• Journal of Animal Science and Technology
• /
• v.65 no.5
• /
• pp.939-950
• /
• 2023

This study was conducted to assess the impact of growing condition variables on alfalfa (Medicago sativa L.) productivity. A total of 197 alfalfa yield results were acquired from the alfalfa field trials conducted by the South Korean National Agricultural Cooperative Federation or Rural Development Administration between 1983 and 2008. The corresponding climate and soil data were collected from the database of the Korean Meteorological Administration. Twenty-three growing condition variables were developed as explaining variables for alfalfa forage biomass production. Among them, twelve variables were chosen based on the significance of the partial-correlation coefficients or potential agricultural values. The selected partial correlation coefficients between the variables and alfalfa forage biomass ranged from -0.021 to 0.696. The influence of the selected twelve variables on yearly alfalfa production was summarized into three dominant factors through factor analysis. Along with the accumulated temperature variables, the loading scores of the daily mean temperature higher than 25℃ were over 0.88 in factor 1. The sunshine duration at temperature between 0℃-25℃ was 0.939 in factor 2. Precipitation days were 0.82, which was the greatest in factor 3. Stepwise regression applied with the three dominant factors resulted in the coefficients of factors 1, 2, and 3 for 0.633, 0.485, and 0.115, respectively, and the R-square of the model was 0.602. The environmental conditions limiting alfalfa growth, such as daily temperature higher than 25℃ or daily mean temperature affected annual alfalfa production most substantially among the growing condition variables. Therefore, future cultivar selection should consider the capability of alfalfa to be tolerant to extreme summer weather along with biomass production potential.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.7 s.250
• /
• pp.757-764
• /
• 2006

Isothermal cyclic stress-strain deformation and thermomechanical deformation (TMD) of 429EM stainless steel were analyzed using a rheological model employing a bi-linear model. The proposed model was composed of three parameters: elastic modulus, yield stress and tangent modulus. Monotonic stress-strain curves at various temperatures were used to construct the model. The yield stress in the model was nearly same as 0.2% offset yield stress. Hardening relation factor, m, was proposed to relate cyclic hardening to kinematic hardening. Isothermal cyclic stress-strain deformation could be described well by the proposed model. The model was extended to describe TMD. The results revealed that the hi-linear thermomechanical model overestimates the experimental data under both in-phase and out-of-phase conditions in the temperature range of $350-500^{\circ}C$ and it was due to the enhanced dynamic recovery effect.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.9
• /
• pp.467-475
• /
• 2020

The study aims to investigate factors affecting enterprise's satisfaction and loyalty toward the Social Security's online public services, looking at the case of Thanh Hoa province, Vietnam. This study employs samples with 216 enterprises that use online public system of Thanh Hoa province's Social Security. The research model is closely linked to the SERVQUAL model developed by Parasuraman, Zeithaml and Berry (1988). We propose 23 scales that constitute the quality of service, three scales that constitute Customer Satisfaction and three components that constitute Customer Loyalty. This study use the tool of Exploratory Factor Analysis (EFA), Cronbach's Alpha test, Confirm Factor Analysis (CFA) and Structural Equation Modeling (SEM) in order to address the question of satisfaction and loyalty. The result shows that the factor with the most impact is Reliability, next is Capacity of staffs, Tangibles, Attitude of staffs, and the least impacting factor is Empathy; moreover, the results also show that Satisfaction has a strong impact on Customer Loyalty. The findings of this study suggest that Thanh Hoa province's Social Security should: (i) strengthen the reliability of online service system; (ii) build capacity for staffs; (iii) develop the responsiveness of electronic transactions systems; and (iv) improve the empathy of staffs.

• Journal of Construction Engineering and Project Management
• /
• v.1 no.1
• /
• pp.25-30
• /
• 2011

With a focus on different aspects of PMIS in construction projects, various sets of critical success factors (CSFs) have been suggested in the literature such as IS Success Model by various researchers. It is crucial to explore the relative importance and groupings of these factors. This paper aims to identify CSFs associated with Project Management Information System (PMIS) in construction projects, and explore their ranking and underlying relationship. CSFs for PMIS identified through a literature review, and consolidated by interviews and pilot studies with professionals in construction industry. A questionnaire instrument was sent out to experienced users (Construction Manager and Constructor) in Korea, and 253 completed questionnaires were retrieved. To increase the generalizability of the results, the respondents were spread across construction site. Using factor analysis and considering the high importance of the factor, CSFs were grouped into three dimensions. All these three groupings and their relationship were included in a framework for successful PMIS in construction projects. These findings help to clarify what the high prioritized factors are, and could also be used as an assessment tool to evaluate the performance of PMIS and thus help to identify areas for improvement.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.2
• /
• pp.65-73
• /
• 2020

The purpose of this paper is to ascertain the key factors affecting tax compliance among Vietnamese firms in Vietnam. We employ both qualitative and quantitative research methods. Qualitative research has been carried out through focus group discussions with ten chief accountants and tax officers. Quantitative research has been conducted through interviews with 200 firms (chief accountants or financial directors) in Vietnam. Analysis of the model includes the following stages: (i) Cronbach's test for reliability of the scale, (ii) exploratory factor analysis (EFA), (iii) confirmatory factor analysis (CFA), and (iv) structural equation model (SEM). The results of the research show that voluntary tax compliance is directly affected by the three factors of audit probability, corporate reputation and business ownership. The probability of audit and severity of sanctions have the strongest impact on tax compliance. Therefore, the tax authorities need to strengthen the inspection of tax declarations, tax payments and tax refunds of firms. The paper confirms that enforced tax compliance is directly affected by the three factors of audit probability, sanction severity and social norms. Voluntary compliance and compulsory compliance have an effect on tax compliance, though voluntary compliance has a more powerful impact.

