• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.10a
• /
• pp.195-200
• /
• 2007

We analyzed a sequence of multi-stage automatic cold forging processes composed of four axisymmetric processes followed by a non-axisymmetric process using rigid-plastic finite element based forging simulators. The forging sequence selected for an example involves a piercing process and a heading process accompanying folding or overlapping, which all make it difficult to simulate the processes. To reduce computational time and to enhance the solution reliability, only the non-symmetric process was analyzed by the three-dimensional approach after the axisymmetric processes were analyzed by the two-dimensional approach. It has been emphsized that this capability is very helpful in simulating the multi-stage automatic forging processes which are next to axisymmetric.

• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.229-230
• /
• 2013

The conventional Three-Stage electronic ballast is stable, but Two-Stage electronic ballast has been researching because of efficiency. Three-Stage electronic ballast is consisted of PFC circuit, buck converter, and inverter circuit, but Two-stage is consisted of PFC circuit, Buck-Inverter full bridge circuit. The Buck-Inverter full bridge inverter consists of two half bridge inverters for low frequency switching, and high frequency switching. In the case of street lamp it is far from a lamp to a ballast, the conventional pulsed high voltage ignitor can not turn on the HID lamps because of reduction of ignition voltage. Therefore, it needs to do the research on a resonant ignition to turn on the HID lamps. Therefore, in the Two-Stage electronic ballast which has the resonant tank for ignition, the transient resonant current because of low frequency changing is analyzed, the novel algorithm is proposed to resuce the transient current.

• Proceedings of the KIEE Conference
• /
• 1998.11c
• /
• pp.1041-1045
• /
• 1998

This paper presents the control design of a three-module boost converter with a two-stage output filter. An advanced three-loop control scheme is employed to the control design in order to obtain good dynamic performance of the converter at the presence of the secondary filter stage. The paper presents the control design, dynamic analysis and performance improvement with the three-loop control.

• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.693-697
• /
• 1998

This paper presents the control design of a three-module boost converter with a two-stage output filter. An advanced three-loop control scheme is employed to the control design in order to obtain good dynamic performance of the converter at the presence of the secondary filter stage. The paper presents the control design, dynamic analysis and performance improvement with the three-loop control.

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.373-377
• /
• 1998

This paper presents the control design of a three-module boost converter with a two-stage output filter. An advanced three-loop control scheme is employed to the control design in order to obtain good dynamic performance of the converter at the presence of the secondary filter stage. The paper presents the control design, dynamic analysis and performance improvement with the three-loop control.

• Communications for Statistical Applications and Methods
• /
• v.18 no.4
• /
• pp.423-431
• /
• 2011

For procuring more sensitive information and estimating stratum target population proportion as well as an overall one form a sensitive population composed of several strata we suggest a two-stage stratified unrelated question model that uses stratified random sampling instead of simple random sampling in the two-stage unrelated question model by Kim et al. (1992) and extend it to the three-stage stratified unrelated question model. We also deal with the proportional and optimal allocation problems in each suggested model, compare the relative efficiency of the suggested two models, and show that the three-stage stratified unrelated question model is more efficient than the two-stage one in view of the variance.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.28 no.4
• /
• pp.365-370
• /
• 2014

The intrinsic concepts of the three yin and three yang diseases in is unclear yet in spite of considerable controversy. In order to answer these problems, the structures of pathological transmission and anatomical terms used in the text were analyzed first. On these structural bases, the theoretical background and differential therapeutic principles of three yin and three yang disease classification. The organic structures frequently used in the text were heart, stomach, pancreas, blood chamber and urinary bladder, and the important regions in the transmission were chest, flank, epigastrium, abdomen, hypogastrium, groin on the other hand. When a host is invaded by extrinsic pathogen, an affinity is formed between the two based on the similarity of epidermal density condition and nutrient-defense features and existing disorders in the body. And then the symptoms show in 3 stages with 6 patterns in the general infective diseases. The initial stage is the period that the syndrome is limited in the external flesh area, and it mainly corresponds with taiyang bing besides the other exterior patterns of 3 yang and 2 yin bing. The middle stage is to the climax after the end of initial stage and it corresponds with mainly yangming bing including shaoyang and taiyin bing. In the terminal stage, the host gradually falls into exhaustive step or recovery phase, corresponding with shaoyin and jueyin bing. Conclusively, these dual meanings of three yang and yin should be a first guide and principle of treatment against various infective diseases.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2003.05a
• /
• pp.226-229
• /
• 2003

This study presents an intelligent CRM (Customer Relationship Management) application methodology for supplier companies in Business-to-Business environments. The intelligent methodology proposed in this study consists of three-stage-procedures such as static CRM application stage, adaptive CRM application stage and external CRM application stage.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.3327-3335
• /
• 2014

In this study, comparison works have been performed for single-stage and multi-stage refrigeration cycle using propane as a refrigerant in order to cool down the natural gas stream. A comparative analysis has been performed for a single, two, three and four stage refrigeration cycle using propane as a refrigerant for cooling the natural gas stream. For the simulation, natural gas feedstock properties supplied by KOGAS were utilized and Peng-Robinson equation of state model was used. As the number of compression stages increase, the condenser heat duty is decreased. The refrigeration heat duty for a four-stage refrigeration cycle is decreased by 20.36% compared to that for a single-stage refrigeration cycle. Moreover, the total refrigerant circulation rate for a four-stage refrigeration system is was reduced by 14.53% compared to the single stage refrigeration cycle. The total compression power for a four-stage compression was reduced by 41.61% compared to the single stage compression.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.23 no.6
• /
• pp.424-432
• /
• 2018

This study presents a single-phase single-stage three-level AC/DC converter with a wide controllable output voltage. The proposed AC/DC converter is designed to extend the application of e-mobility, such as electric vehicles. The single-stage converter integrates a PFC converter and a three-level DC/DC converter, operates at a fixed frequency, and provides a wide controllable output voltage (approximately 200-430Vdc) with high efficiencies over a wide load range. In addition, the input boost inductors operate in a discontinuous mode to improve the input power factor. The switching devices operate with ZVS, and the converter's THD is small, especially at full load. The feasibility of the proposed converter is verified by the experimental results of a 1.5 kW prototype.