• 제목/요약/키워드: Thomas model

검색결과 165건 처리시간 0.023초

"촘스키혁명"의 실상 (The Real Nature of "Chomskyan Revolution")

  • 문경환
    • 인문언어
    • /
    • 제8집
    • /
    • pp.175-198
    • /
    • 2006
  • Quite a few historiographers of language science have measured the applicability of the term 'revolution' toward the line of work initiated by Chomsky, with the conclusion to the positive or negative effect as the case may be. This paper starts out with a brief review of this issue, with an interim conclusion that, while Chomskyan linguistics may be regarded as revolutionary in certain aspects, terms like 'revolution' and 'paradigm' are hardly applicable here in the way they were originally intended by Thomas Kuhn. It can be said, nontechnically, that the model of theory under discussion is at once 'revolutionary' and 'evolutionary' - in the sense that revolutions in linguistics have not resulted in abrupt loss of continuity with past 'paradigms', if there were any such. Chomsky's theory of language plays the same role of consolidation and refinement of structuralism that, say, the neogrmmarians played in their day. It has continued some fundamental traits of its predecessor, recovered others, and unwittingly rediscovered still others. But this is not the main thrust of the present paper. For, even if Chomskyan theory were to be looked upon as straightforwardly 'revolutionary', that revolution has not been a felicitous one. Some critic (Pieter A. M. Seuren, to be specific) goes as far as to say that "largely as a result of Chomsky's actions, linguistics is now sociologically in a very unhealthy state $\cdots$ to the point even of threatening to make that whole school of linguistics intellectually irrelevant." Besides, under the present state of language science that strikes one as typical of what Kuhn has characterized as "pre-paradigmatic" insecurity and disharmony, an unhealthy situation might take place if we were to think of the theoretical disagreements as conflicts between 'incommensurable' viewpoints-between 'rival paradigms' as it were-thereby avoiding or evading rational discussion. Another danger concerns the bandwagon effect, with linguists prematurely boarding each novel theory seemingly destined for popularity, for fear of being left clinging to an outdated 'paradigm.' Here lies another reason why the notion of 'revolution', Kuhnian or not, might as well be put aside, in the historiography of linguistics at the least.

  • PDF

CHAINED COMPUTATIONS USING AN UNSTEADY 3D APPROACH FOR THE DETERMINATION OF THERMAL FATIGUE IN A T-JUNCTION OF A PWR NUCLEAR PLANT

  • Pasutto, Thomas;PENiguel, Christophe;Sakiz, Marc
    • Nuclear Engineering and Technology
    • /
    • 제38권2호
    • /
    • pp.147-154
    • /
    • 2006
  • Thermal fatigue of the coolant circuits of PWR plants is a major issue for nuclear safety. The problem is especially accute in mixing zones, like T-junctions, where large differences in water temperature between the two inlets and high levels of turbulence can lead to large temperature fluctuations at the wall. Until recently, studies on the matter had been tackled at EDF using steady methods: the fluid flow was solved with a CFD code using an averaged turbulence model, which led to the knowledge of the mean temperature and temperature variance at each point of the wall. But, being based on averaged quantities, this method could not reproduce the unsteady and 3D effects of the problem, like phase lag in temperature oscillations between two points, which can generate important stresses. Benefiting from advances in computer power and turbulence modelling, a new methodology is now applied, that allows to take these effects into account. The CFD tool Code_Saturne, developped at EDF, is used to solve the fluid flow using an unsteady L.E.S. approach. It is coupled with the thermal code Syrthes, which propagates the temperature fluctuations into the wall thickness. The instantaneous temperature field inside the wall can then be extracted and used for structure mechanics computations (mainly with EDF thermomechanics tool Code_Aster). The purpose of this paper is to present the application of this methodology to the simulation of a straight T-junction mock-up, similar to the Residual Heat Remover (RHR) junction found in N4 type PWR nuclear plants, and designed to study thermal striping and cracks propagation. The results are generally in good agreement with the measurements; yet, in certain areas of the flow, progress is still needed in L.E.S. modelling and in the treatment of instantaneous heat transfer at the wall.

