• Progress in Superconductivity and Cryogenics
• /
• v.15 no.3
• /
• pp.40-48
• /
• 2013

Cryoablation device is a surgical instrument to produce the cooling effect to destroy detrimental biological tissue by utilizing low temperature around 110 K. Usually, this device has the concentrated cooling region, so that it is suitable for concentrated and thick target. Accordingly, it is hard to apply this device for the target which is distributed and thin target. In this study, the design procedure of a closed-loop cryoablation device with multiple J-T expansion part is developed for the treatment of incompetent of great saphenous vein. The developed cyoablation device is designed with the analysis of 1-dimensional (1-D) bio-heat equation. The energy balance is considered to determine the minimum mass flow rate of refrigerant for consecutive flow boiling to develop the uniform cooling temperature. Azeotropic mixed refrigerant R410A and zeotropic mixed refrigerant (MR) of R22 ($CHClF_2$) and R23 ($CHF_3$) are utilized as operating fluids of the developed cryoablation device to form the sufficient temperature and to verify the quality of the inside of cryoablation probe. The experimental results of R410A and the zeotropic MR show the temperature non-uniformity over the range are $244.8K{\pm}2.7K$ and $239.8K{\pm}4.7K$ respectively. The experimental results demonstrate that the probe experiences the consecutive flow boiling over the target range of 200 mm.

• Journal of The Korean Astronomical Society
• /
• v.48 no.3
• /
• pp.195-202
• /
• 2015

Star forming galaxies found in the early universe exhibit asymmetric Lyα emission line that results from multiple scattering in a neutral thick medium surrounding the Lyα emission source. It is expected that emergent Lyα will be significantly polarized through a large number of resonance scattering events followed by a number of successive wing scatterings. In this study we adopt a Monte Carlo method to calculate the polarization of Lyα transferred in a very thick static slab of H_I. Resonantly scattered radiation associated with transitions between is only weakly polarized and therefore linear polarization of the emergent Lyα is mainly dependent on the number of off-resonant wing scattering events. The number of wing scattering events just before escape from the slab is determined by the product of the Doppler parameter a and the line center optical depth τ₀, which, in turn, determines the behavior of the linear polarization of Lyα. This result is analogous to the study of polarized radiative transfer of Thomson scattered photons in an electron slab, where the emergent photons are polarized in the direction perpendicular to the slab when the scattering optical depth is small and polarized in the parallel direction when the slab is optically thick. Our simulated spectropolarimetry of Lyα shows that the line center is negligibly polarized, the near wing parts polarized in the direction parallel to the slab and the far wing parts are polarized in the direction perpendicular to the slab. We emphasize that the flip of polarization direction in the wing parts of Lyα naturally reflects the diffusive nature of the Lyα transfer process in thick neutral media.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.3
• /
• pp.141-148
• /
• 2015

The cryogenic cooling system should maintain the HTS power cable below 77 K. As the length of HTS power cables has increased, there have been many efforts to develop large capacity cryocoolers. Brayton, Joule-Thomson, and Claude refrigerators were considered for the large capacity cryocooler. Among the various cryocoolers, the Brayton refrigerator is the most competitive in terms of the HTS power cable. At present, it is thought that a 10-kW class refrigerator will be able to be used as a unit cooling system for the commercialization of HTS power cables in the near future. The Brayton refrigerator is composed of recuperative heat exchangers, a compressor, and a cryogenic turbo expander. Among the various components, the cryogenic turbo expander is the part that decreases the temperature, and it is the most significant component that is closely related with overall system efficiency. It rotates at high speed using high-pressure helium or neon gas at cryogenic temperatures. This paper describes the design of a 300-W class Brayton refrigeration cycle and the cryogenic turbo expander as a downscale model for the practical 10-kW class cycle. Flow and structural analyses are performed on the rotating impeller and nozzle to verify the efficiency and the design performance.

