• 대한기계학회논문집B
• /
• 제38권6호
• /
• pp.525-538
• /
• 2014

무기체계 개발에서 예상치 못한 고속의 총탄 충격을 받았을 때 반응 시스템의 폭발 반응을 예측하는 것은 안정성 확보를 위하여 매우 중요하다. 본 연구에서는 LX-17(92.5% TATB, 7.5% Kel-F)과 AP 기반의 고체 추진제(88% AP, 12% HTPB)가 충전된 반응 시스템에 한계 속도로 충돌하는 총탄 충격을 가했을 경우 발생하는 폭굉 현상 및 파괴 거동을 I&G 모델이 적용된 2차원 하이드로 수치해석을 통해 규명하고자 하였다. 해석 결과, LX-17의 경우 충격-폭굉 천이 현상(SDT)이 주요한 메커니즘으로 작용한 반면 고체 추진제는 상대적으로 안정한 모습을 보였다. 즉, 시스템의 파괴는 내부 압력의 급격한 증가와 격렬한 화학반응을 동반하는 고에너지 물질의 폭굉 현상이 그 원인이며, 폭발등급이 낮은 경우에는 고속 충돌에도 발화되지 않아 커버가 완전 파쇄에 이르지 않는 것으로 관찰되었다.

• 한방재활의학과학회지
• /
• 제24권1호
• /
• pp.13-30
• /
• 2014

Objectives This study was designed to investigate the effects of Bambusae caulis in liquamen and Bambusae concretio silicae on blood sugar reduction and improvement of peripheral nerve function in diabetic rat models. Methods Diabetic rat models induced by streptozotocin were divided into five groups. We fed experimental group I of rats basal diet and administered normal saline (3 ml, 1 time/1 day) for 6 weeks. We fed experimental group II of rats basal diet and administered Bambusae caulis in liquamen (100 mg/kg, 1 time/1 day) for 6 weeks. We fed experimental group III, IV, V of rats basal diet and administered Bambusae concretio silicae (100 mg/kg, 200 mg/kg, 400 mg/kg once a day) for 6 weeks. We investigated weight and glucose level of rats, and carried out touch test, hot plate test, sensory & motor nerve conduction velocity test and immunohistochemical study after 48 hours, 2 weeks, 4 weeks and 6 weeks. Results 1. The weight of all experimental group was gradually decreased. And glucose level was significantly decreased in the experimental group II, III, IV, V as compared with experimental group I. Especially experimental group II, IV, V were significantly decreased as compared with experimental group III. 2. In the quantitative analysis by touch test and hot plate test, mechanical pain threshold and heat pain threshold were significantly decreased in the other experimental groups as compared with experimental group I. Especially experimental group II, IV, V were significantly decreased as compared with experimental group III. 3. In the sensory and motor nerve conduction velocity test, sensory and motor nerve conduction velocity were significantly increased in the other experimental groups as compared with experimental group I. Especially experimental group II, IV, V were significantly increased as compared with experimental group III. 4. In the substance P immunohistochemical study, experimental group II, IV, V showed strong immune response in spinal cord. Conclusions Bambusae caulis in liquamen and Bambusae concretio silicae were probably useful to treat patients with diabetic peripheral neuropathy.

• 대한기계학회논문집A
• /
• 제27권1호
• /
• pp.200-207
• /
• 2003

In this paper, the effect of the compressive residual stresses which were obtained under the various shot velocities of shot balls on the fatigue behaviors of a spring steel, were investigated. The examination of CT specimen test were executed with the materials(JISG SUP9) which are being commonly used for the springs of automotive vehicles. As a result, the optimal shot velocity of shot balls were acquired considering the peak values of the compressive residual stresses on the surface of specimen and effect on the speed of the fatigue crack propagation da/dN in stage II and the threshold stress intensity factor range Δ$K_{th}$ in stage I. Also the material constant C and the crack propagation index m in the formula of paris law da/dN= C $({\Delta}K^m)$ were suggested in this work to estimate the dependency on the shot velocity.

