• 제목/요약/키워드: Three factor model

검색결과 1,664건 처리시간 0.033초

색채와 광원이 쇼윈도 전시효과에 미치는 영향 (A Experimental Study on the Influence of the Display Effect by Color and Light Source in Show Window)

  • 이정옥;김현지
    • 한국조명전기설비학회지:조명전기설비
    • /
    • 제9권4호
    • /
    • pp.49-54
    • /
    • 1995
  • This paper is an experimental study on the influence of the demonstration effect by color and light source in show window. This experiment used semantic differentical method in model show window of actual size. The important outcomes of this study are summarized below. 1. In the result by factor analysis, three factors are classified. They are diversity, emotion, lightness. 2. In the study on the influence by light source, incandescence lamp is the most effective light source in every items. 3. In the result of the study on the influence by color source, according to each factor bring out following result ; Green is the most effective in diversity factor and ligthness factor. Yellow is the most effective in emotion factor.

  • PDF

원심압축기 임펠러의 미끄럼계수 변화에 관한 수치연구 (A Numerical Study on Slip Factor Variations in Centrifugal Compressor Impellers)

  • 오종식
    • 한국유체기계학회 논문집
    • /
    • 제2권3호
    • /
    • pp.17-23
    • /
    • 1999
  • In the present numerical analysis, investigation of the effect of blade loadings from design shape on the slip factor variation was studied. Both the Eckardt radial bladed impeller and the backswept impeller were analyzed. In addition, a new design of the blade profile was arbitrarily attempted to generate a center-loading pattern in the original backswept impeller. Three dimensional compressible Navier-Stokes flow analysis with the Baldwin-Lomax turbulence model was applied to get the numerical slip factor at each impeller exit plane using the mass-averaging technique. The numerical slip (actors are in good agreement with the experimental ones and the Wiesner's slip factors deviate further from the numerical and experimental ones in both backswept impellers. Deviation angles and meridional channel loadings are found in no relation with the trend of change of the slip factor. Blade-to-blade loadings in midspan location are, however, found to have a direct relationship, especially at the sections where maximum loadings we to be expected. That information can be utilized in establishing an improved expression for slip factors in the future.

  • PDF

구조물의 모달해석에 관한 연구 (Modal Analysis of Structures)

  • 김홍진;박제우;황재승
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2008년도 춘계학술대회논문집
    • /
    • pp.665-668
    • /
    • 2008
  • The load distribution to each mode of a structure under seismic loading depends on the modal participation factor. The factor of an idealized analytical model, however, is different to the actual one due to modeling and construction error. Therefore, there exist limits on the estimation of actual behavior. In this study, an identification procedure for participation factor based on vibration test is proposed. The procedure has an advantage that the mode shape vector can also be estimated directly from the participation factor. The numerical simulation using a three story building is performed to evaluate the proposed procedure.

  • PDF

Application of inverse reliability method to estimation of flutter safety factors of suspension bridges

  • Cheng, Jin;Dong, Fenghui
    • Wind and Structures
    • /
    • 제24권3호
    • /
    • pp.249-265
    • /
    • 2017
  • An efficient and accurate algorithm is proposed to estimate flutter safety factor of suspension bridges satisfying prescribed reliability levels. Uncertainties which arise from the basic wind speed at the bridge deck location, critical flutter velocity, the wind conversion factor from a scaled model to the prototype structure and the gust speed factor are incorporated. The proposed algorithm integrates the concepts of the inverse reliability method and the calculation method of the critical flutter velocity of suspension bridges. The unique feature of the proposed method is that it offers a tool for flutter safety assessment of suspension bridges, when the reliability level is specified as a target to be satisfied by the designer. Accuracy and efficiency of this method with reference to three example suspension bridges is studied and numerical results validate its superiority over conventional deterministic method. Finally, the effects of various parameters on the flutter safety factor of suspension bridges are also investigated.

