• Animal Bioscience
• /
• v.34 no.5
• /
• pp.886-894
• /
• 2021

Objective: An experiment was conducted to study the effect of graded concentration of digestible lysine (dLys) on performance of layers fed diets containing sub-optimal level of protein. Methods: Five diets were formulated to contain graded concentrations of dLys (0.700%, 0.665%, 0.630%, 0.593%, and 0.563%), but similar levels of crude protein (15% CP), energy (10.25 MJ ME/kg) and other nutrients. A total of 3,520 hens (26 wk of age) with mean body weight of 1,215+12.65 g were randomly divided into 40 replicate groups of 88 birds in each and housed in an open sided colony cage house. Each diet was offered ad libitum to eight replicates from 27 to 74 wk of age. The performance was compiled at every 28 d and the data for each parameter were grouped into three phases, that is early laying phase (27 to 38 wk), mid laying phase (39 to 58 wk), and late laying phase (59 to 74 wk of age) for statistical analysis. Results: Egg production, egg mass and feed efficiency (feed required to produce an egg) were significantly improved by the dLys level during the early and mid laying phases but not during the late phase. Whereas feed intake was significantly reduced by dLys concentration during mid and late laying phases but not during early laying phase. The egg weight was not affected by dLys concentration in any of the three phases. Conclusion: Based on best fitted statistical models, dietary requirements of dLys worked out to be 0.685%, 0.640%, and 0.586% during early phase, mid phase, and late egg laying phase, respectively. The calculated requirement of dLys for the respective production phases are 727 mg/b/d during the early and mid laying phases and 684 mg/b/d during the late laying phase in diets containing 15% CP.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.12
• /
• pp.3971-3976
• /
• 2012

A simple method was developed for the analysis of seven stilbene-type fluorescent whitening agents (FWAs) in paper materials by ion-pair reversed-phase high-performance liquid chromatography with fluorescence detection. These stilbene-type FWAs included two disulfonate, two tetrasulfonate, and three hexasulfonate compounds. After optimization of chromatographic conditions, the FWAs were satisfactorily separated using a reversed-phase column (RP-18) with the following isocratic mobile phase: methanol-water (60:40) containing 17.5 mM TBABr and 10 mM citrate buffer (pH = 7.0). The calibration plot was linear in the range from 5 to 500 ng/mL for two disulfo-FWAs and from 1 to 500 ng/mL for the other five FWAs. Precision levels of the calibration curve as indicated by RSD of response factors were 1.2 and 8.1%. Limits of quantitation (LOQ) ranged from 1.2 to 11 ng/mL.

• Journal of Acupuncture Research
• /
• v.40 no.1
• /
• pp.67-77
• /
• 2023

This study individually analyzed the effects of Korean Facial Chuna Manual Treatment (K-FCMT) combined with Korean medicine (KM) treatment (acupuncture, electroacupuncture, pharmacopuncture, and herbal medicine) on five patients with acute Bell's palsy who visited Dongsuwon Korean Medicine Hospital between August 1 and 31, 2022. During inpatient treatment, two of the five patients received K-FCMT 5-6 times a week, and the other three received the same frequency during outpatient treatment for approximately 2 weeks. Patients with a House-Brackmann grading scale (HBGS) score of ≤4 and Yanagihara unweighted grading system (Y-score) ≥7-8 began to recover after the 2nd-3rd sessions of K-FCMT, which entered the recovery phase quickly. As patients entered the recovery phase (7-9th sessions of K-FCMT), symptoms improved to HBGS scores of 1-2 and Y-scores of 35-40 points. This study suggests the possibility of applying K-FCMT combined with KM treatment to patients in the acute stage of Bell's palsy.

• The Research Journal of the Costume Culture
• /
• v.28 no.6
• /
• pp.771-786
• /
• 2020

This study aims to develop a life-friendly, wrap-one-piece style dance sports practice wear considering the physical characteristics of middle-aged, abdominally obese women. These types of practice wear allow people to enjoy exercise easily and to wear these garments as daily wear while meeting the requirements for dance sports wear. The three participants selected for this study were all women with five or more years of dance sports experience and were all average sized on Korea's abdominal obesity scale. In the first phase of the study, practice wear was created in a total of nine styles with three different styles of neckline depths for three different styles of dress skirt lengths. In the second phase of the study, the practice wear was created in 15 styles with five different styles of sleeve lengths for three different styles of waistline heights. After analyzing the design preferences of the participants, the fit preferences of the designs were evaluated and the final appearance was analyzed in order to suggest a pattern. The results of the subjects' first and second preference evaluations showed a preference for a 10 centimeter neckline depth, for high waistlines, and for elbow to wrist-length sleeves. The implementation of this research is expected to be extensive, as its results can be used as basic data for making lifestyle dance sports practice wear that covers the physical insecurities of middle-aged, abdominally obese women and enables them to enjoy their leisure time.