• BMB Reports
• /
• v.36 no.2
• /
• pp.159-166
• /
• 2003

Cytoplasmic $\alpha$-glycerol-3-phosphate dehydrogenase from fruit-bat-breast muscle was purified by ion-exchange and affinity chromatography. The specific activity of the purified enzyme was approximately 120 units/mg of protein. The apparent molecular weight of the native enzyme, as determined by gel filtration on Sephadex G-100 was $59,500{\pm}650$ daltons; its subunit size was estimated to be $35,700{\pm}140$ by SDS-polyacrylamide gel electrophoresis. The true Michaelis-Menten constants for all substrates at pH 7.5 were $3.9{\pm}0.7\;mM$, $0.65{\pm}0.05\;mM$, $0.26{\pm}0.06\;mM$, and $0.005{\pm}0.0004\;mM$ for L-glycerol-3-phosphate, $NAD^+$, DHAP, and NADH, respectively. The true Michaelis-Menten constants at pH 10.0 were $2.30{\pm}0.21\;mM$ and $0.20{\pm}0.01\;mM$ for L-glycerol-3-phosphate and $NAD^+$, respectively. The turnover number, $k_{cat}$, of the forward reaction was $1.9{\pm}0.2{\times}10^4\;s^{-1}$. The treatment of the enzyme with 5,5'-dithiobis-2-nitrobenzoic acid (DTNB) under denaturing conditions indicated that there were a total of eight cysteine residues, while only two of these residues were reactive towards DTNB in the native enzyme. The overall results of the in vitro experiments suggest that $\alpha$-glycerol-3-phosphate dehydrogenase of the fruit bat preferentially catalyses the reduction of dihydroxyacetone phosphate to glycerol-3-phosphate.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.18
• /
• pp.7625-7628
• /
• 2014

Breast cancer is the most common cancer among women worldwide. The primary aim of this work was to provide an in-depth evaluation of research publications in the field of diets and breast cancer. The impact of economic outcome on national academic productivity was also investigated. Data were retrieved using Pubmed for English-language publications. The search included all research for which articles included words relating to "diets and breast cancer". Population and national income data were obtained from publicly available databases. Impact factors for journals were obtained from Journal Citation Reports$^{(R)}$ (Thomson Scientific). There were 2,396 publications from 60 countries in 384 journals with an impact factor. Among them, 1,652 (68.94%) publications were Original articles. The United States had the highest quantity (51% of total) and highest of mean impact factor (8.852) for publication. Sweden had the highest productivity of publication when adjusted for number of population (6 publications per million population). Publications from the Asian nation increased from 5.3% in 2006 to 14.6% in 2012. The Original article type was also associated with geography (p<0.001; OR=2.183; 95%CI=1.526-3.123), Asian countries produced more proportion of Original articles (82%) than those of rest of the world (67.6%). Diets and breast cancer-associated research output continues to increase annually worldwide including publications from Asian countries. Although the United States produced the most publications, European nations per capita were higher in publication output.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.4
• /
• pp.507-514
• /
• 2001