Source of the Variation in Meat and Bone Meal Nutritional Quality

  • Hendriks, W.H.;Cottam, Y.H.;Morel, P.C.H.;Thomas, D.V.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제17권1호
    • /
    • pp.94-101
    • /
    • 2004
  • The gross composition, gross amino acid content, apparent ileal amino acid digestibility and apparent ileal digestible amino acid content from 64 commercially produced meat and bone meals were statistically analysed. The samples were produced by 22 plants over a 2.5 year period with eight plants using batch dry rendering and 14 plants using low temperature rendering. A linear model with method and time of year (period) as fixed effects, plant within method as a random effect and sheep percent as a covariate was fitted to the composition data. The majority of the variation in the gross composition, amino acid digestibility and digestible amino acid content was explained by differences between plants using the same method. Neither rendering season nor origin of the raw materials contributed significantly to the observed variation in meat and bone meal protein quality. Rendering method (low temperature or batch rendering) had a significant effect on the variation observed in gross fat content, gross energy content, pepsin nitrogen digestibility, protein solubility and total lanthionine content. The digestibility of a number of amino acids and the apparent digestible content of arginine, cysteine, aspartic acid, proline and hydroxyproline were also significantly affected by rendering method. On average, batch dry and low temperature rendering systems produce meat and bone meals of similar nutritional quality. The variation between plant and within plant, however, is large, indicating that purchasing meat and bone meal from the same plant does not guarantee a consistent quality.

급성기 신경계 환자에서 낙상 위험 사정 도구의 신뢰도 및 타당도 비교 (Comparison of the Reliability and Validity of Fall Risk Assessment Tools in Patients with Acute Neurological Disorders)

  • 김성렬;유성희;신용순;전지윤;김준우;강수정;최혜숙;이혜림;안영희
    • 성인간호학회지
    • /
    • 제25권1호
    • /
    • pp.24-32
    • /
    • 2013
  • Purpose: The aim of the study was to identify the most appropriate fall-risk assessment tool for neurological patients in an acute care setting. Methods: This descriptive study compared the reliability and validity of three fall-risk assessment tools (Morse Fall Scale, MFS; St Thomas's Risk Assessment Tool in Falling Elderly Inpatients, STRATIFY; Hendrich II Fall Risk Model, HFRM II). We assessed patients who were admitted to the Department of Neurology, Neurosurgery, and Rehabilitation at Asan Medical Center between July 1 and October 31, 2011, using a constructive questionnaire including general and clinical characteristics, and each item from the three tools. We analyzed inter-rater reliability with the kappa value, and the sensitivity, specificity, predictive value, and the area under the curve (AUC) of the three tools. Results: The analysis included 1,026 patients, and 32 falls occurred during this study. Inter-rater reliability was above 80% in all three tools. and the sensitivity was 50.0% (MFS), 84.4%(STRATIFY), and 59.4%(HFRM II). The AUC of the STRATIFY was 82.8. However, when the cutoff point was regulated as not 50 but 40 points, the AUC of the MFS was higher at 83.7. Conclusion: These results suggest that the STRATIFY may be the best tool for predicting falls for acute neurological patients.

Heat transfer monitoring between quenched high-temperature superconducting coated conductors and liquid nitrogen

  • Rubeli, Thomas;Colangelo, Daniele;Dutoit, Bertrand;Vojenciak, Michal
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제17권1호
    • /
    • pp.10-13
    • /
    • 2015
  • High-temperature superconducting coated conductors (HTS-CCs) are good candidates for resistive superconducting fault current limiter (RSFCL) applications. However, the high current density they can carry and their low thermal diffusivity expose them to the risk of thermal instability. In order to find the best compromise between stability and cost, it is important to study the heat transfer between HTS-CCs and the liquid nitrogen ($LN_2$) bath. This paper presents an experimental method to monitor in real-time the temperature of a quenched HTS-CC during a current pulse. The current and the associated voltage are measured, giving a precise knowledge of the amount of energy dissipated in the tape. These values are compared with an adiabatic numerical thermal model which takes into account heat capacity temperature dependence of the stabilizer and substrate. The result is a precise estimation of the heat transfer to the liquid nitrogen bath at each time step. Measurements were taken on a bare tape and have been repeated using increasing $Kapton^{(R)}$ insulation layers. The different heat exchange regimes can be clearly identified. This experimental method enables us to characterize the recooling process after a quench. Finally, suggestions are done to reduce the temperature increase of the tape, at a rated current and given limitation time, using different thermal insulation thicknesses.

