• 한국의상디자인학회지
• /
• 제15권2호
• /
• pp.57-64
• /
• 2013

As the clothing materials have been more functional and advanced, the cotton fabrics for dress shirts or blouses have been more qualified and the sewability for high degree of completion has been required. This study aims to identify the seam strength depending on the change of stitch density of fine cotton fabrics by fabric and thread and so the general seam performance of fine cotton fabrics by analyzing the seam efficiency and breaking mode of seams. For an experiment, 3 kinds of fine cotton fabrics and 2 kinds of threads were selected and the sample was made by changing the stitch density by four steps. Then, the seam strength was measured. Next, the seam efficiency and breaking mode of seams were analyzed on the basis of the results of seam strength measurement. The results are as follows: All fabrics showed the similar tendency in seam strength. The seam strength is related to the tensile strength and thread strength, it increased only to a certain stitch density. When the stitch density exceeded a certain level, fabrics were destroyed or threads were cut. Then, the seam strength didn't increase. Furthermore, the more the seam strength increased, the more the seam efficiency increased. For increasing the maximum stitch density, it was required to use the fabrics and threads which had similar properties, in other words, the high thread strength for the high tensile strength and the low thread strength for the high tensile strength.

• 한국의상디자인학회지
• /
• 제15권4호
• /
• pp.113-128
• /
• 2013

Those records indicate that Jik-geum Hyoong-bae fabric was imported from China and its period was during the fourteen and fifteen century. Gold threads used in three Jik-geum Hyoong-bae artifacts were all wrapped gold thread and gold thread of Danryeong from Young-dukdong, Yong-in, did not have a base, but instead the gold foil itself was attached to the silk cord. Such form of artifact had never been discovered before in Korea. Wrapped gold thread of Seoknamdong's basis was presumably bamboo paper. Three Jik-geum Hyoong-bae have the same weave structure. The ground is woven in a warp-faced 5-end satin weave. The pattern is brocaded with supplementary gold wefts. Supplementary gold wefts are composed of 1/4 twill binding by the odd number pairs of warps within every group of 10 pairs of warps. All of the Jik-geum Hyoong-bae textile were designed and weaved according to the overlapped collared costume's structure. This is also known as 'Jik-seong-pil-ryo'. One symmetric collared jacket excavated in Seok-namdong, Incheon, only has the right half of Hyoong-bae in the front. This is because symmetric collared jacket was made from overlapped collared costume. Tiger and peacock are the main patterns of Jik-geum Hyoong-bae which have realistic and free screen composition and this shows a huge difference to the later generation's standardized Hyoong-bae pattern.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2006년도 특별논문집
• /
• pp.15-22
• /
• 2006

Global strength check for TLP tendon body can be estimated based on maximum tendon tensions and bending moments, which are resulted in TLP global performance analysis. Final tendon length, especially thread length on Length Adjustment Joint, is easily calculated with water depth at TLP in-place location, TLP lock-off draft and unlocking length of tendon bottom section. And LAJ thread length, which is locked with TLP top tendon connector, should be carefully determined with tendon design and installation tolerances.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.947-950
• /
• 2005

In this paper, we present an approach to control the locomotion of snake robot with concurrent programming model constructed using threads and semaphores. The multi-thread based concurrent programming model adds the flexibility to design and synchronize the movement of snake robots as compared with microcontroller and mechanical based approaches. We have designed a physical snake robot using LEGO sensors and actuator blocks and the wave motion of the snake robot is generated by multi-thread based concurrent programming under RT-Linux. The different robot movements in a desired direction along with different types of snake movements are achieved using angle sensors.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.892-897
• /
• 2000

In this study, tap wear was analyzed not only to predict the tap life time but also to propose an improved tap design. Because rake angle and thread relief of tap are the significant factors in geometry of tap, these two factors were picked as the experiment variables. The experiment was conducted with six types of tap which have 6$^{\circ}$ , 8$^{\circ}$ and 12$^{\circ}$ of rake angles with 0,08mm and 0.14 mm of thread relief. From the measured cutting force, it could be known that cutting torque was low at the large the rake thread relief and tool life was long as rake angle became large. Eventually, tool life is longest when rake angle is 12$^{\circ}$ and the with 0.08mm thread relief. Aand the width of crater wear and that of flank wear were measured when a tapping torque was 20 [$kg_f$-mm] . Most of the measured values were above the width of tool wear[$V_B$=O.O3m], which means that tool life is over.

• 소성∙가공
• /
• 제21권3호
• /
• pp.179-185
• /
• 2012

In this paper, it is proposed to produce high precision screws with a diameter of $800{\mu}m$ and a thread pitch of $200{\mu}m$ ($M0.8{\times}P0.2$) by means of a cold thread rolling process. In this part II of the study, the focus is on the production and reliability testing of the prototype $M0.8{\times}P0.2$ micro-screw. Designs for two flat dies were developed with the aid of the literature and previous studies. Process parameters during the cold thread rolling process were established through FE simulations. The simulation results showed that the threads of the micro-screw are completely formed through the rolling process. Prototype $M0.8{\times}P0.2$ micro-screw were fabricated with a high precision thread rolling machine. In order to verify the simulation results, the deformed shape and dimensions obtained from the experiment were compared with those from the simulations. Hardness and failure torque of the fabricated micro-screw were also measured. The values obtained indicate that the CAE based process design used in this paper is very appropriate for the thread rolling of micro-sized screws.