• Radiation Oncology Journal
• /
• v.36 no.3
• /
• pp.248-253
• /
• 2018

Radiation protection in the scrotum to reduce the risk of genetic effect in the future is very important. This study aimed to measure the scrotal dose outside the treatment fields by using the radio-photoluminescence glass dosimeter (RPLGD). The characteristics of RPLGD model GD-302M were studied. Scattered dose to scrotum was measured in one liposarcoma case with the prescribed dose of 60 Gy. RPLGDs were placed in three different locations: one RPLGD was positioned at the posterior area which closer to the scrotum, and the other two RPLGDs were placed between the penis and the scrotum. Three RPLGDs were employed in each location. The scattered doses were measured in every fraction during the whole course of treatment. The entire number of 100 RPLGDs showed the uniformity within ±2%. The signal from RPLGD demonstrated linear proportion to the radiation dose (r = 0.999). The relative energy response correction factor was 1.05. The average scrotal dose was 4.1 ± 0.9 cGy per fraction. The results presented a wide range since there was a high uncertainty during RPLGD placement. The total scrotal dose for the whole course of treatment was 101.9 cGy (1.7% of the prescribed dose). The RPLGD model GD-302M could be used to measure scattered dose after applying the relative energy correction factor.

• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.498-503
• /
• 2011

With a focus on different aspects of PMIS in construction projects, various sets of critical success factors (CSFs) have been suggested in the literature such as IS Success Model by various researchers. It is crucial to explore the relative importance and groupings of these factors. This paper aims to identify CSFs associated with Project Management Information System (PMIS) in construction projects, and explore their ranking and underlying relationship. CSFs for PMIS identified through a literature review, and consolidated by interviews and pilot studies with professionals in construction industry. A questionnaire instrument was sent out to experienced users (Construction Manager and Constructor) in Korea, and 253 completed questionnaires were retrieved. To increase the generalizability of the results, the respondents were spread across construction site. Using factor analysis and considering the high importance of the factor, CSFs were grouped into three dimensions. All these three groupings and their relationship were included in a framework for successful PMIS in construction projects. These findings help to clarify what the high prioritized factors are, and could also be used as an assessment tool to evaluate the performance of PMIS and thus help to identify areas for improvement.

• Journal of Korean Academy of Nursing
• /
• v.32 no.4
• /
• pp.506-518
• /
• 2002

This study was performed to measure the nursing service quality being used SERVQUAL model and satisfaction that the admitted patients perceived. Method: The questionnaire founded on the SERVQUAL was developed and distributed to 300 patients at the three general hospitals in three provincial city, Korea. For data analysis, Cronbach's α, frequencies, percentages, paired t-test, Pearson Correlation Coefficient were used. Result: In expectation, patients most highly perceived the assurance factor that was one among the 5 factors being constituted nursing service. In performance, patients most highly perceived the responsiveness factor. The performance degrees of the 5 factors and 20 attributes being constituted nursing service did not exceed the expectation degree of those. So the calculated figures for nursing service quality of the three subjected hospitals were all minus. In relation of the patients' demographics and nursing service characteristics to their general satisfaction, patients' sex, age, income and the all factors and attributes of nursing service had relation to their general satisfaction. Conclusion: It could be concluded that the nursing service quality of the three subjected hospitals was poor and the patients' demographic and nursing service characteristics had relation to their general satisfaction.

• Journal of Hydrospace Technology
• /
• v.1 no.1
• /
• pp.125-145
• /
• 1995

In this paper, three kinds of the existing idealized structural units, namely the idealized beam-column units the idealized unstiffened plate unit and the idealized stiffened plate unit are expanded to deal with the excessive tension-deformation effects. A simplified mechanical model far the stress-strain relationship of steel members under tensile load is suggested. The 1/3-scale hull model for a leander class frigate under sagging moment tested by Dow is analyzed, and it is shown that the excessive tension-deformation is a significant factor affecting the progressive collapse behavior, particularly in the post-collapse range.

• Computational Structural Engineering
• /
• v.6 no.4
• /
• pp.57-66
• /
• 1993

The p-version crack model based on integrals of Legendre polynomial and virtual crack extension method is proposed with its potential for application to stress intensity factor computations in linear elastic fracture mechanics. The main advantage of this model is that the data preparation effort is minimal because only a small number of elements are used and high accuracy and the rapid convergence can be achieved in the vicinity of crack tip. There are two important findings from this study. Firstly, the limit value, the strain energy of the exact solution, can be estimated with successive three p-version approximations by ascertaining that the approximations enter the asymptotic range. Secondly, the rate of convergence of p-version model is almost twice that of h-version model on the basis of uniform or quasiuniform mesh refinement for the cracked panel problem subjected to tension.