Two experiments were carried out to investigate whether duckweed is useful as a dietary protein source for fine-wool Merino sheep and to evaluate its effects on wool yield and characteristics. In Experiment 1, the sheep were given one of three maintenance diets consisting of oaten chaff (520-700 g/d) supplemented with 16-32 g crude protein/d in the form of fresh (1 kg/d) or sun-dried (50-100 g/d) duckweed. Each ration was estimated to provide 5.4 MJ (1.3 Mcal)/d of metabolisable energy (ME). The sheep readily ingested the fresh or dried duckweed. None of the wool measures (yield, rate of fibre elongation, fibre diameter) differed (p>0.05) between dietary treatments. In Experiment 2, oaten-chaff-based diets (800 g/d) supplying 6.5-7.2 MJ (1.6-1.7 Mcal)/d of ME were supplemented with iso-nitrogenous amounts (4-5 g N) either of urea (8 g), cottonseed meal (60 g) or dried duckweed (100 g). In this experiment, the rate of wool fibre elongation, thought to be related to intestinal amino acid absorption, was lower (p<0.05) for sheep given the oaten chaff/urea diet than for those given either oaten chaff/cottonseed meal or oaten chaff/duckweed for which the rates did not differ (p>0.05). Fibre diameter, which ranged from 16.0-16.7 mm, did not differ (p>0.05) between diets, but tended to be lower on the oaten chaff/urea diet so that volume of wool produced was also significantly lower (p<0.05) on this diet than on the diets containing duckweed or cottonseed meal. Rumen ammonia concentrations at 4.5 and 7.5 h after feeding were higher (p<0.05) for sheep given the oaten chaff/urea diet than for those given the other two diets. A comparison of the rumen ammonia concentrations, wool growth rate and predicted flows of amino acids from the rumen of sheep supplemented with duckweed rather than cottonseed meal suggested that duckweed is a valuable source of 'escape protein' for ruminants.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.10
• /
• pp.5567-5577
• /
• 2013

The prevalence of oral cancers (OC) is high in Asian countries, especially in South and Southeast Asia. Asian distinct cultural practices such as betel-quid chewing, and varying patterns of tobacco and alcohol use are important risk factors that predispose to cancer of the oral cavity. The aim of this review is to provide an update on epidemiology of OC between 2000 and 2012. A literature search for this review was conducted on Medline for articles on OC from Asian countries. Some of the articles were also hand searched using Google. High incidence rates were reported from developing nations like India, Pakistan, Bangladesh, Taiwan and Sri Lanka. While an increasing trend has been observed in Pakistan, Taiwan and Thailand, a decreasing trend is seen in Philippines and Sri Lanka. The mean age of occurrence of cancer in different parts of oral cavity is usually between 51-55 years in most countries. The tongue is the leading site among oral cancers in India. The next most common sites in Asian countries include the buccal mucosa and gingiva. The 5 year survival rate has been low for OC, despite improvements in diagnosis and treatment. Tobacco chewing, smoking and alcohol are the main reasons for the increasing incidence rates. Low socioeconomic status and diet low in nutritional value lacking vegetables and fruits contribute towards the risk. In addition, viral infections, such as HPV and poor oral hygiene, are other important risk factors. Hence, it is important to control OC by screening for early diagnosis and controlling tobacco and alcohol use. It is also necessary to have cancer surveillance at the national-level to collect and utilise data for cancer prevention and control programs.

• Archives of Plastic Surgery
• /
• v.41 no.4
• /
• pp.379-386
• /
• 2014

Background Vulvar defects result chiefly from oncologic resection of vulvar tumors. Reconstruction of vulvar defects restores form and function for the purpose of coitus, micturition, and defecation. Many surgical options exist for vulvar reconstruction. The purpose of this article is to present our experience with vulvar reconstruction. Methods From 2007 to 2013, 43 women presented to us with vulvar defects for reconstruction. Their mean age at the time of reconstruction was 61.1 years. The most common cause of vulvar defect was from resection of vulvar carcinoma and extramammary Paget's disease of the vulva. Method s of reconstruction ranged from primary closure to skin grafting to the use of pedicled flaps. Results The main complications were that of long term hypertrophic and/or unaesthetic scarring of the donor site in 4 patients. Twenty-two patients (51%) were able to resume sexual intercourse. There were no complications of flap loss, wound dehiscence, and urethral stenosis. Conclusions We present a subunit algorithmic approach to vulvar reconstruction based on defect location within the vulva, dimension of the defect, and patient age and comorbidity. The gracilis and gluteal fold flaps are particularly versatile and aesthetically suited for reconstruction of a variety of vulvar defects. From an aesthetic viewpoint the gluteal fold flap was superior because of the well-concealed donor scar. We advocate the routine use of these 2 flaps for vulvar reconstruction.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.20-20
• /
• 2009

