• Journal of the Korea Computer Graphics Society
• /
• v.16 no.3
• /
• pp.1-10
• /
• 2010

In this paper, we propose a novel noiseless method of BRDF rendering on a GPU in real-time. Illumination at a surface point is formulated as an integral of BRDF producted with incident radiance over the hemi-sphere domain. The most popular method to compute the integral is the Monte Carlo method, which needs a large number of samples to achieve good image quality. But, it leads to increase of rendering time. Otherwise, a small number of sample points cause serious image noise. The main contribution of our work is a new importance sampling scheme producing a set of incoming ray samples varying continuously with respect to the eye ray. An incoming ray is importance-based sampled at different latitude angles of the eye ray, and then the ray samples are linearly connected to form a curve, called a thread. These threads give continuously moving incident rays for eye ray change, so they do not make image noise. Since even a small number of threads can achieve a plausible quality and also can be precomputed before rendering, they enable real-time BRDF rendering on the GPU.

• Journal of Acupuncture Research
• /
• v.38 no.4
• /
• pp.312-319
• /
• 2021

Background: Lumbar herniated intervertebral disc (LHIVD) is a frequently presented condition/disease in Korean medical institutions. In this study, the economics of thread embedding acupuncture (TEA) was evaluated in a randomized controlled trial comparing TEA with sham TEA (STEA). Methods: This economic evaluation was analyzed from a limited social perspective, and the per-protocol set was from a basic analysis perspective. The cost-effectiveness analysis was based on the change in visual analog scale score, and the cost-utility analysis was based on the quality-adjusted life years. The final results were expressed as the average cost-effectiveness ratio and incremental cost-effectiveness ratio, and furthermore sensitivity analysis was performed to confirm the robustness of the results observed. Results: The cost-effectiveness analysis showed that TEA was 9,908 won lower than STEA, while the decrease in 100 mm visual analog scale score was 8.5 mm greater in the TEA group compared with the STEA group (p > 0.05). The cost-utility analysis showed that TEA was 9,908 won lower than STEA, while the quality-adjusted life years of TEA was 0.0026 years higher than STEA (p > 0.05). These results were robust in the sensitivity analysis, but were not statistically significant. Conclusion: In treating LHIVD, TEA appeared to have cost-effectiveness and cost-utility compared with STEA. However, there were no significant differences between the groups in terms of cost, effectiveness, and utility indicators. Therefore, results must be interpreted prudently; this study was the 1^st to conduct an economic evaluation of TEA for LHIVD.

• Nuclear Engineering and Technology
• /
• v.55 no.8
• /
• pp.2905-2918
• /
• 2023

The valve assembly used in nuclear power plants is important safety-related equipment. In the new standard, the physical attributes are measured using a valve diagnosis test, which is used in the expansion to other non-tested valves using a quantitative test-basis methodology. With a motor-operated actuator, the state of stem's lubrication is related to physical attributes such as the stem factor and the friction coefficient. This study analyzed the numerical transient of fluid and solid lubrication with a squeeze film effect due to the loading rate on the stem and the stem nut using the experimental data. The differential equation that governs the motion mechanism of the stem and stem nut is established and analyzed. The flow rate, the fluid and the solid contact forces are calculated with the friction coefficient. Finally, we found that a change in the friction coefficient results from a change of the shear force in the solid contact mode during the interchange process between the solid contact mode and the fluid contact mode. The qualitative understanding of the squeeze film effect is expanded quantitatively for forces, thread surface distance, velocity, and acceleration, with consideration of the metal solid contact and fluid contact.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2005.04a
• /
• pp.232-239
• /
• 2005

The objective of this study is to evaluate the simulated effects of axial and off-axial vertical loads at the implant/bone interface and the stress distribution according to the bone density of a single-unit dental implant in the cylinder and square thread implants by 3D FEA The implants were placed in the mandibular model with 25mm in height, 15mm in width and 20mm in length; then the mandibular bone density was classified into the bone type : I, II III and IV. In addition, the force were applied into 0mm, 2mm, 4mm away from the center of the implants.

