• Journal of Biosystems Engineering
• /
• 제16권4호
• /
• pp.384-398
• /
• 1991

본 연구는 개별농가(個別農家), 영농단(營農團), 위탁영농회사(委託營農會社)의 농기계 적정투입모형(適正投入模型) 선정(選定)과 보유기종(保有機種)이나 구입희망기종((購入希望機種) 의 경제성을 분석(分析)할 수 있는 대화식(對話式) 시뮬레이션 프로그램을 개발(開發)하고자 수행(遂行)되었으며, 그 결과(結果)를 요약하면 다음과 같다. 가. 농기계(農機械)의 적정투입(適正投入) 규모(規模) 선정(選定) 경제성(經濟性) 분석(分析)의 현실(現實) 적용성(適用性)을 높이기 위하여 투입(投入) 농기계(農機械)의 부담면적(負擔面積) 결정요인(決定要因)과 비용분석을 위한 기초자료를 문헌(文獻) 및 자료조사(資料調査)를 통하여 수집하였으며 이를 기초로 하여 수학적 모델을 개발하였다. 나. 개별(個別) 농업경영체(農業經營體)(농가(農家) 또는 영농단(營農團))의 지역(地域), 기후지대별(氣候地帶別) 적기작업기간에 따른 농기계이용(農機械利用) 일수(日數), 임작업료(賃作業料) 등을, 농촌지도소에 보급된 행정전산용(行政電算用) PC를 이용(利用)하여, 프로그램 이용자(利用者)가 입력설정(入力設定)하고 투입농기계의 경제성(經濟性)을 분석(分析)할 수 있는 대화식(對話式) 프로그램을 개발(開發)하였다. 다. 개발된 프로그램을 이용하여 벼농사 일관작업(一貫作業)은 물론 각 농작업(農作業)을 분리(分離)하여 투입 농기계별로 상세(詳細)한 경제성(經濟性)을 분석(分析)할 수 있으며, 경운 정지작업 기종은 3형식, 이앙(移秧), 방제(防除), 수확작업(收穫作業) 기종은 2형식을 동시(同時)에 분석(分析)할 수 있다. 벼농사는 경운(耕耘), 정지(整地), 방제작업(防除作業)에 대하여 분석할 수 있다. 라. 프로그램 분석결과(分析結果)는 입력(入力)된 경지면적(耕地面積)에서 기계화 영농을 수행할 때 투입 농기계의 기계사용(機械使用) 과부족일수(過不足日數), 부담면적(負擔面積), 손익분기면적(損益分岐面積), 월간(月間) 고정비(固定費), ha당(當) 기계이용비(機械利用費) 등을 포함한다. 마. 손익분기면적(損益分岐面積) 기종별(機種別) 임작업료(賃作業料)를 기준으로 한 손익분기면적(損益分岐面積)은 경운(耕耘) 정지작업(整地作業)의 임작업료(賃作業料)가 100원/평 일때 경운기, 트랙터 22,25,35,38,50,74 마력은 각각(各各) 1.8, 6.7, 7.6, 9.7, 9.3, 17.5, 23.7 ha 였으며, 이앙작업(移秧作業)의 임작업료(賃作業料)가 100원/평일 때 이앙기 보행4조, 승용4,6조는 각각(各各) 2.2, 5.8, 7.9 ha, 수확작업(收穫作業)의 임작업료(賃作業料)가 130원/평 일때 바인더, 콤바인 2,3,4조는 각각(各各) 2.2, 7.2, 10.2, 15.7 ha로 나타났다.

