fiber fracture, matrix cracking, and fiber/matrix debonding. Fiber failures in the DFC specimens were distinguishable by showing the highest AE energy amplitude. They were dependant on the fiber diameters. Matrix cracking was determined from the relatively lower AE amplitude and AE energy, whereas fiber/matrix debonding could not be successfully isolated. AE method, however, can be applicable to the fragmentation method for interfacial strength(IFSS) in DFC specimens with adjusting the threshold to isolate fiber breaks from matrix crack and debonding.

• 한국대기환경학회지
• /
• 제17권2호
• /
• pp.223-231
• /
• 2001

In order to provide some insights into the influence of electric field, gas composition, and gas temperature on electron energy distribution and electron transport characteristics, the Boltzmann equation was solved by using cross section data for electron collisions, Critical electric fields for the corona development in dry air and flue gas are 150 and 80 Td, respectively. It was seen that the decrease of critical electric field in flue gas is mainly caused by the $H_2O$ addition through the comparison of ionization and attachment coefficients of gas components. Increase of $O_2$, $H_2O$, and $CO_2$ contents in gas affected discharge characteristics according to their reciprocal characteristics between lowering the ionization threshold and increasing the electro-negativity. As electric field increases, electrons with higher energies in the electron energy distribution also increase. The mean and characteristic electron energies also linearly increase with electric field. The variation of flue gas temperature did rarely affect on the electron energy distribution function and electron transport characteristics, because the gas temperature is several hundreds or thousands times lower than the electron temperature.

• Nuclear Engineering and Technology
• /
• 제52권3호
• /
• pp.614-620
• /
• 2020

In a previous study, delayed hydride cracking (DHC) assessment of pressurized water reactor (PWR) spent fuel during dry storage using the threshold stress intensity factor (K_IH) was performed. However, there were a few limitations in the analysis of the cladding properties, such as oxide thickness and mechanical properties. In this study, those models were modified to include test data for irradiated materials, and the cladding creep model was introduced to improve the reliability of the DHC assessment. In this study, DHC susceptibility of PWR spent fuel during dry storage depending on the axial elevation was evaluated with the improved assessment methodology. In addition, the sensitivity of affecting parameters such as fuel burnup, hydride thickness, and crack aspect ratio are presented.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.96-99
• /
• 2008

The MRE (Monitoring Reconfiguration Electronics) board included inside the SCU (Spacecraft Computer Unit) in the COMS (Communication, Ocean and Meteorological Satellite) spacecraft is used to monitor the battery voltage and to detect a battery under voltage (low battery capacity) or a battery overvoltage (overcharge). In case of alarm detection, a reconfiguration is initiated by the MRE board. The MRE configures the overall spacecraft in the survival mode to protect the Li-Ion (lithium ion) battery from overcharge and over discharge. For the EPS (Electrical Power Subsystem) point of view, the survival mode can be trigged from hardware wired thresholds. The aim of this paper to provide and to justify the low and high threshold levels which are associated to the MRE battery voltage monitoring. The MRE trig guarantees minimum battery energy to available for the required 48 hours autonomy duration of the spacecraft after MRE trig in the survival mode.

• 한국전기전자재료학회논문지
• /
• 제18권11호
• /
• pp.1028-1032
• /
• 2005

Liquid crystal (LC) alignment using a photoalignment method by irradiation of polarized ultraviolet (UV) on an alignment layer has been investigated. Photoalignment method exhibits weaker anchoring energy than rubbing method so that we have studied electro-optic characteristics of fringe-field switching (FFS) mode with alignment layers using the photo and rubbing alignment methods. The cell using photo alignment layer shows lower threshold and operation voltage than those using rubbed alignment layer. Also, the former method shows higher transmittance than that of the latter.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2004년도 가을 학술발표논문집 Vol.31 No.2 (3)
• /
• pp.223-225
• /
• 2004