• 한국정보시스템학회지:정보시스템연구
• /
• 제19권1호
• /
• pp.1-17
• /
• 2010

This paper proposes an updating policy of indoor moving object databases (IMODB) for location-based services. our method applies the Ka1man filter on the recently collected measured positions to estimate the moving object's position and velocity at the moment of the most recent measurement, and extrapolate the current position with the estimated position and velocity. If the distance between the extrapolated current position and the measured current position is within the threshold, in other words if they are close then we skip updating the IMODB. When the IMODB needs to know the moving object's position at a certain moment T, it applies the Kalman filter on the series of the measurements received before T and extrapolates the position at T with the estimations obtained by the Kalman filter. In order to verify the efficiency of our updating method, we performed the experiments of applying our method on the series of measured positions obtained by applying the fingerprinting indoor positioning method while we are actually walking through the test bed. In the analysis of the test results, we estimated the communication saving rate of our method and the error increment rate caused by the communication saving.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권4호
• /
• pp.426-435
• /
• 2005

The lightness of components required in automobile and machinery industries is requiring high strength of components. Therefore this requirement is accomplished as the process of shot-peening method that the compressive residual stress is made on the metal surface as one of various improvement methods. Special research is, therefore, needed about compressive residual stress on the metal surface in the process of shot-peening method. Therefore, in this paper the effect of compressive residual stress of spring steel(JISG SUP-9) by shot-peening on fatigue crack growth characteristics in environmental condition(temperature) and mechanical condition(shot velocity, stress ratio) was investigated with considering fracture mechanics. By using the methods mentioned above, the following conclusions have been drawn. (1) The fatigue crack growth rate(da/dN) of the shot-peened material was lower than that of the un-peened one. In high temperature range. fatigue crack growth rate decreased with increasing temperature range, while fatigue crack growth rate increased by decreasing temperature in low temperature. (2) Fatigue life shows more improvement in the shot-peened material than in the un-peened material. And compressive residual stress of surface on the shot-peen processed operate resistance force of fatigue crack propagation.

• 한국정밀공학회지
• /
• 제21권3호
• /
• pp.100-108
• /
• 2004

Contamination of environment induces the shortage of drinkables. In this trend, the leakage of water that occurs by breakage or erosion of rubber valve seats is serious problem. Rubber is apt to cause breakage between two materials when they contact with each other. The possible way to avoid leakage of water by damage and breakdown of rubber is to replace that with metal. Because of this reason, nowadays, rubber is being substituted with metal as valve seat materials for water works. In tribology, a severe from of wear is characterized by local, macroscopic material transfer, removal, or formation of surface protrusions when two solid surfaces experience relative sliding under load. One of the major problems in sliding of metals is galling due to bad surface quality. Experimentally, there are various elements which influence on incipient galling, such as hardness, surface roughness, temperature, load, velocity and external environments. This paper is aimed at verifying the galling tendencies according to hardness, surface roughness, load and velocity and showing how much effect the factors have on the galling tendencies.

• Geomechanics and Engineering
• /
• 제13권6호
• /
• pp.977-995
• /
• 2017

It is well accepted that rock failure mechanism influence the cutting efficiency and determination of optimum cutting parameters. In this paper, an attempt was made to research the factors that affect the failure mechanism based on discrete element method (DEM). The influences of cutting depth, hydrostatic pressure, cutting velocity, back rake angle and joint set on failure mechanism in rock-cutting are researched by PFC2D. The results show that: the ductile failure occurs at shallow cutting depths, the brittle failure occurs as the depth of cut increases beyond a threshold value. The mean cutting forces have a linear related to the cutting depth if the cutting action is dominated by the ductile mode, however, the mean cutting forces are deviate from the linear relationship while the cutting action is dominated by the brittle mode. The failure mechanism changes from brittle mode with larger chips under atmospheric conditions, to ductile mode with crushed chips under hydrostatic conditions. As the cutting velocity increases, a grow number of micro-cracks are initiated around the cutter and the volume of the chipped fragmentation is decreasing correspondingly. The crack initiates and propagates parallel to the free surface with a smaller rake angle, but with the rake angle increases, the direction of crack initiation and propagation is changed to towards the intact rock. The existence of joint set have significant influence on crack initiation and propagation, it makes the crack prone to propagate along the joint.

