• Journal of Korea Water Resources Association
• /
• v.35 no.5
• /
• pp.553-561
• /
• 2002

The objectives of this study are to introduce flash flood forecasting system in Korea and to develop a system for computing threshold runoff on very fine catchment scale. The developed GUI system composed of 9 steps starting from input data preparation to Input file creation for flash flood forecasting compute basin subdivision, hydrologic subbasin characteristics, bankfull flows, unit peak flows and threshold runoffs on about 5 $\textrm{km}^2$ scale. When the developed system was applied on Pyungchang IHP basin, the computed 1-hour threshold runoffs ranged 18.72~81.96mm with average value of 46.39mm. Judging from the comparison of the computed threshold runoffs between this study area and three other basins in United States, the computed results in this study were reasonable. It can be concluded that the developed system on ArcView/Avenue are useful for computing threshold runoff on small catchment and can be used as a component of flash flood forecasting system.

• Journal of Sensor Science and Technology
• /
• v.23 no.2
• /
• pp.114-121
• /
• 2014

We report a polysilicon active area membrane field effect transistor (PSAFET) pressure sensor for low stress deflection of membrane. The PSAFET was produced in conventional FET semiconductor fabrication and backside wet etching. The PSAFET located at the front side measured pressure change using 300 nm thin-nitride membrane when a membrane was slightly strained by the small deflection of membrane shape from backside with any physical force. The PSAFET showed high sensitivity around threshold voltage, because threshold voltage variation was composed of fractional function form in sensitivity equation of current variation. When gate voltage was biased close to threshold voltage, a fractional function form had infinite value at $V_{tn}$, which increased the current variation of sensitivity. Threshold voltage effect was dominant right after the PSAFET was turned on. Narrow transistor channel established by small current flow was choked because electron could barely cross drain-source electrodes. When gate voltage was far from threshold voltage, threshold voltage effect converged to zero in fractional form of threshold voltage variations and drain current change was mostly determined by mobility changes. As the PSAFET fabrication was compatible with a polysilicon FET in CMOS fabrication, it could be adapted in low pressure sensor and bio molecular sensor.

• Journal of Digital Contents Society
• /
• v.16 no.6
• /
• pp.951-959
• /
• 2015

Scene text extraction is important because it offers some important information on different image based applications pouring in current smart generation. Edge-Enhanced MSER(Maximally Stable Extremal Regions) which enhances the boundaries using the canny operator after extracting the basic MSER shows excellent performance in terms of text extraction. But according to setting the threshold of the canny operator, the result images using Edge-Enhanced MSER are different, so there needs a method figuring out the threshold. In this paper, we propose a AEMSER(Adaptive Edge-enhanced MSER) that applies the method extracting the boundary using the middle value of histogram to Edge-Enhanced MSER to get the canny operator's threshold. The proposed method can acquire better result images than the existing methods because it extracts the area only for the obvious boundaries.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.908-911
• /
• 2004

In this paper, we describe a robust image processing algorithm to recognize the road lane in real-time. For the real-time processing, a detection area is decided by a lane segment of a previous frame and edges are detected on the basis of the lane width. For the robust driving, the global threshold with the Otsu algorithm is used to get a binary image in a frame. Therefore, reliable edges are obtained from the algorithms suggested in this paper in a short time. Lastly, the lane segment is found by hough transform. We made a RC(Radio Control) car equipped with a vision system and verified these algorithms using the RC Car.

• Journal of the Korean Ceramic Society
• /
• v.33 no.5
• /
• pp.547-555
• /
• 1996

Porous alumina ceramics were fabricated by pseudo-boehmite phydosol-gel process within/without commercial $\alpha$-alumina particles average 1 and 40 micron respectively. The pore characteristics of fired specimens were studied by the measurement of bulk density total porosity thyermal analysis pore volume pore distribution BET area XRD and SEM. with increasing of firing temperature pore volume and BET surface area were decreased and the average pore size was increased to approximately 146$\AA$ upto 80$0^{\circ}C$ by de-watering of [OH] and formation of $\alpha$-alumina. The fired relative density of the alumina-dispersed specimen with average 1 micron particle was increased with the amounts of dispersed particle by bimodal packing theory which is compared to the ones of specimen including of average 40 micron particle. It was confirmed that the percola-tion threshold in porous ceramics with coarser particle (40 micron) has formed between the transformed-alumina from hydrogel and dispersed-alumina of above 50 vol% particle and the total porosity was increased at the threshold point above.