Nutrient dynamics in decomposing litter from four selected tree species in Makurdi, Benue State, Nigeria

  • Okoh, Thomas;Edu, Esther
    • Journal of Ecology and Environment
    • /
    • 제43권4호
    • /
    • pp.376-384
    • /
    • 2019
  • Background: Nutrient release during litter decomposition was investigated in Vitex doniana, Terminalia avecinioides, Sarcocephallus latifolius, and Parinari curatellifolius in Makurdi, Benue State Nigeria (January 10 to March 10 and from June 10 to August 10, 2016). Leaf decomposition was measured as loss in mass of litter over time using the decay model Wt/W0 = e-kd t, while $Kd=-{\frac{1}{t}}In({\frac{Wt}{W0}})$ was used to evaluate decomposition rate. Time taken for half of litter to decompose was measured using T50 = ln 2/k; while nutrient accumulation index was evaluated as $NAI=(\frac{{\omega}t\;Xt}{{\omega}oXo})$. Results: Average mass of litter remaining after exposure ranged from 96.15 g, (V. doniana) to 78.11 g, (S. lafolius) in dry (November to March) and wet (April to October) seasons. Decomposition rate was averagely faster in the wet season (0.0030) than in the dry season (0.0022) with P. curatellifolius (0.0028) and T. avecinioides (0.0039) having the fastest decomposition rates in dry and wet seasons. Mean residence time (days) ranged from 929 to 356, while the time (days) for half the original mass to decompose ranged from 622 to 201 (dry and wet seasons). ANOVA revealed highly significant differences (p < 0.01) in decomposition rates and exposure time (days) and a significant interaction (p < 0.05) between species and exposure time in both seasons. Conclusion: Slow decomposition in the plant leaves implied carbon retention in the ecosystem and slow release of CO2 back to the atmosphere, while nitrogen was mineralized in both seasons. The plants therefore showed effectiveness in nutrient cycling and support productivity in the ecosystem.

리코나의 통합적 인격을 적용한 정보통신윤리 수업 설계 (The Instructional Design of Information Communication Ethics Based on Integrated Character of Lickona)

  • 류지민;김길모;조성환;김성식
    • 정보교육학회논문지
    • /
    • 제14권3호
    • /
    • pp.329-339
    • /
    • 2010
  • 본 연구는 현재까지의 정보통신윤리 교육이 인지적 영역만을 다루고 있는 점을 지적하고 이 문제점을 해결한 정보통신윤리 수업을 설계하고 이를 검증하는데 있다. 이를 위해 토마스리코나의 통합적 인격, 즉 인지적, 정의적, 행동적 요소를 적용하고자 하였다. 설계된 수업을 검증하기 위한 검사 도구로 이채영(2009)의 정보통신윤리 의식 검사문항을 통합적 인격의 구성요소를 포함하도록 수정하고 이를 검증하였다. 또한, Gerlach & Ely의 체제적 수업설계모형을 이용하여 각 단계별로 통합적 인격의 요소가 모두 포함되도록 정보통신윤리 수업을 설계하였고, 이를 실제 중등학교에 적용하여 그 효과성을 검증하였다. 적용 결과 통합적 인격을 적용한 정보통신윤리 수업은 실험집단이 통제집단보다 더 큰 효과가 있음을 확인하였다.