• 대한치과보철학회지
• /
• 제38권4호
• /
• pp.526-543
• /
• 2000

Finite element analyses were performed to study effects on stress distribution generated in jaw bone for various shapes of dental implants: plateau type, plateau with small radius of curvature, triangular thread screw type in accordance with ISO regulations and square thread screw filleted with small radius partially. It was found that square thread screw filleted with small radius was more effective on stress distribution than other dental implants used in analyses. Additional analyses were performed on the implant with square thread screw filleted with small radius for very-ing design parameters, such as the width of thread end, the height of the thread of the implant and load direction, to determine the optimum dimensions of the implant. The highest stress concentration occurred at the region in jaw Pone adjacent to the first thread of the implant. The maximum effective stress induced by a 15 degree oblique load of 100 N was twice as high as the maximum effective stress caused by an equal amount of vertical load. Stress distribution was more effective in the case when the width of thread end and the height of thread were p/2 and 0.46p, respectively, where p is the pitch of thread. At last, using tensile force calculated from the possible insert torque without breading bone thread, finite element analysis was performed on the implant to calculate pre-stress when the primary fixation of the implant was operated in jaw bone. The maximum effective stress was 136.8 MPa which was proven to be safe.

• 한국의상디자인학회지
• /
• 제25권2호
• /
• pp.123-134
• /
• 2023

Fashion design, CAD production, and the use of digital software can shorten the time and production processes in the fashion industry, but there are still many limitations in how to similarly express textile textures. Having this awareness, how to implement the visual effects of textile texture similar to that of the real world in the virtual world is one of the major exploration tasks in the fashion industry. Therefore, this study aims to analyze examples of embroidery techniques in Christian Dior collections and explore how embroidery techniques in 3D CLO fashion design can express the texture of real clothes more similarly by creating virtual works through 3D samples and 3D CLO software. First, the analysis criteria and theoretical basis of this study were derived through a literature review on fashion textile embroidery techniques, identifying types and characteristics of embroidery techniques, and classifying them into 12 types. Second, photos of the Dior 2017-2023 SS/FW Ready-to-Wear collections were collected and analyzed through the case analysis VOGUE site. Third, it presents the production of 3D CLO works by deriving a method of implementing embroidery techniques through the design of sample textile embroidery techniques using substances 3D sample software. The study's has some limitations. First, in 3D CLO fashion design, the needle gap for embroidery must be widened to see the thread pattern. Second, by reducing the number of needles, it is necessary to imitate the actual embroidery effect. Third, it is judged that it will be effective to lengthen the thread and adjust the thickness of the thread. Fourth, the thickness of the entire embroidery pattern must be increased to enable a three-dimensional texture.

• 한국기계가공학회지
• /
• 제16권3호
• /
• pp.38-44
• /
• 2017

The technology of electrical discharge tap machining may be appropriate for making thread out of highly brittle material. Especially, it is very difficult to machine tap with the traditional method if the brittle material has been hardened by quenching. In this study, the shape of electrical discharge blind hole tap machining was analyzed by discharge time, discharge current, and the flushing hole condition after quenched the tool steel of STD11 has discharged the tap shape with a screw-shaped copper(Cu) electrode. An experimental design was planned and analyzed by Taguchi robust experimental design. The result showed that the shape of the blind hole discharge tap was influenced by the flushing hole, discharge time, and discharge current. The most important factor of the processing conditions was found to be the discharge current. When blind hole EDM with a copper electrode with a flushing hole was conducted, the discharged shape was found to be smooth and the angle of the discharged tapped thread was also found to be close to the thread angle of $60^{\circ}$. As the values of discharge time and discharge current increased, the EDMed surface coarsened due to the increase of the single discharge energy and the shape of the thread collapsing.

• 한국정보통신학회논문지
• /
• 제15권11호
• /
• pp.2301-2306
• /
• 2011

현재 범용성이 높은 전자계 시뮬레이터가 널리 보급되어 왔으며, 안테나 설계, EMC 설계, 측정, 초고주파 소자 설계 등에 활용되고 있다. 본 연구에서는 X 밴드 영역에서 다양한 전자계 문제 해석을 목적으로 멀티 코어 기반 PC 자원을 보다 효율적으로 활용하고, 나아가 TCP/IP 기반 네트워크 토폴로지 구성을 통한 효율성 높은 전자계 시뮬레이터 구현을 위한 프레임워크 구축과 구현 방안을 제안하고 그 유효성을 검증하였다.