• Archives of Craniofacial Surgery
• /
• v.22 no.1
• /
• pp.45-51
• /
• 2021

Background: Mandibular deficiency leading to facial asymmetry causes cosmetic deformity as well as psychological stigma for the patient. Correction of these mandibular asymmetries is a major challenge. The study investigates the efficacy of bidirectional mandible distraction for the treatment of mandibular deficiency. Methods: This prospective study included six individuals aged between 17 and 24.4 years. Five patients had hemifacial microsomia and one had unilateral temporomandibular joint ankyloses. All patients underwent mandibular distraction osteogenesis. Postoperative skeletal changes in affected mandible, and changes in occlusal plane and oral commissure cant were evaluated using three-dimensional reconstruction. Patient satisfaction and understanding of the procedure were assessed through three questionnaires administered during pre-distraction, distraction and post-distraction phases. Results: In pre-distraction phase, aesthetic appearance seemed to be the primary indication for surgery. In distraction phase, pain while chewing was the primary handicap. In post-distraction phase all patients were satisfied with the aesthetic outcome. The facial deformity was improved through mandibular distraction osteogenesis. On the affected side in all the patients, height and length of the mandible increased. Canting of the occlusal plane and oral commissure was corrected. Conclusion: Bidirectional mandible distraction is an effective treatment for correction of mandible deformities in adult patients.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.8
• /
• pp.2101-2112
• /
• 1994

A two-dimensional biomechanical model was developed in order to calculated the lower extremity kinematics and kinetics during level walking. This model consists of three segments : the thigh, calf, and foot. Each segment was assumed to be a rigid body ; its motion to be planar in the sagittal plane. Five young males were involved in the gait experiment and their anthropometric data were measured for the calculation of segmental masses and moments of inertial. Six markers were used to obtain the kinematic data of the right lower extremity for at least three trials of walking at 1.0m/s, and simultaneously a Kistler force plate was used to obtain the foot-floor reaction data. Based on the experimental data acquired for the stance phase of the right foot, calculated vertical joint forces reached up to 0.91, 1.05, and 1.11 BW(body weight) at the hip, the knee, the ankle joints, respectively. The flexion-extension moments reached up to 69.7, 52.3, and 98.8 Nm in magnitude at the corresponding three joints. It was found that the calculated joint loadings of a subject were statistically the same for all his three trials, but not the same for all five subjects involved in the gait study.

• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.3
• /
• pp.228-234
• /
• 2008

The purpose of this study was to predict environmental distribution of anthracene, benzene, benzo[a]pyrene, 1-methylphenanthrene and phenanthrene in a four phase biopile system - air, water, soil and non aqueous phase liquid (NAPL) phase using level I fugacity model. Soil samples used for this study were collected from three sites in the United Kingdom which were historically contaminated with petroleum hydrocarbons. The level I fugacities (f) for the five contaminants were markedly different, however, the fugacities of each contaminant in three soil samples did not show significant difference. NAPL and soil were the dominant phases for all five contaminants. Results of this study indicated that difference in percentage of organic carbon strongly influenced the partitioning behavior of the cntaminants. The presence of benzene calls for an urgent need for risk-based management of air and water phase. Whereas insignificant amount of chemicals leached in the water phase for other organic contaminants showing greatly reduced potential of groundwater contamination. Furthermore, this study helped us to confirm the association of risk critical contaminants with the residual saturation in treated soils. They also can be used to emphasize the importance of accounting for the partitioning behavior of both NAPL and soil phases in the process of the risk assessment of the sites contaminated with petroleum hydrocarbons.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.4
• /
• pp.358-363
• /
• 2010

This paper proposes a step-by-step method of determining the parameters of equivalent circuit which is considered the no load losses for the single phase induction motor which has the starting winding. This method is comprised of three steps, and the stator resistance which is measured by the method of voltage drop is treated as constant and the stator and the rotor leakage reactances are assumed to be the same in every step. The test results of no load and locked rotor test are used in the 1st and 2nd step, and the ratings of name plate of the motor are needed in the 3rd step. In the 1st step, the traditional equivalent circuit parameters are directly calculated by no load and locked rotor conditions. In the next step, five nonlinear simultaneous equations for five unknown parameters can be set up by no load and locked rotor equivalent circuits. These equations are solved by using the initial parameters obtained by the 1st step parameters. In the final step, three nonlinear simultaneous equations for rotor winding resistance, leakage reactance and no load losses component resistance can be set up by equivalent circuit under the rated operation. Three parameters are solved by using the 2nd step parameters. Thus, equivalent circuit parameters are gradually refined step by step. The validity of the proposed method is evaluated by comparing the computed values obtained by the equivalent circuit parameters with the experimental values of the load test.

• Journal of Wetlands Research
• /
• v.18 no.1
• /
• pp.94-99
• /
• 2016

Non-point source control has been issued and intensively studied for the control of water quality in streams and rivers. In this study, non-point source pollutants monitoring was conducted at the end of five small streams which were connected to a main stream in three stages including Phase I (one hr before the rainfall), Phase II (one hr after the rainfall), and Phase III (six hrs after the rainfall). For all five small streams, the concentrations and loading rates of non-point source pollutants significantly increased due to the rainfall. As a result of this, priority control streams and priority pollutants were suggested to prepare for future plans of the non-point source control.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.11
• /
• pp.87-96
• /
• 2012

This paper propose a development of surface permanent mount synchronous generator(SPMSG) for 5-phase 5Kw in order to study a polyphase ac machinery that keep hold of advantages more than traditional three-phase squirrel-cage induction motor, such as reducing a amplitude of torque pulsation decreasing electric noises, and increasing the reliability. Design methods of the generator use a development tools with Maxwell 2D and Simplorer. There are designed drawing of manufactured frames of the SPMSG. A amplitude and waveform of the generated electromotive force, FFT analysis of harmonics within output voltages, and reviewing a experiment results are shown by variable output frequency. We are presenting a design and manufacture methods for the SPMSG.