저항 점 용접은 1930년대에 Thomson에 의해 방법이 제안된 이후로 자동차, 전자, 항공기, 철도산업등에서 박판 금속(sheet metal)의 접합에 가장 널리 사용되고 있는 공정이다. 특히 자동차 차체와 같이 대부분 박판으로 구성되는 구조물에서는 저항 점 용접의 사용 범위가 매우 넓기 때문에 자동차 산업에서는 가장 기본적인 근본 기술 중의 하나로 인식되고 있다. 보통 자동차 한대를 생산하는데 소요되는 저항 점 용접 타점은 3000~4000개 정도로 자동차 차체 용접 공정의 대부분을 차지하고 있다. 또한 로봇과 연동된 자동화 공정으로 적용되고 있다. 최근의 자동차 차체를 구성하는 금속 재료가 자동차의 경량화, 친화경 소재의 사용자의 요구로 인해 새로운 강판이 사용된다. 자동차의 연비 향상을 위해서 다른 방법보다 자동차의 무게를 감소시키는 것이 가장 효율적이고, 쉽기 때문에 고장력 강판의 사용이 급속하게 증가하고 있다. 뿐만 아니라 차제의 부식성, 내마모성 향상을 위해 도금 처리된 강판의 사용도 활발하게 이루어지고 있다. 최근에 도장 공정 감소를 위해 도금 처리위에 도료 착색을 용이하게 하는 도료의 일부를 금속 표면에 처리된 강판의 개발도 진행되는 등 금속 소재의 변화가 다양하게 진행되고 있다. 이러한 새로운 강종은 기존의 AC 용접이나 DC 용접으로는 용접성 확보에 어려움을 가지고 있어, 새로운 저항 점 용접 공정의 연구 개발이 필요하다. 본 연구에서는 저항 점 용접 공정의 개선을 위해서 인버터 저항 점 용접기에서 용접 공정 중 전류를 제어하기 위한 효율적인 제어기 개발 방법과 개발된 제어기를 바탕으로 용접 중에 용접부의 품질을 예측하여, 용접 전류 및 가압력을 실시간 제어하여 안정적인 용접부의 품질을 갖질 수 있는 지능형 저항 점 용접기의 적응 제어기를 개발하는데 있다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.12
• /
• pp.4467-4488
• /
• 2014

The bibliometric analysis is widely used for understanding research domains, trends, and knowledge structures in a particular field. The analysis has majorly been used in the field of information science, and it is currently applied to other academic fields. This paper describes the analysis of academic literatures for classifying research domains and for suggesting empty research areas in the telecommunications policy. The application software is developed for retrieving Thomson Reuters' Web of Knowledge (WoK) data via web services. It also used for conducting text mining analysis from contents and citations of publications. We used three text mining techniques: the Keyword Extraction Algorithm (KEA) analysis, the co-occurrence analysis, and the citation analysis. Also, R software is used for visualizing the term frequencies and the co-occurrence network among publications. We found that policies related to social communication services, the distribution of telecommunications infrastructures, and more practical and data-driven analysis researches are conducted in a recent decade. The citation analysis results presented that the publications are generally received citations, but most of them did not receive high citations in the telecommunications policy. However, although recent publications did not receive high citations, the productivity of papers in terms of citations was increased in recent ten years compared to the researches before 2004. Also, the distribution methods of infrastructures, and the inequity and gap appeared as topics in important references. We proposed the necessity of new research domains since the analysis results implies that the decrease of political approaches for technical problems is an issue in past researches. Also, insufficient researches on policies for new technologies exist in the field of telecommunications. This research is significant in regard to the first bibliometric analysis with abstracts and citation data in telecommunications as well as the development of software which has functions of web services and text mining techniques. Further research will be conducted with Big Data techniques and more text mining techniques.