• 한국전자통신학회논문지
• /
• 제17권3호
• /
• pp.393-398
• /
• 2022

윈드프로파일러 시제품의 시험 운용 기간 중 스펙트럼에 전파 간섭(RFI: Radio Frequency Interference) 오염이 발생하였다. 윈드프로파일러 spectra에 나타나는 전파 간섭 제거 알고리즘의 개발 과정과 그 결과를 조사하였고, 전파 간섭을 제거하기 위한 새로운 알고리즘을 개발하였다. 스펙트럼 폭의 임계값 0.1 m/s로 우선 필터링하고 연직 빔인지 경사 빔인지에 따라 동일한 시선속도가 연속되는 gate 수 범위를 결정하였다. 전파 간섭 오염은 비기상 신호의 필터링과 스캔을 통해 제거되었고, 개선된 스펙트럼의 시선속도로부터 산출된 바람벡터의 연속성으로 검증되었다.

• 한국정보통신학회논문지
• /
• 제19권3호
• /
• pp.715-723
• /
• 2015

본 논문에서는 이동 에드혹 네트워크(Mobile Ad hoc Network: MANET)에서의 상황인식 기반의 스케쥴링 기법인 DDV(Dynamic Direction Vector)-hop알고리즘을 제안한다. 기존 MANET에서는 노드의 이동성으로 인한 동적 네트워크 토폴리지, 네트워크 확장성 결여의 대한 취약성을 지니고 있다. 본 논문에서는 계층적 클러스터 단위의 동적인 토폴로지에서 노드가 이동하는 방향성 및 속도에 대한 노드의 이동 속성 정보를 고려하여 클러스터를 생성 및 유지하는 DDV-hop 알고리즘을 제안한다. 제안된 알고리즘은 클러스터 헤드노드를 기준으로 클러스터 멤버노드의 방향성 및 속도의 속성 정보를 비교하여 유사한 노드간 클러스터링을 구성하고, 이로부터 헤드노드를 선택하는 방법이다. 실험결과, 제안하는 알고리즘이 네트워크의 부하를 감소시키고 네트워크 토폴로지를 안정적으로 유지할 수 있음을 확인하였다.

• 비파괴검사학회지
• /
• 제21권3호
• /
• pp.281-287
• /
• 2001

2차원 음향방출 위치표정에서 전통적인 방법으로 문턱 전압값을 설정하여 도달시간차를 측정함으로써 2개의 쌍곡선을 형성하는 데는 해당 구조물에서 직접 측정한 속도를 이용하게 된다. 복합재료 적층판과 같은 이방성 재료에서는 섬유의 배열방향에 따라 탄성계수가 변하므로 속도가 섬유의 방향성에 의존하게 된다. 따라서 임의의 위치에서 발생한 탄성파의 도달시간차 측정에 의한 위치표정의 오차가 커지며, 위치표정의 과정이 복잡해지는 것을 피할 수 없다. 본 연구에서는 전통적인 음향방출 위치표정에서 쌍곡선의 2중 교점의 오차를 정정하기 위해 사용되어야 하는 제 4의 센서를 사용하지만 속도변화에 기인하는 위치표정의 오차를 줄일 수 있는 방법으로 수치해석에 의해 비선형방정식을 풀어내는 위치표정 알고리즘을 제안하였다. 또한 제안된 방법이 전통적인 방법에 비해 이방성 판에서의 2차원 위치 표정을 보다 간단하게 수행하고, 정확도를 향상할 수 있는 방법임을 실험적으로 입증하였다.