• Restorative Dentistry and Endodontics
• /
• v.46 no.1
• /
• pp.7.1-7.8
• /
• 2021

Objectives: The aim of the current study is to investigate the effect of different anticaries agents, such as experimental agents based on silver nanoparticles (SNPs) and silver diamine fluoride (SDF), on the micro-shear bond strength (μ-SBS) of composite resin applied to intact enamel (IE) or demineralized enamel (DE). Materials and Methods: Sixty dental enamel fragments were collected from human third molars and categorized into 6 groups (n = 10): positive control (IE), negative control (DE), IE + SDF, DE + SDF, IE + SNP and DE + SNP. Samples from DE, DE + SDF and DE + SNP groups were subjected to pH cycling; superficial microhardness test was performed to confirm demineralization. Resin composite build-ups were applied to the samples (0.75-mm diameter and 1-mm height) after the treatments (except for IE and DE groups); μ-SBS was also evaluated. Samples were analyzed under a stereomicroscope at 40× magnification to identify failure patterns. Data were subjected to one-way analysis of variance, followed by Tukey's and Dunnett's tests (p < 0.05). Results: There was no significant difference among the IE, IE + SNP, DE + SDF, and DE + SNP groups. The IE + SDF and DE groups recorded the highest and the lowest μ-SBS values, respectively. Adhesive-type failures were the most frequent for all treatments. Conclusions: Anticaries agents did not have a negative effect on the μ-SBS of composite resin when it was used on IE or DE.

• Restorative Dentistry and Endodontics
• /
• v.47 no.1
• /
• pp.4.1-4.13
• /
• 2022

Objectives: This study evaluated the effects of different smear layer preparations on the dentin permeability and microtensile bond strength (µTBS) of 2 self-etching adhesives (Clearfil SE Bond [CSE] and Clearfil Tri-S Bond Universal [CTS]) under dynamic pulpal pressure. Materials and Methods: Human third molars were cut into crown segments. The dentin surfaces were prepared using 4 armamentaria: 600-grit SiC paper, coarse diamond burs, superfine diamond burs, and carbide burs. The pulp chamber of each crown segment was connected to a dynamic intra-pulpal pressure simulation apparatus, and the permeability test was done under a pressure of 15 cmH₂O. The relative permeability (%P) was evaluated on the smear layer-covered and bonded dentin surfaces. The teeth were bonded to either of the adhesives under pulpal pressure simulation, and cut into sticks after 24 hours water storage for the µTBS test. The resin-dentin interface and nanoleakage observations were performed using a scanning electron microscope. Statistical comparisons were done using analysis of variance and post hoc tests. Results: Only the method of surface preparation had a significant effect on permeability (p < 0.05). The smear layers created by the carbide and superfine diamond burs yielded the lowest permeability. CSE demonstrated a higher µTBS, with these values in the superfine diamond and carbide bur groups being the highest. Microscopic evaluation of the resin-dentin interface revealed nanoleakage in the coarse diamond bur and SiC paper groups for both adhesives. Conclusions: Superfine diamond and carbide burs can be recommended for dentin preparation with the use of 2-step CSE.

• Restorative Dentistry and Endodontics
• /
• v.49 no.1
• /
• pp.2.1-2.12
• /
• 2024

Objectives: This study aimed to determine the effects of 1-rooted mandibular second molar (MnSM) teeth on root canal anatomy complexities of the mandibular central incisor (MnCI), mandibular lateral incisor (MnLI), mandibular canine (MnCn), mandibular first premolar (MnFP), mandibular second premolar (MnSP), and mandibular first molar (MnFM) teeth. Materials and Methods: Cone-beam computed tomography images of 600 patients with full lower dentition were examined. Individuals with 1-rooted MnSMs were determined, and the complexity of root canal anatomy of other teeth was compared with individuals without 1-rooted MnSMs (Group-1; subjects with at least one 1-rooted MnSM, Group-2; subjects with more than a single root in both MnSMs). A second canal in MnCIs, MnLIs, MnCns, MnFPs, and MnSPs indicated a complicated root canal. The presence of a third root in MnFMs was recorded as complicated. Results: The prevalence of 1-rooted MnSMs was 12.2%, with the C-shaped root type being the most prevalent (9%). There were fewer complicated root canals in MnCIs (p = 0.02), MnLIs (p < 0.001), and MnFPs (p < 0.001) in Group 1. The other teeth showed no difference between the groups (p > 0.05). According to logistic regression analysis, 1-rooted right MnSMs had a negative effect on having complex canal systems of MnLIs and MnFPs. Left MnSMs were explanatory variables on left MnLIs and both MnFPs. Conclusions: In individuals with single-rooted MnSMs, a less complicated root canal system was observed in all teeth except the MnFMs.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.4
• /
• pp.658-665
• /
• 2007

