• Korean Journal of Applied Biomechanics
• /
• v.17 no.2
• /
• pp.103-112
• /
• 2007

The purpose of this study was to investigate the kinematic characteristics during rising from a chair. Six stroke patients and three healthy subjects participated in the study. Three dimensional kinematic analysis was used to get the duration, center of mass, and lower extremity angle. The stroke patients performed longer duration(0.28sec) than the healthy subjects in rising from a chair. The stroke subjects stayed longer time than the healthy subjects did in phase 2(From the initiation of knee extension to the reversal of trunk flexion to trunk extension)(t=-1.01, p=.04). The healthy subjects showed longer time than the stroke subjects in phase 3(from the reversal of trunk motion to extension to full standing position). The healthy subjects displayed larger value of center of mass in anterioposterior direction than stroke subjects(t=5.79, p=0.05). The center of mass in the mediolateral direction did not change during the completion of movement. However, the center of mass in the anterioposterior direction began to increase throughout the completion of movement. The center of mass in the vertical direction increased extensively in phase 3. The significant difference was not found in the maximum dorsiflexion in ankle, the initiation angle of knee, and the minimum angle of hip between stroke and healthy subjects. Even though statistical results did not show any significant angle difference in the lower extremity, the patterns of the change in the knee and hip angle during rising from a chair were different. The stroke subjects showed smaller angle of knee extension than the healthy subjects in phase 3. The stroke subjects flexed their trunk more than the healthy subjects in phase 2.

• Structural Engineering and Mechanics
• /
• v.5 no.4
• /
• pp.399-414
• /
• 1997

This paper presents an investigation into the seismic response characteristics of a proposed ligh-weight pedestrian cable-stayed bridge made entirely from Glass Fiber Reinforced Plastics(GFRP). The study employs three dimensional finite element models to study and compare the dynamic characteristics and the seismic response of the GFRP bridge to a conventional Steel-Concrete (SC) cable-stayed bridge alternative. The two bridges were subjected to three synthetic earthquakes that differ in the frequency content characteristics. The performance of the GFRP bridge was compared to that of the SC bridge by normalizing the live load and the seismic internal forces with respect to the dead load internal forces. The normalized seismically induced internal forces were compared to the normalized live load internal forces for each design alternative. The study shows that the design alternatives have different dynamic characteristics. The light GFRP alternative has more flexible deck motion in the lateral direction than the heavier SC alternative. While the SC alternative has more vertical deck modes than the GFRP alternative, it has less lateral deck modes than the GFRP alternative in the studied frequency range. The GFRP towers are more flexible in the lateral direction than the SC towers. The GFRP bridge tower attracted less normalized base shear force than the SC bridge towers. However, earthquakes, with peak acceleration of only 0.1 g, and with a variety of frequency content could induce high enough seismic internal forces at the tower bases of the GFRP cable-stayed bridge to govern the structural design of such bridge. Careful seismic analysis, design, and detailing of the tower connections are required to achieve satisfactory seismic performance of GFRP long span bridges.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.11
• /
• pp.107-118
• /
• 2008

In this study, lower extremity joint kinematics and kinetics and lumbar lordosis were investigated for two different symmetrical lifting techniques(squat and stoop) using the three-dimensional motion analysis. Twenty-six male volunteers lifted boxes weighing 5, 10 and 15kg by both squat and stoop lifting techniques. There were not significant differences in maximum lumbar joint moments between the two techniques. The hip and ankle contributed the most part of the support moments during squat lifting, and the knee flexion moment played an important role in stoop lifting. The hip, ankle and lumbar joints generated power and only the khee joint absorbed power in the squat lifting. The knee and ankle joints absorbed power, the hip and lumbar joints generated power in the stoop lifting. The bi-articular antagonist muscles' co-contraction around the knee joint during the squat lifting and the eccentric co-contraction of the gastrocnemius and semitendinosus were found to be important for straightening up during the stoop lifting. At the time of lordotic curvature appearance in the squat lifting, there were significant correlations in all three lower extremity joint moments with the lumbar joint. Differently, only the hip moment had significant correlation with the lumbar joint in the stoop lifting. In conclusion, the knee extension which is prominent kinematics during the squat tilling was produced by the contributions of the kinetic factors from the hip and ankle joints(extensor moment and power generation) and the lumbar extension which is prominent kinematics during the stoop lifting could be produced by the contributions of the knee joint kinetic factors(flexor moment, power absorption, bi-articular muscle function).

