• Journal of Sensor Science and Technology
• /
• v.29 no.4
• /
• pp.232-236
• /
• 2020

Three-dimensional (3D) multilayered Pt electrodes were fabricated to develop a porous electrode using a pattern-transfer printing process. The Pt thin films were deposited using a transferred sputtering pattern having a 250 nm line width on the substrate, and the uniform line patterns were efficiently transferred using our proposed method. Temperature-programmed desorption (TPD) analyses were used to evaluate the porosity of the electrodes. It was possible to distinguish between two resolved maxima at 168 and 227 ℃, which could be described in terms of desorption reactions on the Pt (111) planes. The results of the TPD analysis of the 3D and multilayered Pt electrodes prepared through transfer printing were compared to those of an electrode fabricated through screen printing using a commercial Pt-carbon paste commonly used as porous electrodes. It was confirmed that the 3D multilayered electrodes exhibited a desorption concentration approximately 100 times higher than that of the Pt-carbon composite electrode, and the desorption concentration increased by approximately 0.02 mg/mol per layer. The 3D multilayered electrode effectively functions as a porous electrode and a catalyst.

• Journal of Power System Engineering
• /
• v.4 no.3
• /
• pp.25-33
• /
• 2000

This study represents three-dimensional turbulent flow characteristics around an axial fan measured at the operating point ${\varphi}=0.32$, which is equivalent to the maximum flowrate region, by using three-dimensional fiber-optic type LDA system. This LDA system is composed of a 5 W Argon-ion laser, two optics in back-scatter mode, three BSA's, a PC, and a three-dimensional automatic traversing system. A kind of paraffin fog is used for laser particles in this study. Mean velocity profiles around an axial fan along the downstream radial distance show that the streamwise and the tangential components exist as a predominant velocity and have the maximum value at the radial distance ratio 0.8, while the radial component has a small scale distribution and its flow direction is inward except a part of blade tip. The turbulent intensity profiles show that the radial component exists the most greatly. And also the turbulent kinetic energy shows about 60% as a maximum value at the radial distance ratio 0.9. Moreover, the Reynolds shear stresses do not exist at upstream flow, but the streamwise and the radial components of them show about 20% as a maximum value at the radial distance ratio 0.9 at downstream flow.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.413-413
• /
• 2000

In this paper, we propose a series of calibrations f3r the x-ray three dimensional imaging system. In the developed x-ray system, a three dimensional inner and outer shape of an object can be reconstructed out of two dimensional transmitted x-ray image set, which are acquired by projecting x-ray to the object from different views. To achieve this, a reconstruction algorithm which estimates and updates the three dimensional volume from x-ray images is developed. The algorithm is named as uniform and simultaneous algebraic reconstruction technique(USART) which is an iterative method estimating a 3D volume based on its projected images. In this method, it is assumed that the imaging conditions that are the relative positions between the x-ray sources, object and the image planes are blown. Practically it is not easy to know the three dimensional coordinate of the components of the system, since the x-ray is not visible and the image distortions are present due to the optical components in the system. In this paper, methods of correcting image distortions are present firstly. Then the coordinates of the x-ray systems are calibrated from the x-ray images of the grid pattern. Some experimental results on these calibrations are present and discussed.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.1
• /
• pp.31-37
• /
• 2017

PURPOSE. The purpose of this study was to analyze the influence of the platform switching concept on an implant system and peri-implant bone using three-dimensional finite element analysis. MATERIALS AND METHODS. Two three-dimensional finite element models for wide platform and platform switching were created. In the wide platform model, a wide platform abutment was connected to a wide platform implant. In the platform switching model, the wide platform abutment of the wide platform model was replaced by a regular platform abutment. A contact condition was set between the implant components. A vertical load of 300 N was applied to the crown. The maximum von Mises stress values and displacements of the two models were compared to analyze the biomechanical behavior of the models. RESULTS. In the two models, the stress was mainly concentrated at the bottom of the abutment and the top surface of the implant in both models. However, the von Mises stress values were much higher in the platform switching model in most of the components, except for the bone. The highest von Mises values and stress distribution pattern of the bone were similar in the two models. The components of the platform switching model showed greater displacement than those of the wide platform model. CONCLUSION. Due to the stress concentration generated in the implant and the prosthodontic components of the platform switched implant, the mechanical complications might occur when platform switching concept is used.

• Korean Journal of Occupational Health Nursing
• /
• v.28 no.4
• /
• pp.262-270
• /
• 2019

Purpose: This study aims to provide preliminary data for weight management, and prevention and management of cardiovascular and cerebrovascular diseases. We examined the effect of changes in the weight of workers at a manufacturing company over three years on their metabolic syndrome and metabolic syndrome diagnosis components. Methods: Necessary data were collected from the questionnaire and the results of the Korean National Health Screening of 2015 and 2017, which included 228 workers at a manufacturing company in G region. The collected data were analyzed using the SPSS/WIN 23.0 program. ANCOVA was used to examine the differences in the metabolic syndrome diagnosis components according to weight change. In addition, multiple logistic regression analysis was used to obtain the odds ratios of metabolic syndrome and metabolic syndrome analysis component, based on the weight changes in the normal weight group and the obesity group. Results: Waist measure, systolic blood pressure, and blood pressure were found to have significant effects based on participants' weight change over three years. These factors increased with a larger increase in weight at a statistically significant level. This study analyzed the weight changes of the normal weight group and the obesity group considering the data from the National Health Screening of 2015, and found that the risk of metabolic syndrome increased at a statistically significant level as body weight increased; thus, the obesity group showed a higher risk in this regard. It was also found that waist measure, fasting blood sugar, and high-density low cholesterol increased at a statistically significant level as body weight increased. Conclusion: Health administrators need to recognize the importance of workers' weight management, select an intensive management group based on a time series analysis of weight changes, and develop and implement programs to manage the metabolic syndrome diagnosis components.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.19 no.4
• /
• pp.17-27
• /
• 2017

