• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.794-799
• /
• 2001

For the development of an electric molding machine with low energy, high performance, and high reliability, characterization, finite element analysis and fatigue strength analyses were performed. Strain was measured by strain gages bonded on electric molding machine and compared with stress analysis results using I-DEAS. The analyses showed good agreement with test results. By means of the comparison, we could draw an adequate boundary condition for the stress analysis of the components of electric molding machine. Additionally, we could verify the load distribution mechanism among the parts. The life prediction results for tie bar and thread zone showed infinite life.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.11
• /
• pp.2301-2306
• /
• 2011

Current general-purpose electromagnetic field simulators have been widespread applied, and is being used to electromagnetic problems such as antenna design, EMC design, measurement, and microwave device design, etc. This paper is to solve various electromagnetic problems in X-band region for utilizing multi-core-based PC available network resources more efficiently. The electromagnetic field simulator based on TCP / IP-based network topology, configuration, and its framework design is proposed and its availability is examined.

• Journal of Adhesion and Interface
• /
• v.3 no.1
• /
• pp.30-36
• /
• 2002

In this paper, some idea about the use of Metal and ceramic filled epoxy adhesive, Anaerobic adhesive and RTV silicone in the assembly, maintain and repair of machinery and equipment is given. Many examples which have been successfully used in Chinese industry are introduced: ${\bullet}$ Wear, Abrasion, Corrosion/Erosion Resistance and Metal Rebuilding Worn shafts, Scored Hydraulic Ram, Bearing Housings, Slurry Pumps (Bodies & Impellers), Slide-ways, Heat Exchangers, Cracked Castings and Molds. Leaking Pipes and Tanks. ${\bullet}$ Locking and Retaining Thread, Bearing, Keyways, Bolts, Nuts, Studs, Gears, Collars, Motors. ${\bullet}$ Scaling and Gasketing Flanges, Pipe Joints, Machined surfaces.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1613-1617
• /
• 2009

As demand regarding a recent energy-saving rises, the using ratio of the aluminum plate in manufacturing of a railroad vehicle has been increasing. The aluminum structure to be applied to a railroad vehicle is divided to single skin and double skin, and the main aluminum product is mainly Al 6005 extrude and Al 5083 rolled in domestic market. The Al 6005 alloy is applied heat treatment in order to improve the strength of material. Therefore there is the disadvantage that the strength of welding zone decreases compare with base material's if you apply to fusion welding like MIG(metal inert gas) welding. In this paper we tried to apply friction stir welding to solve these problems. In this study we investigated how tensile strength and fatigue strength were changed in case of changing the shoulder diameter of thread tool.

• Animal Systematics, Evolution and Diversity
• /
• v.28 no.3
• /
• pp.168-177
• /
• 2012

Two stichotrichid ciliates, collected from marine waters in Jeju Island, were identified as Afroamphisiella multinucleata Foissner et al., 2002 and Pseudokahliella marina (Foissner et al., 1982) Berger et al., 1985. They are recorded for the first time in Korea. The descriptions are based on examinations of living as well as protargol-impregnated specimens. These species are characterized as follows. Afroamphisiella multinucleata has a body size in vivo of $70-95{\times}20-35{\mu}m$; elongate rectangular in shape; contractile vacuole located slightly above mid-body. The adoral zone is bipartited into 3 distal and 13-17 proximal membranelles and occupies 28-35% of the body length. The frontal row comprises 1-4 cirri and one buccal cirrus. The amphisiellid median cirral row is composed of 14-21 cirri, 10-19 left marginal cirri, and 21-30 right marginal cirri. Cortical granules are yellowish. 11-20 globular/ellipsoidal macronuclear nodules arrange proximally along the cell margins. Pseudokahliella marina has a body size in vivo of $110-195{\times}40-110{\mu}m$ and broadly elliptical in shape. The adoral zone of the membranelles occupies 50-60% of the body length, and is composed of 41-70 membranelles. A prominent frontal scutum is present. The contractile vacuole is located below the mid-body. There are 11-13 frontoventral rows, including marginal rows. Caudal cirri and transverse cirri are absent. Three invariable non-fragmented bipolar dorsal kineties are present. The left and right marginal rows are composed of 22-35 and 28-40 cirri, respectively. Colourless cortical granules are present. 8-11 spherical/ellipsoidal macronuclear nodules are connected with each other by thread-like tructures, forming an inverted C-shape.

• Journal of the Korean Institute of Gas
• /
• v.22 no.1
• /
• pp.60-63
• /
• 2018

This paper presents the FEM analysis results on the strength safety of a gas valve for a LPG cylinder. Based on the FEM analysis, the maximum von Mises stress on the boundary zone between a safety valve and the upper area of the thread is 99.2 MPa for the supplied gas pressure of 3.5 MPa in which the gas valve is fully opened. The maximum von Mises stress of 99.2 MPa is considered as safety value, because that value is lower than the yield stress of a brass material. In this case, the maximum deformation at the upper right part of the pressure regulator is 0.002mm. The maximum deformation zone is not a meaning part of the sealing part such as an O-ring or a diaphragm of a gas valve and a pressure regulator. The proposed hybrid gas valve model in which is integrated with a conventional cut-off valve and a pressure regulator is recommended as a gas leakage free mechanism and minimized compact size for a LPG cylinder.

• Korean Journal of Acupuncture
• /
• v.27 no.3
• /
• pp.129-142
• /
• 2010

Background : The Bonghan theory is a hypothesis on the anatomical structure of the acupuncture point and meridian system. It has been regarded as a misunderstanding of the lymphatic system, or as a made-up story, for the past 40 years. Since 2002, Many studies have been published either to support the theory or to refute the old viewpoint. Objective : The purpose of this study was to find out the validity of the refutation by reviewing the publications. Methods : Searches were made from online databases (Riss4u.net, Google.com, Sciencedirect.com, Pubmed.com, baidu.com, and ci.nii.ac.jp) from 1960 to 2009. The search terms that were used were "Bonghan," "Bong han," "봉한," "thread-like structure," "KИM БOH XaHOM", "CИCTEMA KEHPAK," "鳳漢," "鳳漢管," and "鳳漢学說." References from the searched publications were also used. Results : Since the 1960s, 107 publications were identified as related works, but only 11 publications sought to refute the Bonghan theory. Two publications were researches, and nine were reviews. In the analysis of the correlation of the arguments with the publication contents, it was found that the research of G. Kellner reviewed the Bonghan system properly but that V. V. Kosmatov did not classify the ear-reflex zone as a traditional acupuncture point. For the review publications, only two reviews contained proper arguments, but seven publications were identified as broad interpretations, wrong translations, etc. Moreover, the two proper reviews were grounded on the research of G. Kellner. Conclusions : We found that the scientific origin of the refutation of the Bonghan theory is only one research by G. Kellner. This result suggest that Bonghan theory was not discussed enough to determine the invention.