불안 장애에서 벡우울척도의 요인구조 (Factor Structure of the Beck Depression Inventory in Anxiety Disorder)

  • 양현주;김대호;장은영;한창우;박용천
    • 대한불안의학회지
    • /
    • 제7권1호
    • /
    • pp.16-21
    • /
    • 2011
  • Objective : Depressive symptoms often coexist with other anxiety disorder symptoms. Furthermore, an anxiety disorder that is comorbid with a depressive disorder results in more severe symptoms and a poorer outcome prognosis. To understand the construct of depressive symptoms in anxiety disorder, this study investigated the factor structure of the Beck Depression Inventory among outpatients with anxiety disorders. Methods : All data were from psychiatric department outpatients at a university-affiliated hospital. We conducted a principal component analysis using data from 194 outpatients with DSM-IV anxiety disorders and calculated goodness-of-fit-indices. Results : Exploratory factor analysis revealed a four factor structure--Cognitive-affective symptoms (Factor 1), Somatic symptoms (Factor 2), Self-reproach (Factor 3), and Hypochondriasis/indecisiveness (Factor 4)--and a 57% total variance. This four-factor model demonstrated an acceptable level of model fit, and it fit better than did a three-factor solution from the literature on depressive disorder. Conclusion : This study's results suggest a difference in the construct of self-reported depressive symptoms in anxiety disorders. These findings also support a dimensional approach to studying anxiety and depression. Further studies may benefit from including comorbid depressive disorder and its influence on anxiety disorders.

어반 아웃도어웨어에 대한 소비자 인식과 Kano 모델을 적용한 제품 만족·불만족에 대한 연구: 대학생을 중심으로 (Analysis of Consumer's Perception and Product Satisfaction·Dissatisfaction with Urban Outdoor Wear based on Kano Model: Focused on University Students)

  • 전대근;김희경;김혜란;박순지
    • 한국의류산업학회지
    • /
    • 제18권1호
    • /
    • pp.103-112
    • /
    • 2016
  • This research was designed to figure out the perception and attitude of university students toward urban outdoor wear and to provide the guidelines for product quality improvement using Kano model. A total of 270 responses were analyzed by SPSS 20.0 through frequency and factor analysis. Respondents' levels for outdoor activity & outdoor products possession being still low, steady growth in urban outdoor wear market is expected. A total of eight quality factors were identified through factor analysis; suitability, production quality, functionality, ease of care, fabric performance, portability, fashionability, and symbolism. Based on Kano model, quality factors of urban outdoor wear were categorized into three groups: one-dimensional; indifferent; and must-be quality factor. It was found that consumers were satisfied with urban outdoor wear only when it meets the needs for suitability for body types and ease of care, meaning that manufactures should be cautious not to lose these features. Being must-be quality factor, production quality(form stability, quality of subsidiary materials), and fabric performance such as colorfastness should be basically satisfied. The relative importance of each quality feature on satisfaction/dissatisfaction was investigated using CSC(customer satisfaction coefficient). Based on the CSC, every item was classified again. Attractive quality features with large CSC were shown in suitability factor. Must-be quality features with small CSC were mainly shown in functionality and fabric performance factors. These findings imply that manufactures of urban outdoor wear should not only maintain the production quality but also focus on suitability features to differentiate their product with previous products.

원자로 부수로내 혼합날개를 지나는 삼차원 열유동 해석 (Numerical Analyses of Three-Dimensinal Thermo-Fluid Flow through Mixing Vane in A Subchannel of Nuclear Reactor)

  • 최상철;김광용
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2002년도 춘계 학술대회논문집
    • /
    • pp.79-87
    • /
    • 2002
  • The present work analyzed the effect of mixing vane shape on the flow structure and heat transfer downstream of mixing vane in a subchannel of fuel assembly, by obtaining velocity and pressure fields, turbulent intensity, flow-mixing factors, heat transfer coefficient and friction factor using three-dimensional RANS analysis. NJl5, NJ25, NJ35, NJ45, which were designed by the authors, were tested to evaluate the performances in enhancing the heat transfer. Standard $\kappa-\epsilon$ model is used as a turbulence closure model, and, periodic and symmetry conditions are set as boundary conditions. The flow blockage ratio is kept constant, but the twist angle of mixing vane is changed. The results with three turbulence models( $\kappa-\epsilon$, $\kappa-\omega$, RSM) were compared with experimental data.

  • PDF

조직성숙이 6시그마의 도입성과에 미치는 영향 (Effects of Organization Maturity on the Six Sigma Performance)