• 지능정보연구
• /
• 제17권4호
• /
• pp.241-254
• /
• 2011

Support vector machines(SVM)은 비교적 최근에 등장한 데이터마이닝 기법이지만, 재무, CRM 등의 경영학 분야에서 많이 연구되고 있다. SVM은 인공신경망과 필적할 만큼의 예측 정확도를 보이는 사례가 많았지만, 암상자로 불리는 인공신경망 모형에 비해 구축된 예측모형의 구조를 이해하기 쉽고, 인공신경망에 비해 과도적합의 가능성이 적어서 적은 수의 데이터에서도 적용 가능하다는 장점을 가지고 있다. 하지만, 일반적인 SVM을 이용하려면, 인공신경망과 마찬가지로 여러 가지 설계요소들을 설계자가 선택하여야 하기 때문에 임의성이 높고, 국부 최적해에 수렴할 가능성도 크다. 또한, 많은 수의 데이터가 존재하는 경우에는 데이터를 분석하고 이용하는데 시간이 소요되고, 종종 잡음이 심한 데이터가 포함된 경우에는 기대하는 수준의 예측성과를 얻지 못할 가능성이 있다. 본 연구에서는 일반적인 SVM의 장점을 그대로 유지하면서, 전술한 두 가지 단점을 보완한 새로운 SVM 모형을 제안한다. 본 연구에서 제안하는 모형은 사례선택기법을 일반적인 SVM에 융합한 것으로 대용량의 데이터에서 예측에 불필요한 데이터를 선별적으로 제거하여 예측의 정확도와 속도를 제고할 수 있는 방법이다. 본 연구에서는 잡음이 많고 예측이 어려운 것으로 알려진 재무 데이터를 활용하여 제안 모형의 유용성을 확인하였다.

• 한국유체기계학회 논문집
• /
• 제11권5호
• /
• pp.50-56
• /
• 2008

Metal cutting operations involve generation of heat due to friction between the tool and the pieces. This heat needs to be carried away otherwise it creates white spots. To reduce this abnormal heat cutting fluid is used. Cutting fluid also has an important role in the lubrication of the cutting edges of machine tools and the pieces they are shaping, and in sluicing away the resulting swarf. As a cutting fluid, water is a great conductor of heat but is not stable at high temperatures, so to improve stability an emulsion type mixed fluid with water and oil is often used. It is pumped over the cutting site of cutting machines as a state of atomized water droplet coated with oil by using jet. In this paper, to develop cutting fluid supplying nozzle to obtain ultra thin oil film for coating water droplet, a numerical analysis of three dimensional mixed fluid Jet through multi-stage nozzle was carried out by using a finite volume method. Jet flow characteristics such as nozzle exit velocity, development of mixing region, re-entrance and jet intensity were analyzed. Detailed mixing process of fluids such as air, water and oil in the nozzle were also investigated. It is easy to understand complex flow pattern in multi-stage nozzle. Important flow Information for advance design of cutting fluid supplying nozzle was drawn.

• 한국경영과학회지
• /
• 제33권3호
• /
• pp.1-16
• /
• 2008

This paper considers a scheduling problem to minimize the total tardiness in the two-stage assembly-type flowshop. The system is composed of multiple fabrication machines in the first stage and a final-assembly machine in the second stage. Each job consists of multiple tasks, each task is performed on the fabrication machine specified in advance. After all the tasks of a job are finished, the assembly task can be started on the final-assembly machine. The completion time of a job is the time that the assembly task for the job is completed. The objective of this paper is to find the optimal schedule minimizing the total tardiness of a group of jobs. In the problem analysis, we first derive three solution properties to determine the sequence between two consecutive jobs. Moreover, two lower objective bounds are derived and tested along with the derived properties within a branch-and-bound scheme. Two efficient heuristic algorithms are also developed. The overall performances of the proposed properties, branch-and-bound and heuristic algorithms are evaluated through numerical experiments.

• 대한인간공학회지
• /
• 제31권2호
• /
• pp.413-419
• /
• 2012

Objective: This study presents an observation and analysis on behavioral characteristics of old users in comparison to young users in the use of control on display interface. Background: Touch interface which allows users to control directly on display, is conceived as delight and easy way of human-computer interaction. Due to the advantage in stimulus-response ensemble, the old users, who typically experiencing difficulties in interacting with computer, would expected to have better experience in using computing machines. Method: Twenty nine participants who are over 50 years old and 14 participants who are in 20s years old were participated in this study. Three primary tasks in touch interface, which are tap, move, and flick, were delivered by the users. For the tap task, response time and point of touch response were collected and the response bias was calculated for each trial. For the move task, delivery time and the distance of finger movements were recorded for each trial. For the flick task, task completion time and flicking distance were recorded. Results: From the collected behavioral data, temporal and spatial differences between young and old users behavior were analyzed. The older users showed difficulty in completing move task requiring eye-hand coordination.

