• 한국해양환경ㆍ에너지학회지
• /
• 제13권1호
• /
• pp.47-52
• /
• 2010

근해에 설치되는 3차원 착저식 OWC 파력발전 챔버 구조물의 파 에너지 흡수효율과 구조물에 작용하는 1차 및 시간 평균 2차 파랑하중의 해석기법을 보였다. 쌍동형 OWC챔버 내부의 변동압력을 각 챔버의 내부 자유표면 경계조건에 도입하였으며 챔버 내부는 Rankine, 외부는 유한수심 3차원 자유표면 Green함수에 연계된 하이브리드 적분방정식을 사용하여 포텐셜 유동을 해석하였다. 수치실험 결과로서 3차원 착저식 OWC 파일럿 플랜트의 파력발전 1차변환 효율과 구조물에 작용하는 반복 및 지속적인 파랑하중을 제시하였다.

• 대한조선학회논문집
• /
• 제47권3호
• /
• pp.291-305
• /
• 2010

A three-dimensional time-domain calculation method is of crucial importance in prediction of the motions and wave loads of a ship advancing in a severe irregular sea. The exact solution of the free surface wave-ship interaction problem is very complicated because of the essentially nonlinear boundary conditions. In this paper, an approximate body nonlinear approach based on the three-dimensional time-domain forward-speed free-surface Green function has been presented. The Froude-Krylov force and the hydrostatic restoring force are calculated over the instantaneous wetted surface of the ship while the forces due to the radiation and scattering potentials over the mean wetted surface. The time-domain radiation and scattering potentials have been obtained from a time invariant kernel of integral equations for the potentials which are discretized according to the second-order boundary element method (Hong and Hong 2008). The diffraction impulse-response functions of the Wigley seakeeping model advancing in transient head waves at various Froude numbers have been presented. A simulation of coupled heave-pitch motion of a long rectangular barge advancing in regular head waves of large amplitude has been carried out. Comparisons between the linear and the approximate body nonlinear numerical results of motions and wave loads of the barge at a nonzero Froude number have been made.

• 한국해양공학회지
• /
• 제20권3호
• /
• pp.24-36
• /
• 2006

This paper investigates wave loads of ships that suffer sinkage due to flood in a compartment caused by damage on the side of the hull. By analyzing ships with various sizesof damage opening, the influence of opening size on ship response is investigated. The motion of the damaged ship is analyzed by using the boundary element method, based on three-dimensional potential theory, considering hydrodynamic pressure in the flooded compartments. The shear forces, bending moments and torsional moments are calculated by the direct integration of the three dimensional hydrodynamic pressure on the outer and inner hulls. A RORO passenger ship with length of 174.8 m is considered in the numerical example, and results for wave loads are discussed.

• 한국해양공학회지
• /
• 제13권4호통권35호
• /
• pp.132-142
• /
• 1999

A three-dimensional linearised potential theory is presented for the prediction of motions and dynamic structural responses of twin-hull ships travelling with forward speed in regular waves. Comparisons between theoretical and experimental results are shown for the motion responses and lateral wave loads of an ASR(anti-submarine rescue) catamaran. In general, good agreement between theory and experiment is found except for some discrepancies that are believed to be caused by neglect of forward speed effects on free surface.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.599-604
• /
• 2000

In order to study unsteady aerodynamic loads on high speed trains passing by each other at the speed of 350km/h, three-dimensional flow fields around trains during the crossing event are numerically simulated using the three-dimensional Euler equations. The Roe's FDS with MUSCL interpolation is employed to simulate wave phenomena properly. An efficient moving grid system based on domain decomposition techniques is developed to analyze the unsteady flow field induced by the restricted motion of a train on a rail. The numerical simulations of the trains passing by on the double-track are carried out to study the effect of the train nose-shape, the train length and the existence of tunnel when the crossing event occur. Unsteady aerodynamic loads side force and drag force-acting on the train during the crossing are numerically predicted and anlayzed. It is found that the strength of the side force mainly depends on the nose-shape, and that of drag force on tunnel existence. And it is observed that the push-pull like impulsive force successively acts on each car and acts in different directions between the neighborhood cars. The maximum change of the impulsive force reaches about 3 tons. These aerodynamic force data are absolutely necessary for the evaluation of the stability of the high speed multi-car train. The results also indicate the effectiveness of the present numerical method for the simulation of unsteady flow field induced by the bodies in the relative motion.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.135-140
• /
• 2006

Numerical computations are made to predict wave loads on a vertical cylinder in an extreme wave. To generate the extreme wave, a frequency-focused unidirectional wave is adopted in three-dimensional numerical wave tank. The mathematical formulation is wide in the scope of the potential theory with fully nonlinear free surface conditions. As a numerical method, finite element method based on variational principle is applied. Comparisons between the present numerical results and the previous computation data. show a good agreement.

