• 대한치과재료학회지
• /
• 제44권1호
• /
• pp.69-77
• /
• 2017

The aim of this study was to investigate the effects of chitosan powder addition on the strengthening of conventional glass ionomer cement. Two types of chitosan powders with different molecular weight were mixed with conventional glass ionomer cement (GIC): low-molecular weight chitosan (CL; 50~190 kDa), high-molecular weight chitosan (CH; 310~375 kDa). The chitosan powders (CL and CH) were separately added into the GIC liquid (0.25-0.5 wt%) under magnetic stirring, or mixed with the GIC powder by ball-milling for 24 h using zirconia balls. The mixing ratio of prepared cement was 2:1 for powder to liquid. Net setting time of cements was measured by ISO 9917-1. The specimens for the compressive strength (CS; $4{\times}6mm$), diametral tensile strength (DTS; $6{\times}4mm$), three-point flexure (FS; $2{\times}2{\times}25mm$) with flexure modulus (FM) were obtained from cements at 1, 7, and 14 days after storing in distilled water at $(37{\pm}1)^{\circ}C$. All mechanical strength tests were conducted with a cross-head speed of 1 mm/min. Data were statistically analyzed by one-way ANOVA and Tukey HSD post-hoc test. The mechanical properties of conventional glass ionomer cement was significantly enhanced by addition of 0.5 wt% CL to cement liquid (CS, DTS), or by addition of 10 wt% CH (FS) to cement powder. The CL particles incorporated into the set cement were firmly bonded to the GIC matrix (SEM). Within the limitation of this study, the results indicated that chitosan powders can be successfully added to enhance the mechanical properties of conventional GIC.

• Physical Therapy Rehabilitation Science
• /
• 제10권3호
• /
• pp.311-319
• /
• 2021

Objective: To investigate the effect of emphasized initial contact by using a wearable air-pressure insole to provide auditory-feedback with variations of maximum peak pressure (MPP) of the affected side on spatiotemporal gait parameters and gait symmetry of stroke patients Design: A cross-sectional study Methods: Eighteen stroke patients participated in this study. All subjects walked five trials using an air-pressure insole that provides auditory feedback with different thresholds set on the insole. First, subjects walked without any auditory feedback. Then, the MPP threshold on the affected side was set from 70% and increase threshold by 10% after each trial until 100%. They walked three times or more on the gait analyzer for each trial, and the average values were measured. Before starting the experiment, subjects measured body weight, initial gait abilities and affected side MPP without auditory feedback. Results: Temporal and spatial variables were significantly increased in trials with auditory feedback from air-pressure insole except for non-paralyzed single support time and spatial gait symmetry compared to trials without auditory feedback(p<0.05). Among the four different thresholds, the walking speed, unaffected side single support time, affected and unaffected side stride, and affected side step length were greatest at 80% threshold of maximum peak, while affected single support time, temporal gait symmetry, and unaffected step length were greatest at the maximum peak of 100% threshold. Conclusions: These results indicate that auditory feedback gait using air-pressure insoles can be an effective way to improve walking speed, single support time, step length, stride, and temporal gait symmetry in stroke patients.

• 한국측량학회지
• /
• 제39권5호
• /
• pp.343-349
• /
• 2021

In The process from design to construction in the existing construction work was less efficient due to the contradictory approach of identifying the 3D state in the plan view and the repeated generation of surveys, floor plans, drawings. Accurate 3D design data is essential for smart construction. However, most of the existing related studies have focused on explaining the development method and main functions of equipment or improving the productivity of smart construction. Therefore, in this study, the utility of 3D design model generation for smart construction and construction survey using 3D laser scanner was evaluated. Plane and vertical road alignment were created using the specifications of the road. The generated road alignment was created as a three-dimensional corridor design using cross-sections at intervals of 20m. In addition, it was possible to create a DTM (Digital Terrain Model) using a digital map and effectively create a 3D design model for the study area through overlapping. Construction survey using a 3D laser scanner showed accuracy within 10cm as a result of the accuracy evaluation. These results proved that construction surveying using a 3D laser scanner is possible because it satisfies the acceptable accuracy of the relevant regulations modeling of target areas using 3D design and construction survey using 3D laser scanner can be a way to address shortcomings of existing GNSS (Global Navigation Satellite System) methods. And accurate 3D data will be used as essential data as basic data for smart construction.