This study analyzes the trends of photo image components and forms of expression in global fashion advertising photos. First, photo image components are classified into seven categories: location (indoor-outdoor), the model's movement, pose, facial expression, gender, race and number of models. The forms of expression are classified into six categories: direct expression, sensual expression, symbolic expression, storytelling expression, dramatic expression, and sexual expression. With the aforementioned classifications, the trends were studied for three years from 2013 to 2015. The analysis result indicates the following: for the details of photo image components, the portion of indoor photos, static poses and conscious facial expressions was over 60% of the total for every season of the 3 years, while there was a slight increase in the number of models and the diversity of races. For the forms of expression, the sensual expression showed the largest portion accounting for over 50% of the total, followed by direct expression and storytelling expression. The findings from this study show that the trends of photo image components and forms of expression in global fashion advertisements are changing. Therefore, domestic companies will need to develop photo image components and forms of expression in line with the changing global fashion advertisement trends.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.3
• /
• pp.181-185
• /
• 1999

To compare the composition of volatile flavor components of three different cultivars of rice, Hyangnambyeo (aromatic cultivar), Heugjinjubyeo (pigmented cultivar) and Dongjinbyeo (normal cultivar), the volatile flavor components of brown rice were isolated by Likens-Nickerson simultaneous steam distillation and extraction apparatus. The flavor concentrates obtained were analyzed by gas chromatography and gas chromatography-mass spectrometry. A total of 65 components, including 14 aliphatic aldehydes and ketones, 7 aliphatic alcohols, 8 aromatic alcohols, 13 hydrocarbons, 9 esters, 7 aliphatic acids, and 7 miscellaneous components were identified. The aliphatic aldehydes, which are known as contributors to the overall flavor of cooked rice, were present in larger amounts in Hyangnambyeo than in Heugjinjubyeo and Dongjinbyeo, while the difference in quantity of these components between Heugjinjubyeo and Dongjinbyeo was not remarkable. Hyangnambyeo and Heugjinjubeyo contained 562 ng and 259 ng of 2-acetyl-1-pyrroline per gram of brown rice based on dry weight, respectively, which is a key compound contributing to the popcorn-like aroma in aromatic rice. Dongjinbeyo contained about 6 ng.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.41 no.3
• /
• pp.45-58
• /
• 2016

Data are important in an organization because they are used in making decisions and obtaining insights. Furthermore, given the increasing importance of data in modern society, data governance should be requested to increase an organization's competitive power. However, data governance concepts have caused confusion because of the myriad of guidelines proposed by related institutions and researchers. In this study, we re-established the concept of ambiguous data governance and derived the top-level components by analyzing previous research. This study identified the components of data governance and quantitatively analyzed the relation between these components by using DEMATEL and context analysis techniques that are often used to solve complex problems. Three higher components (data compliance management, data quality management, and data organization management) and 13 lower components are derived as data governance components. Furthermore, importance analysis shows that data quality management, data compliance management, and data organization management are the top components of data governance in order of priority. This study can be used as a basis for presenting standards or establishing concepts of data governance.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.135-138
• /
• 2002

VCO(Voltage Controlled Oscillator) is one of the main components governing the size, performance and power consumption of telecommunication devices. As the devices become much smaller, VCO need to have much smaller size with better characteristics. Buried type passive components of L,C,R were developed previously and the structure of these components are good for minimizing the size of VCO. Our own library of passive components is used in simulation and fabrication of VCO circuit, and surface mounted components like varactor diode are analysed using the measurement circuit designed by ourselves. Two-Dimensional simulation of VCO circuit and local three-Dimensional structure simulation are performed and their relation is obtained. In structure of multi-layered VCO, some components governing the characteristics of VCO are selected and placed on the top of oscillator for the good tuning process. In resonator part, the stripline structure and low loss glass/ceramic material are used to get higher Q value. In our research, a VCO oscillates in the 2.3∼2.36 GHz band is developed.

• ETRI Journal
• /
• v.34 no.5
• /
• pp.690-695
• /
• 2012

We investigate the light-emitting performances of blue phosphorescent organic light-emitting diodes (PHOLEDs) with three different electron injection and transport materials, that is, bathocuproine(2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline) (Bphen), 1,3,5-tri(m-pyrid-3-yl-phenyl)benzene (Tm3PyPB), and 2,6-bis(3-(carbazol-9-yl)phenyl)pyridine (26DCzPPy), which are partially doped with cesium metal. We find that the device characteristics are very dependent on the nature of the introduced electron injection layer (EIL) and electron transporting layer (ETL). When the appropriate EIL and ETL are combined, the peak external quantum efficiency and peak power efficiency improve up to 20.7% and 45.6 lm/W, respectively. Moreover, this blue PHOLED even maintains high external quantum efficiency of 19.6% and 16.9% at a luminance of $1,000cd/m^2$ and $10,000cd/m^2$, respectively.