• Geomechanics and Engineering
• /
• 제19권3호
• /
• pp.241-254
• /
• 2019

A finite element approach is presented to examine ground vibration characteristics under various moving loads in a homogeneous half-space. Four loading modes including single load, double load, four-load, and twenty-load were simulated in a finite element analysis to observe their influence on ground vibrations. Four load moving speeds of 60, 80, 100, and 120 m/s were adopted to investigate the influence of train speed to the ground vibrations. The results demonstrated that the loading mode in a finite element analysis is reliable for train-induced vibration simulations. Additionally, a three-dimensional finite element model (3D FEM) was developed to investigate the dynamic responses of a track-ballast-embankment-ground system subjected to moving loads induced by high-speed trains. Results showed that vibration attenuations and breaks exist in the simulated wave fronts transiting through different medium materials. These tendencies are a result of the difference in the Rayleigh wave speeds of the medium materials relative to the speed of the moving train. The vibration waves induced by train loading were greatly influenced by the weakening effect of sloping surfaces on the ballast and embankment. Moreover, these tendencies were significant when the vibration waves are at medium and high frequency levels. The vibration waves reflected by the sloping surface were trapped and dissipated within the track-ballast-embankment-ground system. Thus, the vibration amplitude outside the embankment was significantly reduced.

• 대한기계학회논문집A
• /
• 제37권2호
• /
• pp.257-263
• /
• 2013

본 논문에서는 파력에너지를 전기에너지로 변환시키는 파력발전기를 다물체 동역학을 이용하여 모델링 하였으며, 계류시스템이 부유식 파력발전기에 미치는 영향에 대해서 분석하였다. 계류시스템이 파력발전기에 미치는 영향을 줄이기 위한 연구가 많이 이루어지고 있다. 구속방정식과 힘 요소를 이용하여 다물체 시스템을 모델링 하였으며, 3 차원 파랑하중을 적용하여 부유체에 작용하는 파력을 모델링 하였다. 파력발전기의 거동과 발전량을 분석하기 의해 상용 다물체 동역학 해석프로그램인 MSC/ADAMS 를 이용하였다. 계류시스템이 있을 때와 없을 때의 결과를 비교하였고, 특히 극한 파랑하중이 작용했을 때의 시뮬레이션을 통해 파력발전기의 안정성을 평가하였다.

• 한국전산구조공학회논문집
• /
• 제33권5호
• /
• pp.287-296
• /
• 2020

본 연구에서는 2D 조파수조를 통해 수행된 모형시험결과를 기반으로 원형실린더에 분포하는 파랑충격압력을 시간에 따라 계측하고 이를 CFD해석 결과와 비교하였다. 전산유체역학 해석을 통해 파랑충격력에 직접평가법에 관한 효용성을 확인할 수 있었고, 실험으로부터 구한 파랑충격 시계열 데이터를 그대로 원형단면을 갖는 실제 해양구조물의 부재에 적용하였다. 실린더에 분포하는 변위 및 응력의 특성과 특이점이 바뀌는 것을 확인하였고 실제 시계열을 적용하는 것이 해양구조물의 강도평가를 보다 정확하게 평가할 수 있음을 확인할 수 있었다. 또한, 선수부에 요구되는 외판의 최소선급규정에 따른 두께 경험식들을 분석하여 적용하고자 하였다. 동일한 재료 물성치를 갖는 강재에 관해 선수외판에 요구되는 구조물의 최소두께와 원형단면 부재에 요구되는 최소두께를 비교·분석하였고 이를 통해 NORSOK standard에 제시되어 있는 구조물의 손상기준을 활용하여 허용 두께치를 추정하고자 하였다. 특히 해양구조물의 갑판충격력(wave in deck)의 경우 이와 관련된 경험식이나 최소두께 요구사항들이 정립되어 있지 않기 때문에 본 연구를 통해 파랑충격력에 따라 요구되는 판재의 최소두께를 제안하고자 하였다.

• 한국해안해양공학회:학술대회논문집
• /
• 한국해안해양공학회 2009년도 발표 논문집 제18권
• /
• pp.196-199
• /
• 2009