• Steel and Composite Structures
• /
• 제32권4호
• /
• pp.479-495
• /
• 2019

In tied-arch bridges, the way the arch and the deck are connected may become crucial. The deck is usually suspended from hangers made out of steel pinned cables capable of resisting axial forces only. However, a proper structural response may be ensured by fixing and stiffening the hangers in order to resist, additionally, shear forces and bending moments. Thus, this paper studies the effect of different pinned and stiffened hanger arrangements on the structural behavior of the tied-arch bridges, with the intention of providing designers with useful tools at the early steps of design. Longitudinally and transversally stiffened hangers (and the effect of hinges at the hangers and their locations) are studied separately because the in-plane and the out-of-plane behavior of the bridge are uncoupled due to its symmetry. As a major conclusion, regarding the in-plane behavior, hangers composed of cables (either with vertical, $Nielsen-L\ddot{o}hse$ or network arrangements) are recommended due to its low cost and ease of erection. Alternatively, longitudinally stiffened hangers, fixed at both ends, can be used. Regarding the out-of-plane behavior, and in addition to three-dimensional arrangements of cables, of limited effectiveness, transversally stiffened hangers fixed at both ends are the most efficient arrangement. A configuration almost as efficient and, additionally, cheaper and easier to build can be achieved by locating a hinge at the end corresponding to the most flexible structural element (normally the arch). Its efficiency is further improved if the cross-section tapers from the fixed end to the pinned end.

• 국제지역연구
• /
• 제20권1호
• /
• pp.251-275
• /
• 2016

본 연구는 기존 문헌 조사를 통해 다음과 같은 세 가지 질문에 대한 해답을 제시하고자 한다: 1) 브라질 문화의 핵심을 구성하는 '제이칭뉴(jeitinho)'의 역사적 배경 및 문화적 특성은 무엇인가? 2) '제이칭뉴'와 '연고주의' 간 유사점 및 차이점은 무엇인가? 그리고 마지막으로 3) '제이칭뉴'로 대표되는 브라질의 고유한 문화적 특성을 고려, 브라질에 진출한 한국 기업의 관점에서 성공적인 현지 비즈니스를 위해 이들 기업이 취해야 할 바람직한 인사 조직 관리전략은 무엇인가? 지금까지 '제이칭뉴'와 연고주의를 각각 살펴본 일련의 선행 연구는 이를 서로 다른 두 가지 시각, 즉 긍정적인, 또는 부정적인 시각에서 살펴보았으며, 본 연구는 이들 연구 결과를 정리, 비교함으로써 '제이칭뉴'와 연고주의의 유사점과 차이점을 비교, 분석했다. 본 연구는 더 나아가 이러한 비교 분석 결과가 특히 브라질에 진출한 한국 다국적 기업의 현지 문화 통합 전략 수립과 관련하여 가지는 의미를 이론적 관점에서 함께 논의했다.

• 한국전문물리치료학회지
• /
• 제31권1호
• /
• pp.8-17
• /
• 2024

Background: Sleep accounts for approximately one-third of a person's lifetime. It is a relaxing activity that relieves mental and physical fatigue. Pillows of different sizes, shapes, and materials have been designed to improve sleep quality by achieving an optimal sleep posture. Objects: This study aimed to determine which pillow provides the most comfortable and supports the head and neck during sleep, which may enhance sleep quality. Methods: Twenty-eight healthy adults (19 males and 9 females) with an average age of 29 years participated in this cross-sectional study. This experiment was conducted while the participants laid down for 5 minutes in four different pillow conditions: (1) no pillow (NP), (2) neck support foam pillow (NSFP), (3) standard microfiber filled pillow (SFP), and (4) hybrid foam pillow (HFP). The head-neck peak pressure, cranio-vertebral angle in supine (CVAs), cranio-horizontal angle in supine (CHAs), chin-sternum distance (CSD), and muscle tone of sternocleidomastoid were analyzed using one-way repeated measures analysis of variance (ANOVA). The significance level was set at p < 0.05. Results: The head-neck peak pressure was the highest in the NSFP condition, followed by the NP, SFP, and HFP conditions. The CVAs, CHAs, and CSD of the SFP were lower than those of the other pillows. Muscle tone was the highest in the NP condition, followed by the of NSFP, HFP, and SFP conditions. The participants subjective comfort level in both the supine and side-lying postures was highest in the HFP condition, followed by the SFP and NSFP conditions. Conclusion: This study can be used to establish the importance of pillow selection for high-quality sleep. The results of this study, suggest that a hybrid pillow with a good supportive core and appropriate fluffiness can maintain comfort and correct cervical spine alignment during sleep.