  • PDF

Global Utopia and Local Anxiety on the Stage of the Korean Musical

  • Choi, Sung Hee
    • 비교문화연구
    • /
    • 제36권
    • /
    • pp.123-147
    • /
    • 2014
  • The purpose of this essay is three-fold: to trace the genealogy of the Korean musical, which ever since its inception in the 1960s has been seeking to modernize Korean theater with Broadway as a constant role model; to investigate how the national and the global conflict and are conflated in the form of the Korean musical in the process of its (dis)identification with Broadway; and to examine how its intercultural translations reveal and reflect the dilemma and ambivalence posed by globalization in our era. Drawing on Richard Dyer's signature article Entertainment and Utopia, I analyze how the Korean musical manifests and conduits competing utopian impulses of Korean/Global audiences. I also attempt to problematize the formulaic notion of Broadway musicalsthe Superior Other!which implies a global hegemony that does not, in fact, exist because the boundary between the global and the local as well as the power dynamics of global culture are not fixed but constantly moving and changing. Today's musical scene in Korea shows interesting reversals from the 1990s, when Korean producers were eager to debut on Broadway and impress American audiences. Korean producers no longer look up to Broadway as a final destination; instead they want to make Seoul a new Broadway. They import Broadway musicals and turn them into Korean shows. The glamor of Broadway is no longer the main attraction of musicals in Korea. What young audiences look for most is the glamor of K-pop idols and utopian feelings of abundance, energy, intensity, transparency and community, which they can experience live in the musical with their favorite stars right in front of their eyes. In conclusion, I delve into the complex dynamics of recent Korean musicals with Thomas Friedman's theory of Globalization 3.0 as reference. The binary formula of Global/America versus Local/Korea cannot be applied to the dynamic and intercultural musical scene of today. Globalization is not a uniform phenomenon but rather a twofold (multifold) process of global domination and dissemination, in which the global and the local conflict and are conflated constantly. As this study tries to illuminate, the Korean musical has evolved in a huge net of interdependences between the global and the local with a range of sources, powers and influences.

Impact of viewing conditions on the performance assessment of different computer monitors used for dental diagnostics

  • Hastie, Thomas;Venske-Parker, Sascha;Aps, Johan K.M.
    • Imaging Science in Dentistry
    • /
    • 제51권2호
    • /
    • pp.137-148
    • /
    • 2021
  • Purpose: This study aimed to assess the computer monitors used for analysis and interpretation of digital radiographs within the clinics of the Oral Health Centre of Western Australia. Materials and Methods: In total, 135 computer monitors(3 brands, 6 models) were assessed by analysing the same radiographic image of a combined 13-step aluminium step wedge and the Artinis CDDent 1.0® (Artinis Medical Systems B.V.®, Elst, the Netherlands) test object. The number of steps and cylindrical objects observed on each monitor was recorded along with the monitor's make, model, position relative to the researcher's eye level, and proximity to the nearest window. The number of window panels blocked by blinds, the outside weather conditions, and the number of ceiling lights over the surgical suite/cubicle were also recorded. MedCalc® version 19.2.1 (MedCalc Software Ltd®, Ostend, Belgium, https://www.medcalc.org; 2020) was used for statistical analyses(Kruskal-Wallis test and stepwise regression analysis). The level of significance was set at P<0.05. Results: Stepwise regression analysis showed that only the monitor brand and proximity of the monitor to a window had a significant impact on the monitor's performance (P<0.05). The Kruskal-Wallis test showed significant differences (P<0.05) in monitor performance for all variables investigated, except for the weather and the clinic in which the monitors were placed. Conclusion: The vast performance variation present between computer monitors implies the need for a review of monitor selection, calibration, and viewing conditions.

Impact of waste crumb rubber on concrete performance incorporating silica fume and fly ash to make a sustainable low carbon concrete

  • Muhammad, Akbar;Zahoor, Hussain;Pan, Huali;Muhammad, Imran;Blessen Skariah, Thomas
    • Structural Engineering and Mechanics
    • /
    • 제85권2호
    • /
    • pp.275-287
    • /
    • 2023
  • The use of environmental-friendly building materials is becoming increasingly popular worldwide. Compared to the normal concrete, rubber-based concrete is considered more durable, environmentally friendly, socially and economically viable. In this investigation, M20 grade concrete was designed and the fine aggregates were replaced with crumb rubber of two different micron sizes (0.221 mm and 0.350 mm). Fly ash (FA) and silica fume (SF) replaces the binder as supplementary cementitious materials at a rate of 0, 5, 10, 15, and 20% by weight. The mechanical properties of concrete including compressive strength, tensile, and flexural strength were determined. The polynomial work expectation validates the response surface approach (RSM) concept for optimizing SF and FA substitution. The maximum compressive strength (22.53 MPa) can be observed for the concrete containing 10% crumb rubber, 15% fly ash and 15% silica fume. The reduced unit weight of the rubberized concrete may be attributed to the lower specific gravity of the rubber particles. Two-way ANOVA with a significance criterion of less than 0.001 has been utilized with modest residual error from the lack of fit and the pure error. The predictive model accurately forecasts the variable-response relationship. Since, the crumb rubber is obtained from wasted tires incorporating FA and SF as a cementitious ingredient, it helps to significantly improve mechanical properties of concrete and reduce environmental degradation.