• 한국측량학회지
• /
• 제32권4_1호
• /
• pp.363-371
• /
• 2014

다수의광학위성센서들이선형 배열 형태에 기반을두고설계되었다. 널리 알려진 광학위성센서의 종류는 다음과 같이 경로 평행 방향 1열스캐너(along-track line scanner), 경로 직각 방향 1열 스캐너(across-track linescanner), 3열 스캐너(three- line scanner)로 구분할 수 있다. 이들 센서들을 이용하여 위성 및 항공기에서 지상지물의 정확한 위치정보를 획득하려고 할 때 센서의 외부 표정요소와 내부 표정요소는 매우 중요한 요소들이다. 이들 센서들의 영상생성기하구조는 태양에 의한열영향, 진동, 바람등의 다양한 물리적 현상들에 의하여 시시각각 변동될 가능성이 있기에 내부표정요소의 편의가 지상에 미치는 영향을 분석하는 것은 매우 중요하다. 실제적인 비행경로와 자세정보를 바탕으로 생성된 시뮬레이션 자료를 이용하여 본 연구에서는 각 센서의 초점거리에 편의량을 점진적으로 추가하면서 실험과 분석을 수행하였으며, 또한 비행고도를 고고도와 저고도의 두가지 경우로 비교하였다.실험결과, 경로평행방향 1열 스캐너의 경우에 초점거리편의량의 증가가 지상스캔라인방향(Y 방향)의 오차를 유발하였으며, 경로 직각 방향 1열 스캐너의 경우 스캔라인방향과 수직방향으로 오차가 증가하였고, 3열 스캐너의 경우에는 수직방향으로만 오차가 증가하였다. 이들 실험결과는 향후 새로운 센서개발과 센서캘리브레이션 정확도에 가이드라인을 제공할 수 있다고 본다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1427-1429
• /
• 2003

In our contribution, the new idea of parking/moving discrimination is proposed by using Three Line Scanner Imagery. The framework of our study consists of three main stages: preprocessing, vehicle detection and parking/moving detection respectively. First two stages of framework have been done in our previous work. Parking/ Moving Discrimination algorithm have been developed by using generic vehicle characteristics and some principle of photogrammetry. By using detected vehicles from our previous work, stopping/moving vehicles are able to discriminate. Moving vehicle is detected by detecting generic moving vehicle in TLS, inter-band gap. Stopping vehicle is verified by 3 dimensional viewing of Stereoscopic measurement. Finally, the conceptual framework has been done and the result will been realized soon.

• 한국측량학회지
• /
• 제32권1호
• /
• pp.1-8
• /
• 2014

The positions, attitudes, and internal orientation parameters of three line scanners are critical factors in order to acquire the accurate location of objects on the ground. Based on the assumption that positions and attitudes of the sensors are derived either from direct geo-referencing which of using Global Positioning Systems (GPS) and Inertial Navigation Systems (INS), or from indirect geo-referencing which of using Ground Control Points (GCPs), this paper describes on biased effects of Internal Orientation Parameter (IOP) on the ground. The research concentrated on geometrical explanations of effects from different focal length biases on the ground. The Synthetic data was collected by reasonable flight trajectories and attitudes of three line scanners. The result of experiments demonstrated that the focal length bias in case of indirect geo-referencing does not have critical influences on the quality of reconstructed ground space. Also, the relationships between IO parameters and EO parameters were found by the correlation analysis. In fact, the focal length bias in case of the direct geo-referencing caused significant errors on coordinates of reconstructed objects. The RMSE values along the vertical direction and the amount of focal length bias turned out to be almost perfect linear relationship.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.301-303
• /
• 2003

The extraction of 3D road network from high-resolution aerial images is still one of the current challenges in digital photogrammetry and computer vision. For many years, there are many researcher groups working for this task, but unt il now, there are no papers for doing this with TLS (Three linear scanner), which has been developed for the past several years, and has very high-resolution (about 3 cm in ground resolution). In this paper, we present a methodology of road extraction from high-resolution digital imagery taken over urban areas using this modern photogrammetry’s scanner (TLS). The key features of the approach are: (1) Because of high resolution of TLS image, our extraction method is especially designed for constructing 3D road map for next -generation digital navigation map; (2) for extracting road, we use the global context of the intensity variations associated with different features of road (i.e. zebra line and center line), prior to any local edge. So extraction can become comparatively easy, because we can use different special edge detector according different features. The results achieved with our approach show that it is possible and economic to extract 3D road data from Three Linear Scanner to construct next -generation digital navigation road map.

• Journal of Oral Medicine and Pain
• /
• 제44권2호
• /
• pp.74-76
• /
• 2019

A conservative treatment approach to temporomandibular disorder (TMD) is recommended as the first line of management, usually with a stabilization splint. Recently, computer-aided design/computer-aided manufacturing and three-dimensional printer has been widely used in the dentistry since several years ago. The authors apply digital dentistry in oral medicine fields to make stabilization splint for TMD treatment.