• 환경위생공학
• /
• 제21권1호
• /
• pp.58-65
• /
• 2006

This study is measured in at ozone concentrated places in school and outside of school where places that use copy machine and the others do not use one. Library copy room, Search room, Y-Copy, J-copy, R-shop are the places using copy machines and Search room, K-apt, J-billiard hall are the opposite. The measurement was held three times a day-the morning, the afternoon and the evening-once for each at indoor and outdoor. 8 places were lower than domestic ozone concentration standard(0.06ppm). The indoor ozone concentration average was the highest in Search room of school and was the lowest in Library restroom. The outdoor ozone concentration average was the highest in J-billiard hall.

• 한국초등과학교육학회지:초등과학교육
• /
• 제26권1호
• /
• pp.108-116
• /
• 2007

The purpose of this study was to examine the views of elementary students and teachers in relation to life phenomenon. Students seemed to strongly agree with the notion of vitalism as well as with organicism. However they clearly disagreed with the notion of mechanism. Contrary to our supposition, their viewpoints on lift phenomenon were highly affected by their relative levels of academic achievement in science subject areas, rather than by their religious affiliations. One possible explanation for this outcome is that elementary schoolers have not firmly established religious views, though they might indeed have a religious affiliation. High-achieving children in science subject areas seemed to agree with both vitalism and organicism (p<.01), and it is suggested that those students must have had more opportunities to encounter related cases in modem science or life ethics. Teachers agreed with all three views, showing the highest rate of approval in organicism. Though they appeared to agree with mechanism, they were strongly opposed to radical mechanism generally arguing that 'organism and machines were essentially the same'. Student responses indicated that TV had a bigger influence on their viewpoint on life phenomenon than teachers did. This means that children held certain views about the relative significance and influences of teachers vis-a-vis TV in daily life, and is also reflective of a perception amongst students that teachers do not how the significance of viewpoints on lift phenomenon.

• 한국정밀공학회지
• /
• 제32권8호
• /
• pp.705-711
• /
• 2015

Five-Axis machines can generate undesirable defects such as the undercutting and overcutting errors that frequently occur in the three-axis machining process. It is therefore necessary to develop a program for NC-code generation, whereby the cutter posture is considered to decrease the occurrence of defects. In previous studies, the Easy-Impeller CAM(E-ICAM), an automatic CAM program used for the five-axis machining of impellers, was developed; however, when E-ICAM is used to machine an impeller, it is possible to gouge the hub and blade. Therefore, the aim of this study is the establishment of a formula for each type of endmill to minimize gouging according to the cutter posture, in consideration of several factors that affect accuracy in the machining of an impeller. This study also aimed to improve the performance and accuracy of E-ICAM in the manufacturing of impellers.

• Tribology and Lubricants
• /
• 제27권3호
• /
• pp.134-139
• /
• 2011

The mechanical equipments which are exposed to impure environment undergo significant reductions in their own lifetimes. Several environmental test procedures have been developed to analyze these phenomena. Moreover in the industry to require shorter development duration, accelerated life testers artificially add test containments into machines. In this research JIS Z 8901 test powder was added into internal gear pumps which are used as oil pumps in vehicles and thus the effects of the addition on the degradation of the pumps were examined. Three kinds of contaminants were selected. Two of the contaminants are identical in particle size but different in the composition of the ingredients. The other pair have identical ingredients and composition but different particle size. The quantity of contaminants was also an interesting factor in this study. The results show that each JIS contaminant caused notable degradation in the discharge flow characteristic of pumps while friction torque degradation did not have any tendency. Finally leakage rates were deduced and equivalent wear volume ratios were calculated.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.261-264
• /
• 2004

This paper presents the design and test of elliptical vibration assisted cutting tool post. It is actuated by two piezoelectric actuators which are connected to the moving part through the elastic hinge with its role of imposing the preliminary pressures. These two actuators are located at right angles so that the resulting tool tip moves like a two-dimensional ellipse. Also, the tool post is activated within the region of linear actuation in order to overcome the distorted elliptical motion. For the precise measurement of the displacement of the tool tip, three-dimensional experimental apparatus was designed and the strokes of the tool post in major and minor axes were measured. The results show that the tool post can produce the variety of vibration locus from a circle with a radius of 5 ${\mu}{\textrm}{m}$ to an ellipse with a major axis, a =10 ${\mu}{\textrm}{m}$, and a minor axis, b =2.5 ${\mu}{\textrm}{m}$