• Journal of Chest Surgery
• /
• 제34권7호
• /
• pp.534-538
• /
• 2001

배경: 기관의 크기와 기관주위의 정상형태에 대한 지식은 임상에서 기도나 호흡관리, 그리고 기관재건술을 시행하는데 중요한 정보가 된다. 흉부 단순촬영은 기관의 직경을 재는 간단한 방법이지만 그 상이 확대되는 경향과 측면촬영에서 어깨와 상이 겹쳐서 나타나는 단점이 있다. 이에 저자들은 한국인 정상 성인의 기관의 정상치를 알기 위해 흥부 전산화 단층촬영을 이용하여 기관의 내경과 단면적을 측정하였다. 대상 및 방법: 남자 43명과 여자34명을 대상으로 하여 각각 나이에 따라 20~39세는 제 1군, 40~59세는 제2군, 60세 이상은 제 3군으로 구분하였다. 흉부 유입구와(Level 1) 대동맥궁에서(Level 2) 흉부 전산화 단층촬영을 이용하여 각각 전후경과 횡경을 재고 그 단면적을 구하였다. 결과: level 1에서 한국인 성인 남자의 기관의 전후경은 15.95$\pm$2.99 m, 횡경은 17.72$\pm$2.13 m이었고, 여자의 경우 전후경은 15.56$\pm$2.12 m, 횡경은 14.18$\pm$2.07mm로 남녀간에 유의한 차이가 있었다(p 0.05). Level 2에서 남자의 전후경은 19.77$\pm$2.57 m, 횡경은 18.02$\pm$2.19 mm이었고 여자의 전후경은 15.35$\pm$1.82 m, 횡경은 15.00$\pm$1.60 mm로 남녀간에 유의한 차이가 있었다 (p 0.05). 기관단면적은 남자가 각 Level에서 279.14$\pm$61.37 $\textrm{mm}^2$(Level 1), 281.93$\pm$63.97 $\textrm{mm}^2$(level 2)였고, 여자가 173.29$\pm$35.81 $\textrm{mm}^2$(Level 1), 181.88$\pm$34.74 $\textrm{mm}^2$(Level 2)로 두 위치에서 단면적은 남녀간에 유의한 차이가 있었다(p 0.05). 기관의 각각의 위치에서 내경과 단면적은 연령군에 따라 고연령층에서 증가하는 추세를 나타내었으나 통계적인 의미는 없었다. 결론: 한국 정상 성인의 기관내경과 단면적의 크기는 성별에 따라 통계적으로 유의한 차이가 있었으나 연령에 따른 차이는 없었고, 전산화 단층촬영은 기관의 내경과 단면적의 크기를 얻는데 비교적 정확하고 안전한 방법이라 생각된다.

• Journal of Animal Science and Technology
• /
• 제53권1호
• /
• pp.29-34
• /
• 2011

본 연구에서는 Landrace, Large White와 Duroc 3품종의 3원 교잡 시스템으로 비육돈을 생산하는 9개 농가를 대상으로 Landrace와 Large White 교배를 통해 생산된 $F_1$ 모돈과 Duroc 웅돈 그리고 비육돈을 이용하여 기 보고한 바 있는 돼지 이력추적 및 브랜드육 식별을 위한 13종의 MS marker의 개체판별능과 혈연관계 추정 효율을 실증하였다. 우선 $F_1$ 모돈과 웅돈 즉 부모 집단을 대상으로 API-CALC version 1.0 프로그램을 이용하여 무작위 교배집단, 반형매 교배집단 그리고 전형매 교배집단으로 가정시 개체 판별능이 각 각 $4.94{\times}10^{-34}$, $8.16{\times}10^{-23}$ 그리고 $2.01{\times}10^{-08}$으로 추정되었으며, 비육돈을 포함한 추정치는 $3.74{\times}10^{-35}$, $5.48{\times}10^{-25}$ 그리고 $2.96{\times}10^{-11}$으로 추정되었다. 또한 Cervus version 2.0을 이용하여 친자감별률을 추정한 결과 100% 인 것으로 추정되었다. 이론적으로 산출된 상기의 수치들을 검증하기 위해 PAPA version 2.0 프로그램을 이용하여 비육돈 전체 452두에 대한 친자감별을 실시한 결과 100% 친부모를 확인 할 수 있었으며, Cervus 프로그램을 이용하여 전체 축군에서 동일한 대립유전자형을 가진 개체의 출현을 조사한 결과 동일개체는 존재하지 않는 것을 확인하였다. 비록 개체 판별능에 대한 실증은 제시한 이론적 판별능에 상응하는 두수를 검증하지는 못하였으나, 친자확인의 경우는 제시한 이론적 효율성 100%는 실증적으로 검증되었다. 따라서 현재 국내에서 행해지는 3 품종 교잡에 의한 비육돈 생산 시스템의 경우 본 연구의 결과로 비추어 볼 때 13 MS marker를 이용하여 체계화된 전산정보와 병행하여 계열화된 생산체계하의 브랜드 단위 또는 지역별 권역으로 구분하는 이력추적이 충분히 가능하다고 사료된다.