• International Journal of CAD/CAM
• /
• v.6 no.1
• /
• pp.81-87
• /
• 2006

This paper describes a method for extracting surfaces from multi-material CT (Computed Tomography) data. Most contouring methods such as Marching Cubes algorithm assume that CT data are composed of only two materials. Some extended methods such as [3, 6] can extract surfaces from the multi-material (non-manifold) implicit representation. However, these methods are not directly applicable to CT data that are composed of three or more materials. There are two major problems that arise from fundamentals of CT. The first problem is that we have to use n(n-1)/2 threshold values for CT data contains n materials and select appropriately one threshold value for each boundary area. The second is that we cannot reconstruct only from CT data in which area three or more materials are adjacent each other. In this paper, we propose a method to solve the problems by using image analysis and demonstrate the effectiveness of the method with application examples construct polygon models from CT data of machine parts.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.6
• /
• pp.77-82
• /
• 2012

In this paper, the new location management scheme based on region and movement threshold has been proposed in order to minimize the required cost to handle the resource location management signaling traffics under the wire/wireless convergent networks when the users are moving around the cold and hot regions. In this scheme, the sequential paging is supposed to be performed according to the movement threshold which can be changed in accordance with the number of movements that each mobile user had made while it is moving around the resource regions. With the proposed scheme, the cost of managing the location management traffics and efficient spectrum assignment overhead can be minimized by placing signaling traffics for location managements and also allocating radio spectrum considering individual movement behaviors.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.1
• /
• pp.35-41
• /
• 2017

We propose a novel multi-photodiode array (MPDA) based retinal implant IC with on/off stimulation strategy for a visual prosthesis with improved spatial resolution. An active pixel sensor combined with a comparator enables generation of biphasic current pulses when light intensity meets a threshold condition. The threshold is tuned by changing the discharging time of the active pixel sensor for various light intensity environments. A prototype of the 30-channel retinal implant IC was fabricated with a unit pixel area of $0.021mm^2$, and the stimulus level up to $354{\mu}A$ was measured with the threshold ranging from 400 lx to 13120 lx.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.257-260
• /
• 2002

This paper describes the pixel of AMOLED(act ive matrix organic light emitting diode) driving circuit by poly-sl technology. The area per pixel is 278um$\times$278um in 120$\times$160(2.2 inch) Driving the OLEDS with active matrix leads to the lower voltage operation, the lower peak pixel currents and the display with much greater efficiency and brightness The role of the active matrix is to provide a constant current throughout the entire frame time and is eliminating the high currents encountered In the passive matrix approach, This design can support the high resolutions expected by the consumer because the current variation specification is norestricted. The pixel has been designed driving TFT threshold voltage cancellation circuit and wide aperture ratio circuit that communizes 4 pixel. The test simulation results and layout are 11% per threshold-current var Eat ion and 12.5% the aperture ratio of increase.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.9
• /
• pp.2105-2113
• /
• 1995

The compressive tests under impact conditions were performed to establish a design guide for impact damage tolerance. The composition of layup was selected for the real cases of composite aircraft structure. The energy level of visible of visible damage threshold was determined as 7 Joules. It was found that the normalized bending stiffnesses in the direction of closely fixed boundary affected the area of damage. Graphite/epoxy used in the tests exhibited 60% reduction in compression strength at the energy level of visible damage threshold. Wet-conditioned specimens represented 9% reduction in residual compressive strength in comparison with room temperature ambient specimens. In this study, a design factor of 2.1 was proposed for the low velocity impact damage.