• Korean Journal of Applied Biomechanics
• /
• v.19 no.3
• /
• pp.509-517
• /
• 2009

The purpose of this study was to investigate the effective posture for air pistol shooting. Participants were 3 male athletes of shooting with at least five years of experience and another group of 3 males athletes with less than three years of experience. For the purpose, the shooting motion was analysed using three dimensional image technology. Data from each event for the two groups, competent and less competent ones, were compared to see the differences from the kinematical point of view. Time of period in competent group was longer than less competent group during the shooting posture. Displacement of center of mass and pistol about medial/lateral and antero/posterior in competent group was little than less competent group from aim to shooting. And these result were effect to the velocity. Distance and time in competent group within coaching machine were smaller than less competent group. To the result, it was appear that precision of aim in competent group was higher than less competent group.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.2
• /
• pp.123-137
• /
• 2003

This study is to present more effective starting skills through analysis of kinematic characteristics of starting motions in 300m Time Trials of Inline Skating. To achieve this goal, 6 athletes, 3 in the national team and 3 in business teams were chosen and their starting motions were examined with three-dimensional image analyses. The results of analyses in regard of positions and speed of the bodily center and angles, angular velocity, and linear velocity of articulations of lower limbs by sections of starting motions are as follows: In case of the central position, though it is effective to reduce the air resistance by lowering the upper part of the body maximumly, it is reasonable to accelerate by raising the upper part of the body to some degree for the running posture at the lower speed in the starting section. In the starting section, it is efficient to minimize the period of time in touching the ground. for this, it is necessary to train for taking motions without slippage while touching the ground. While 3 athletes in business teams kicked the ground as running right after the starting, the others in the national team slid on the ground. As the number of steps increased, the movable speed changed quickly. Thus the movable speed of athletes in the national team indicated big differences in two to three steps. If these factors are well supported, the push-away starting method might be better than the running starting method in terms of improvement of records.

• PNF and Movement
• /
• v.18 no.3
• /
• pp.305-313
• /
• 2020

Purpose: The aim of this study was to investigate the relationship between a functional evaluation model and the Fugl-Meyer assessment (FMA) scale in evaluating the upper extremities of stroke patients Methods: Thirty-eight stroke patients were evaluated using the FMA and performed reaching and grasping motions using a three-dimensional motion analysis (Qquas 1 series, Qualisys AB, Sweden). The participants sat on a chair with a backrest. The position of the cup was located at a distance of 80% to the front arm length. The markers were attached to the sternum, acromion, elbow lateral epicondyle, ulnar styloid process, three metacarpal heads, and the distal phalanges of the thumb and index finger. The variables of the correlation between the functional evaluation model and the FMA scale were analyzed. Multiple regression (stepwise) was used to investigate the effect of the kinematic variables. Results: A significant negative correlation was found between the movement time (p < 0.05), movement unit (p < 0.05), and trunk displacement values (p < 0.05) in the FMA total scores, while a positive correlation was found between the peak velocity (p < 0.05) and maximum grip aperture values (p < 0.05). As a result of the multiple regression analysis, the most significant factor was the movement unit, followed by the general movement assessment and trunk displacement. The explained FMA total score value was 62%. Conclusion: This study presents a new functional evaluation model for assessing the reaching and grasping ability of stroke patients. The factors of the proposed functional evaluation model showed significant correlations with the FMA scale scores and confirmed that the new functional evaluation model explained the FMA by 67%. This suggests a new functional evaluation model for reaching and grasping stroke patients.