• Restorative Dentistry and Endodontics
• /
• 제33권1호
• /
• pp.66-75
• /
• 2008

본 연구에서는 근관형성의 치근단 크기가 근관 충전의 치근단 폐쇄에 미치는 영향에 대해 알아보고자 하였다. 36개의 단근관, 단근치를 대상으로 3가지 치근단 크기 (Master apical file : #25, #40, #60)에 따라 3가지 실험군으로 나누어 $Profile^{(R)}$과 $LightSpeed^{(R)}$를 이용하여 근관을 확대하고, Modified continuous wave technique으로 근관충전을 시행하였다. 미세누출의 측정을 위해 실험군당 10개의 치아를 1주일간 India ink에 넣어 색소 침투를 일으키고 치아를 투명화시켜 미세누출의 정도를 측정하였다. 미세누출에 치근단 크기가 미치는 영향을 분석하기 위하여 Kruskal-Wallis one-way ANOVA를 시행하였고, 사후 검정을 위하여 Student-Newman-Keuls method를 시행하였다. 또한, 치아 단면의 형태를 관찰하기 위하여 색소 침투까지 실행된 각 실험군당 2개의 치아를 근첨 1 mm에서 4 mm까지 1 mm간격으로 수평 절단하고 사진 촬영하였다. 각 실험군에서 측정된 미세누출양을 Krustal-Wallis one-way ANOVA에서 분석한 결과 치근단 크기는 유의성 있게 (P < 0.05) 미세누출에 영향을 미쳤으며 치근단 크기가 클수록 미세누출의 평균간과 표준편차 값은 감소하는 경향을 보였다. Student-Newman-Keuls method를 통한 사후 검정에서 치근단 크기가 #25 - #40, #25 - #60에서 유의 한 차이를 보였으며 #40 - #60간에는 통계적인 유의차는 없었다. 단면형태에서는 대부분의 치아에서 난원형의 근관 형태를 관찰 할 수 있었고, 치근단의 크기가 작을수록 성형된 근관에 불규칙한 내면이 존재하였고 gutta-percha나 sealer로 충전되지 않는 recess의 면적이 증가함을 알 수 있었으며 이러한 recess는 미세누출의 통로가 됨을 확인 할 수 있었다. 본 연구 결과, Modified continuous wave technique으로 근관충전시 근관 형성된 치근단 크기가 커질수록 보다 일관되고 성공적 인 결과를 예상할 수 있는 근관충전을 시행할 수 있음을 알 수 있었다.

• 식물조직배양학회지
• /
• 제24권4호
• /
• pp.239-256
• /
• 1997

Plants belonging to the category of 2n apomixis or agamospermy form embryos and seeds without the processes of normal meiosis and syngamy. Seeds produced in this way have identical genotype of their maternal parent. Three different types of agamospermy are recognized: diplospory, apospory, and adventitious (adventive) embryony. $F_1$ hybrid cultivars cannot be used as seed sources in the next ($F_2$) generation because this generation would be extremely variable as a result of genetic segregation. Hybrid vigor is also reduced in the $F_2$ generation. Therefore, parental stocks for hybrid seed production need to be maintained and cross must be continuously repeated. Agamospermic 2n apomixis would make it possible to fix the genotype of a superior variety so that clonal seeds faithfully representing that genotype could be continuously and cheaply produced independent of pollination. That is, $F_1$ hybrid seeds could be produced for many generations without loss of vigor or genotype alteration. Production of apomictic $F_1$ hybrid seed would be simplified because line isolation would not be necessary to produce seed or to maintain parental lines, and the use of male-sterile lines could be avoided. Overall, apomixis would enable a significant reduction in hybrid seed production costs. Additionally, the production of clonal seed is not only important for seed propagated crops, but also for the propagation of heterozygous fruit trees and timbers. Clonal seed would help avoid costly and time-consuming vegetative propagating methods that are currently used to ensure the large-scale production of these plants. Apomixis is scattered throughout the plant kingdom, but few important agricultural crops possess this trait Therefore, most research to date has centered on introgressing the trait of apomixis into agricultural crops such as wheat, maize, and some forage grasses from wild distant relatives by traditional cross breeding. The classical breeding approach, however is slow and often impeded by many breeding barriers. These problems could be surmounted by taking mutagenesis or molecular approach. Arabidopsis thaliana is a tiny sexually reproducing plant and is convenient in constructing and screening in molecular researches. Male-sterile mutants of Arabidopsis are particularly suitable genetic background for mutagenesis and screening for apomictic mutants. Molecular approaches towards isolating the genes controlling the apomictic process are feasible. Direct isolation of genes conferring apomixis development would greatly facilitate the transfer of this trait to wide variety of crops. Such studies are now in progress.