• Journal of the Korean Society of Costume
• /
• v.53 no.2
• /
• pp.127-135
• /
• 2003

Woon Kyun was one of the shoulder cloth worn by both men and women during Won(원) Dynasty. The distinet features of Woon Kyun was that it had cloud-form embroidered on chest, back and both shoulders respectively and the front of it was opened. It also glitterinyly decorated with five different colored embroidery inserted with gold thread. 26 Woon Kyun out of 59 men demonstrated on the miniature of ≪Jipsa≫ were selected and analyzed according to the historical periods, class and sex. The results of the study showed that there was little change on its forms and patterns and people wore it without specific differentiation. The common patterns of embroidery used were various kinds of animals and plants, however, plants seemed to be more preferred.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.28 no.1
• /
• pp.43-50
• /
• 2010

The 200mesh screen was tensioned and fixed on a frame. When applied tension to 5N and 10N per unit area, a side length of opening of the screen was 163.223${\mu}m$ and 168.224${\mu}m$, respective. But side length not tensioned was 158.879${\mu}m$. We knew that a side length of opening of the screen rarely changes with tension applied to the screen. The appearances that a side length of opening of the screen expand little are due to a decreasing diameter of thread by means of tension. In a thickness measurement of screen, While the high density mesh screen that had a lot of knots that crossed a line of latitude and longitude per unit area appeared a higher numerical value, the low density mesh screen that had a few knots appeared a low numerical value.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.42
• /
• pp.3-32
• /
• 2009

As we know, Incoterms are reflecting only the greatest common measure of practice in int'l trade. Therefore we can think them as the commercial practice most widely used in trade. They contain a number of detail under converse mirror image terms because they connect each other like a thread as to all oversea's commercial transactions between importing buyers and exporting sellers. Therefore they afford convenience to exporters and importers in the world because they tell the parties what to do as to transfer of risk and costs, responsibilities in connection with delivery of the goods. Nonetheless, since Incoterms 1936, they have been periodically revising in order to represent contemporary commercial practice. Therefore, according to change of Int'l trade environment, ICC plans to modify to the 2000 Incoterms. I hope to contribute to revising works by reference of above mentioned revision, that to say, aspects of provision, reflection of prevailing most commonly used, promotion of status as uniform rules, provision of convenience of int'l buyers and sellers. harmony with existing int'l instruments, presentation of criteria in variation of Incoterms.

• Tribology and Lubricants
• /
• v.23 no.2
• /
• pp.61-65
• /
• 2007

It is very important to connect machinery and maintain it. This is usually done by bolt joint. There are two ways in connecting the bolt joint : the angle method and the torque method. The torque method is a method that let the clamping force maintain. The underhead of the bolt's head and the thread friction are the main influences. This study focuses on how the clamping farce and friction coefficient change under the condition in vibrating the underhead of the bolt's head part. As a result, under vibration condition, we found out that the clamping farce increases, while the friction coefficient decreases.

• Fibers and Polymers
• /
• v.5 no.4
• /
• pp.316-320
• /
• 2004

Waterproof fabrics are seamed and sealed by waterproof sealing tape to prevent water from penetrating through the stitch holes. As this process may change the mechanical properties of breathable waterproof fabric related to its deformation with human body, the changes in mechanical properties were investigated. In both of parallel and perpendicular directions, tensile characteristics were remarkably changed with seaming and sealing processes. The increase of LT and WT means that the clothing sealed by waterproofing tape may produce somewhat discomfort feeling. On the other hand, the bridge of the sewing thread seemed to be reinforced by waterproofing tape. Shear characteristics such as G, 2HG, and 2HG5 gradually increased with seaming and sealing processes in parallel direction. However, they decreased with sealing process in perpendicular direction because the seam line would work as an axis located at the center of the testing range.

• Advances in concrete construction
• /
• v.12 no.6
• /
• pp.491-497
• /
• 2021

Cell components play vital role within the cell when the cell under goes deformation. These components are microtubules, microfilaments and intermediate filaments. Intermediate filaments are like thread and are of different types. Like microtubules and microfilaments these components also undergo the deformation and their dynamics affected when change occurs within cell. In the present study, bending of intermediate filaments are studied keeping the nonlocal effects under consideration. It is observed that the nonlocal parameter has a great impact on the dynamics of intermediate filaments. This study is made by the application of Euler beam theory.