Ad-Hoc 네트워크에서 기존의 On-Demand 방식의 라우팅 프로토콜은 네트워크에서 현재 사용 중인 경로가 혼잡하어라도 네트워크 토폴로지가 변하기 이전에는 새로운 경로를 찾지 못하므로 노드의 이동성이 낮은 환경에서는 트래픽이 특정노드로 집중되는 문제가 발생한다 또한 노드들의 이동성이 낮아 네트워크가 안정된 상태인 경우 특정 노드의 트래픽이 고려되지 않은 상태에서 최단 경로만을 선택하여 데이터를 전송하기 때문에 특정노드에 트래픽이 집중되어 전송지연 및 과도한 에너지 소비를 발생시킨다는 문제점을 갖는다. 이런 특정 노드의 과도한 에너지 소비를 차단하여 전체 네트워크의 수명을 연장시키기 위한 효과적인 방법을 찾기 위한 노력이 진행되고 있다. 본 논문에서는 이러한 문제를 해결하기 위해 기존의 DSR에 에너지 소비율을 기반으로 경로설정 및 대체경로 설정기능을 추가한 ECLB(Energy Consumption based Load Balancing Method)를 제안한다. ECLB는 현재의 단위시간당 처리되는 패킷수와 과거의 평균 패킷처리율을 바탕으로 에너지 임계치(energy threshold)를 설정하고 이를 바탕으로 최적의 경로를 설정한다. 또한 계속적으로 동일 전송 경로를 사용함으로 인한 특정노드에 대한 에너지 소모의 심화와 전송지연을 최소화하기 위해 과중한 트래픽 상태를 분산시킬 수 있는 대체경로를 이용하여 데이터 집중에 따른 손실을 최소화시킨다.

• 한국음향학회지
• /
• 제33권2호
• /
• pp.139-145
• /
• 2014

본 논문에서는 WPD (Wavelet Packet Decomposition) 계수에 Teager 에너지를 적용한 특징 계수를 임계값 알고리듬에 적용하여 잡음에 강인한 VAD 알고리듬을 제안하였다. 임계값은 비음성 구간의 평균과 표준편차를 추산하여 설정하였다. TIMIT 음성과 NOISEX 잡음 데이터베이스를 사용한 실험 결과, 제안된 알고리듬이 기존의 대표적인 비교 대상 알고리듬보다 우수함을 보였다. 정확도는 SNR 10 dB부터 -10 dB까지 ROC (Receiver Operating Characteristics) 곡선을 사용하여 비교하였다.

• Structural Engineering and Mechanics
• /
• 제29권4호
• /
• pp.433-453
• /
• 2008

The equation of motion of a one way (vertical) spanning strip wall, as an assembly of two rigid bodies, is presented. Only one degree of freedom is needed to completely describe the wall response as the bodies are assumed to be perfectly rectangular and are allowed to rock but not to slide horizontally. Furthermore, no arching action occurs since vertical motion of the upper body is not restrained. Consequently, the equation of motion is nonlinear, with non constant coefficients and a Coriolis acceleration term. Phenomena associated with overburden to self weight ratio, motion triggering, impulsive energy dissipation, amplitude dependency of damping and period of vibration, and scale effect are discussed, contributing to a more complete understanding of experimental observations and to an estimation of system parameters based on the wall characteristics, such as intermediate hinge height and energy damping, necessary to perform nonlinear time history analyses. A comparison to a simple standing, or parapet, wall is developed in order to better highlight the characteristics of this assembly.

• 한국자동차공학회논문집
• /
• 제9권3호
• /
• pp.190-200
• /
• 2001

The homogenization method is applied to maximize crash energy absorption for a given volume. To obtain the best combination of optimizing factors by resizing and threshold algorithms for an example problem, the sensitivity analysis has been performed using design of experiments. The results show that very little interaction among optimizing factors is found. Optimization analysis of several combination of factors is conducted; and the orignal design and a new design with holes for an example problem are compared for crash energy absorption.