• Journal of Biomedical Engineering Research
• /
• v.31 no.1
• /
• pp.74-80
• /
• 2010

This paper presents the three dimensional gait analysis of the patients with osteoarticular knee allograft reconstruction. The gait analysis has been performed in some medical fields such as orthopedics and neurosurgery for the purpose of the rehabilitation of patients. However, to the author's knowledge, the analysis of gait for the patients with osteoarticular knee allograft reconstruction caused by tumor has not been reported. In this work, In this work, we confirmed the validity of this method by analyzing 50 samples per one gait cycle obtained from each of 3 patients and 3 normal persons. The motion capture was performed using six infrared cameras. The symmetry and stability of the gait patterns are investigated (patients' r=0.39, p<0.05, normal persons' r=0.65, p<0.05) respectively using the correlation coefficients and the standard deviations of the joint angles of the left and right legs. It also would be applied to the comparison analysis where artificial knee joint is transplanted.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.18 no.3
• /
• pp.239-247
• /
• 2008

Low back disorders (LBDs) have been the most common musculoskeletal problem in Korean workplaces. It affects many workers, and is associated with high costs to many companies as well as the individual, which can negatively influence even the quality of life of workers. The _evaluation of low back disorder risk associated with manual materials handling tasks can be performed using variety of ergonomic assessment tools such as National Institute for Occupational Safety and Health (NIOSH) Revised Lifting Equation (NLE), the Washington Administrative Code 296-62-0517 (WAC), the Snook Tables etc. But most of these tools provide limited information for choosing the most appropriate assessment method for a particular job and in finding out advantage and disadvantage of the methods, and few have been assessed for their predictive ability. The focus of this study was to _evaluate spinal loads in real time with lifting and pulling heavy cow leathers in variety of postures. Data for estimating mean trunk motions were collected as employees did their work at the job site, using the Lumbar Motion Monitor. Eight employees (2 males, 6 females) were selected in this study, in which the load weight and the vertical start and destination heights of the activity remained constant throughout the task. Variance components (three dimensional spaces) of mean trunk kinematic measures were estimated in a hierarchical design. They were used to compute velocity and acceleration of multiple employees performing the same task and to repetitive movements within a task. Therefore, a results of this study could be used as a quantitative, objective measure to design the workplace so that the risk of occupationally related low back disorder should be minimized.

• Journal of Energy Engineering
• /
• v.22 no.4
• /
• pp.399-405
• /
• 2013

The gas motion inside the engine cylinder plays a very important role in determining the thermal efficiency of an internal combustion engine. A precise information of in-cylinder three dimensional complex gas motion is crucial in optimizing engine design. Homogeneous charge compression ignition (HCCI) engine is a combustion concept, which is a hybrid between Otto and Diesel engine. The turbulent diffusion leads to increased rates of momentum, heat and mass transfer. The in-cylinder turbulence flow was found to affect the present HCCI combustion mainly through its influence on the wall heat transfer. This study investigates the effect of piston geometry shape on the turbulent flow characteristics of in-cylinder from the numerical analysis using the LES model and the results obtained can offer guidelines of the combustion geometries for better combustion process and engine performance.

• Journal of the Korean Society of Physical Medicine
• /
• v.9 no.1
• /
• pp.93-99
• /
• 2014

PURPOSE: The purpose of this study was to compare three dimensional displacement and peak velocity of the center of mass (COM) during obstacle crossing in young and older adults. METHODS: 10 young adults (6 males/4 females, $24.6{\pm}1.9$ years, age range: 22.0-26.9) and 10 older adults (1 male/9 females, $76.9{\pm}5.1$ years, age range: 65.2-81.2) participated in the study. Both groups crossed an obstacle, which is 10% of leg length, and COM was measured using motion analysis system. Independent t-test was used to find significant differences between two groups. RESULTS: The older adults showed significantly greater and faster COM displacement and peak velocity in mediolateral (M-L) direction as compared with young adults (p<.01 and p<.001 respectively). However, the young adults showed significantly greater and faster COM displacement and peak velocity in anteroposterior (A-P) direction as compared with older adults (p<.05 and p<.001 respectively). Furthermore, the young adults showed faster peak velocity of COM in vertical direction as compared with older adults (p<.001). However, no significant difference was found in the COM displacement in vertical direction between two groups. CONCLUSION: Greater and faster COM displacement and peak velocity in M-L direction in older adults were due to compensatory adjustment for appropriate contact on base of support of swing limb. Thus, the motion of the COM in M-L direction may be a crucial factor to identify risk of falls in older adults.