  • 김혜정;김주영;유지수
    • 한국조사연구학회지:조사연구
    • /
    • 제8권1호
    • /
    • pp.1-30
    • /
    • 2007
  • 본 연구에서는 6시그마에서 기대한 성과를 얻으려면 도입과정에서 일련의 단계를 거쳐야 한다는 가정을 하였으며 특히 조직성숙이 성과에 미치는 영향을 분석하고 있다. 6시그마에서 성과를 얻는 단계를 준비단계, 수용단계, 성숙단계로 정의하여 단계적 모형을 제시하였다. 준비단계는 다시 조직변화오인, 추진시스템요인으로 세분하였고, 결과변수인 성과는 시장경쟁력성과, 조직구성원성과, 재무성과로 구분하였다. 6시그마를 도입하여 기대한 성과를 얻으려면 이 단계를 순차적으로 거쳐야 한다는 가정을 토대로 단계모형과 경쟁모형을 설정하여 구조방정식 모형을 통하여 비교 분석하였다. 기업을 표본단위로 한 판단표집(judgement sampling)을 통해 설문자료를 수집 처리하였다. 최종적인 분석에는 281 업체에서 수집된 자료가 사용되었다. 6시그마를 도입하고자 하는 기업은 준비단계, 수용단계, 그리고 성숙단계까지 도달해야만 기대한 성과를 얻을 수 있다는 것을 분석결과로 제시한다. 즉, 준비와 수용만 되었다고 큰 성과를 얻는다기보다는 성숙단계까지 가야만 성과를 제대로 얻을 수 있음을 시사하고 있다.

  • PDF

중소기업의 직무 적합성과 지각된 공정성이 자발적 이직의도에 미치는 영향 (An Effect of Job Fitness and Perceived Justice on Voluntary Turnover Intention in small firm)

  • 강성수;유우정;황용수
    • 통상정보연구
    • /
    • 제10권2호
    • /
    • pp.325-348
    • /
    • 2008
  • The purpose of this study is to find out the relationship between job fitness, organizational justice(distributive, procedural, interactional), job satisfaction, organizational trust, organizational commitment, and voluntary turnover intention in private organization such as in small fire in Korea. To identify the these relationships, the secondary data or past studies that were related with job fitness, organizational justice, job satisfaction, organizational trust, organizational commitment, voluntary turnover intention was collected and theoretically arranged. I made the theoretical proposed model to explain these relationships between the constructs, identify the operational definitions and 18 hypotheses was established, there was executed the survey of 262 in employees. Using the collected data, previous performances to confirm the construct validity and internal consistency by EFA(Exploratory Factor Analysis); i.e. factor analysis by SPSS, reliability by cronbach's a, and by the CFA(Confirmative Factor Analysis) and structural equations modelling the proposed model was tested by LISREL v. 8.52. The research came to the conclusions as follows: First, three perceived justice had the positive effect to the job satisfaction empirically. Second, procedural justice in three perceived justice only had the positive effect to the organizational trust empirically. Third, distributive justice in three perceived justice only had the positive effect to the organizational commitment empirically. Forth, job fitness had the positive effect to the organizational commitment, organizational trust, job satisfaction empirically in perspective. Fifth, I found the relationship between job satisfaction and organizational commitment, between job satisfaction and organizational trust was positive, between organizational commitment and trust. Finally, job satisfaction, organizational trust had not the positive effect directly, but indirect effect via organizational commitment was identified in voluntary turnover intention by empirical test.

  • PDF

Evaluating intra- and inter-examiner reproducibility in histometric measurement: one-wall intrabony periodontal defects in beagle dogs

  • Kim, Soo-Kyung;Choi, Eun-Hee;Lee, Jung-Seok;Kim, Tae-Gyun;Choi, Seong-Ho;Cho, Kyoo-Sung;Chai, Jung-Kiu;Kim, Chong-Kwan
    • Journal of Periodontal and Implant Science
    • /
    • 제40권4호
    • /
    • pp.172-179
    • /
    • 2010
  • Purpose: Accurate and exact measurement is an important factor for generating meaningful results in any properly designed study. If all the participating examiners are able to yield similar results, it will be possible to evaluate the objective results of the study more easily and quickly. The purpose of this study was to evaluate the intra- and inter-examiner reproducibility of histometric measurements in the intrabony periodontal defect model. Methods: One wall intrabony defects were surgically created at the distal aspect of the second and the medial aspect of the fourth mandibular premolars in the right and left jaw quadrants in twenty beagle dogs and the defect sites received the following ${\beta}$-tri calcium phosphate, growth differentiation factor-0, growth differentiation factor-100 and sham surgery. Histometric analysis was performed after 8 weeks. Histometric parameters were recorded and repeated at three months interval by three examiners. Intra- and inter-examiner reproducibility was assessed. Results: Most parameters of all the groups showed high intra- and inter-examiner reproducibility. Parameters including defect height, bone regeneration height, cementum regeneration height, and formation of junctional epithelium yielded interexaminer correlation ${\geq}0.9$. The intra-examiner reproducibility showed a high result, over 0.9. Conclusions: Histometric evaluation of the one-wall intra-alveolar periodontal defect model showed high reproducibility not only for a single given examiner but also among the three examiners.