• 제어로봇시스템학회논문지
• /
• 제9권5호
• /
• pp.368-373
• /
• 2003

This paper presents a cost-effective 3D foot scanner system that provides the 3-dimensional point cloud foot data to design the custom footwear. To measure the 3-dimensional point cloud data of the foot, a CCD camera, a Non-Gaussian laser line projector and optical triangulation method are employed. Furthermore, the integrated system employs a measurement base, a frame grabber, a CCD moving cart, a stepping motor and a computer. The measurement result is saved as 3D dxf format and it could be converted to 2D essential data fer a shoe design. The experimental results demonstrate that the proposed system have the decent resolution of 1mm which is enough for last and shoe design.

• 한국정밀공학회지
• /
• 제31권12호
• /
• pp.1121-1126
• /
• 2014

To compensate location error of ultrasonic horn, the laser scanning system based on the galvanometer scanner is developed. It consists of the 3-Axis linear stage and the 2-Axis galvanometer scanner. To measure surface shape of three-dimensional free form surface, the dynamic focusing unit is adopted, which can maintain consistent focal plane. With combining the linear stage and the galvanometer scanner, the scanning area is enlarged. The scanning CAD system is developed by stage motion teaching and NURBS method. The laser scanning system is tested by marking experiment with the semi-cylindrical sample. Scanning accuracy is investigated by measured laser marked line width with various scanning speed.

• 제어로봇시스템학회논문지
• /
• 제10권7호
• /
• pp.643-648
• /
• 2004

Most of shoes manufacturing processes are not yet automated, which puts restrictions on the increase of productivity. Among them, adhesive application processes particularly are holding the most workers and working hours. In addition, its working conditions are very poor due to the toxicity of adhesive agents. In case of automating adhesive application processes by using robots, the robot teaching by playback is difficult to produce high productivity because the kinds of shoes to be taught mount up to several thousands. Therefore, it is essential to generate the robot working paths automatically according to the kind, the size, and the right and left of shoes, and also to teach them to the robot automatically. This study deals with automated adhesive spraying to shoe outsoles and uppers by using a robot, and develops the program to generate three-dimensional robot working paths off-line based on CAD data. First, the three-dimensional data of an outsole outline or an upper profiling line are extracted from the two-dimensional CAD drawing file or the three-dimensional scanner. Next, based on the extracted data and the nozzle conditions for adhesive spraying, a robot working path is generated automatically. This research work is the core in automating adhesive spraying processes, and will do much for increasing productivity of shoes manufacturing.

• 대한치과의사협회지
• /
• 제54권6호
• /
• pp.414-428
• /
• 2016

Objectives: The aim of this study was to assess the morphologic characteristics of two types of stainless steel crowns (SSCs) for the first primary molar using a 3D scanner. Study design: Two types of SSCs, KIDS CROWN (KC) and 3M ESPE ND-96 (ND), for the first primary molars were scanned using a 3D scanner. The mesiodistal and buccolingual diameters at the height of the contour and the cervical margin, occlusocervical diameters on the mesial, distal, buccal, and lingual aspects were measured, and the crown shape ratio, the smooth surface crown height ratio, and the cervical convergence were calculated. Results: In the crown shape ratio of the mandibular SSC, KC was larger buccolingually compared with ND. In the smooth surface crown height ratio, ND was larger than KC in all of the maxilla and mesial, distal, and lingual aspects of the mandible. ND was more convergent to the cervical mesiodistally and buccolingually compared with KC. Conclusion: In the superimposed images of the maxillary SSC, the mesiolingual and distolingual line angles of KC were more prominent compared with ND. In the mandible, ND demonstrated higher cusps and more obvious buccal developmental lobes than KC. ND showed a larger cervical undercut than KC.

• 전자공학회논문지CI
• /
• 제38권2호
• /
• pp.27-32
• /
• 2001

본 논문은 패러렐 카메라 모델을 사용한 카메라 캘리브레이션과 3차원 스캐닝 알고리즘에 관한 것이다. 레이저 스트립라인이 스테레오 매칭을 위해 보조적으로 사용하였으나 원리적으로는 불필요하다. 피측정 물체는 스뎀핑모터에 의해 플레이트 위에서 360도 회전하며, 카메라로부터 거리를 측정하여 월드좌표를 구한다. 피측정 물체의 월드좌표는 모델좌표로 변환되며 다수의 군집 모델좌표로부터 모델링을 위한 면을 추출하고 OpenGL을 이용하여 렌더링 한다. 본 알고리즘은 에피폴라 라인의 매칭점의 유효성을 검사하여 잘못된 매칭값을 버리고 무효한 매칭값은 유효한 값으로부터 보간법으로 산출한다.