Oligodontia is defined as the congenital absence of six or more teeth in dentition, excluding the third molars. The prevalence of congenital missing teeth is about 1.6 to 9.6% of population and the prevalence of oligidontia is about 0.08 to 1.1%. The mandibular second premolar is the most frequently absent after the third molar, followed by the maxillary lateral incisor and upper second premolar. Females seem to be affected slightly more than males. Oligodontia may occur either in isolation, or as a part of a syndrome such as ectodermal dysplasia. Different causes are possible for oligodontia: physical obstruction or distruction of the dental lamina, space limitation, functional abnormalities of the dental epithelium, failure of induction of the underlying mesenchyme, chemotherapy, radiotherapy or genetic factor. Because oligodontia would result in esthetic and functional problems, such as facial asymmetry or occlusal disharmony, early diagnosis from clinical and radiographic examination was necessary. And appropriate treatment plan should be followed. This case report was about oral conditions and treatment of the oligodontia patients who have no specific systemic disease.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.27 no.1
• /
• pp.76-80
• /
• 2005

Dentigerous cyst is one of the most prevalent types of odontogenic cysts in the jaw. Usually dentigerous cysts begin to develope through an accumulation of fluid between remnants of the enamel organ and subjacent tooth crown which is developing or submerged. The teeth most often involved are mandibular third molars, maxillary canines, and mandibular premolars. And the cysts usually occur in the second or third decade of life. The treatment of dentigerous cysts-enucleation, marsupialization, and fenestration-is dictated by the size, environmental structures of the lesion, and desirability of conserving involved tooth. Marsupialization is a conservative technique which allows the reduction or elimination of cystic lesion by making it an accessory compartment of the oral cavity in the case where complete enucleation is not desirable. Marsupialization is thought to be the most suitable method of treatment for the conserving of the involved tooth, thus guiding eruption of it. We report the positive outcome got from marsupialization in dentigerous cysts with review of literature.

• Journal of The Korean Dental Society of Anesthesiology
• /
• v.3 no.1 s.4
• /
• pp.10-18
• /
• 2003

Background: Studies on the pain have been dealing with many different ways for last several centuries. Especially, preemptive analgesia is being used as a method to control the postoperative pain. Many studies on its efficacy have been processed in different ways about various drugs, administration methods and times for various operations. And the value of preemptive analgesia are still controversial regarding the results of other clinical studies. The authors performed a clinical study on efficacy of preemptive analgesia using an non-steroidal anti-inflammatory drug (NSAID) for the surgical extraction of impacted third molar teeth and present the more effective pain treatment after oral surgery with literature review. Methods: Using a randomized double blind test design, this study compared the analgesic efficacies of an NSAID, Talniflumate 370 mg. This drug administrated first either 1 hour preoperatively (experimental group) or when the pain developed moderately to severely over 5 scale of verbal rating scales (0-10) to respective 30 patients undergoing the removal of impacted third molars. Pain intensity and the time from the end of surgery were assessed postoperatively whenever the patients demanded additional drug over 5 scale for forty eight hours using same verbal rating scales. Results: The sex distribution, the age of the patients. and the time required for surgery in two groups were similar. The average first time for demanding additional drug after surgery was 163.9 minutes in experimental group and 191.5 minutes in control group. At this time, the average pain intensity was 5.8 in experimental group and 6.1 in control group. And the average second time for demanding additional drug was 365.5 minutes in experimental group and 351.8 minutes in control group. At this time. the average pain intensities were 6.6 in experimental group and 6.2 in control group. No statistically significant difference was found between the average first times and second times, and the average pain intensities at first and second times in two groups. Conclusions: From these results the efficacy of preemptive analgesia used in this study was not appeared. This clinical study indicates that many NSAIDs administrated preoperatively in present practices have weak efficacy of preemptive analgesia for postoperative pain, thus the authors recommend that only postoperative analgesics are adequate without preoperative use of analgesics.

• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.758-767
• /
• 1995

The purpose of this study was to evaluate canal shaping ability after canal preparation by using engine-driven nickel-titanium file and endosonic file in curved canals. 30 mesiobuccal canals of molars extracted within recent 3 months were divided into 3 groups. Group I and group II were prepared by using engine-driven nickel-titanium Gates-Glidden drill type and the engine-driven nickel-titanium file type. Group III prepared by using en do sonic file. The image of preinstrumented canals was taken by X-ray. The image of postinstrumented canal was taken by X-ray in the same condition of preinstrumentation. A magnified X-ray image on magnifier screen was traced and then compared the preinstrumentated canal image with the postinstrumentated canal image by superimposing method. The following results were obtained : 1. In the change of canal curvature, the engine-driven nickel-titanium Gates-Glidden drill type showed the least change and the ultrasonically filing showed the greatest change. 2. In the percentage of canal enlargement, the engine-driven nickel-titanium file type was greatest at all level(p<0.05), the apex of all group was the greatest, the difference of ultrasonically filing group showed greater between apex and cervix. 3. The percentage of canal enlargement on convex side was greater than that of on concave side in apex of each group(p<0.05). In the ultrasonically filing group, both sides of canal enlargement showed sharply difference(p<0.01). 4. The percentage of canal enlargement on convex side was greater than that of on concave side in the third of cervix of the engine-driven nickel-titanium file type and the ultrasonically filling. The percentage of canal enlargement of convex and concave side in the third of middle of the engine-driven nickel-titanium Gates-Glidden drill type show a similar canal enlargement between convex side and concave side. As above result, the engine-driven nickel-titanium file type was greater in canal enlargement than the other instruments. The engine-driven nickel-titanium Gates-Glidden dirll type was efficient endodontic instrument for curved canal preparation because it was least change in canal curvature.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.49 no.5
• /
• pp.252-261
• /
• 2023

Objectives: Patients undergoing oral surgery exhibit high anxiety, which may elevate their cortisol levels and affect postoperative recovery. Overweight patients are often encountered in the dental clinic due to the increasing prevalence of overweight. We aimed to investigate the relationships between preoperatively assessed body mass index (BMI), serum cortisol and high-sensitivity C-reactive protein (hs-CRP) levels, and visual analog scale (VAS) scores and preoperative anxiety in patients undergoing mandibular third molar (MM3) extraction and to identify predictors of postoperative complications. Patients and Methods: We analyzed 43 patients (age, 20-42 years) undergoing MM3 extraction. At the first visit, patients completed the Modified Dental Anxiety Scale (MDAS) and Amsterdam Preoperative Anxiety and Information Scale (APAIS) questionnaires. Their BMI and VAS scores were also calculated. The participants underwent blood tests 1 hour before MM3 extraction. On the first postoperative day, the participants' VAS scores and serum hs-CRP levels were reevaluated. Results: We found that BMI was significantly correlated with preoperative VAS scores. Further, BMI and preoperative hs-CRP levels were significantly correlated among women and patients undergoing extractions of fully impacted MM3s. No correlations were found between serum cortisol and other variables. The preoperative MDAS and VAS scores were significantly positively correlated, especially among patients undergoing extractions of fully impacted MM3s. Multiple linear regression showed that BMI and the eruption status of the MM3 were significant predictors of postoperative hsCRP levels and VAS scores, respectively. Conclusion: In MM3 removals, patients with higher BMI showed elevated hs-CRP and higher VAS scores before surgery. Patients with higher anxiety among those undergoing extractions of fully impacted MM3s showed higher preoperative VAS scores. The two main predictors of postoperative complications were BMI and MM3 eruption status.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.29 no.4
• /
• pp.279-288
• /
• 2007

In the present study, we focused on stem cells in the dental papilla of the tooth germ. The tooth germ, sometimes called the tooth bud, is the primordial structure from which a tooth is formed. The tooth germ consists of the enamel organ, the dental papilla, and the dental follicle. The dental papilla lies below a cellular aggregation of the enamel organ. Mesenchymal cells within the dental papilla are responsible for formation of dentin and pulp of a tooth. Tooth germ disappears as a tooth is formed, but that of a third molar stays in the jawbone of a human until the age of 10 to 16, because third molars grow slowly. Impacted third molar tooth germs from young adults are sometimes extracted for orthodontic treatment. In the present study, we evaluated the osteogenic activity and mineralization of cultured human dental papilla-derived cells. Dental papillas were harvested from mandible during surgical extraction of lower impacted third molar from 3 patients aged 13-15 years. After passage 3, the dental papilla-derived cells were trypsinized and subsequently suspended in the osteogenic induction DMEM medium supplemented with 10% fetal bovine serum, 50 g/ml L-ascorbic acid 2-phosphate, 10 nM dexamethasone and 10 mM -glycerophosphate at a density of $1\;{\times}10^6\;cells/dish$ in a 100-mm culture dish. The dental papilla-derived cells were then cultured for 6 weeks and the medium was changes every 3 days during the incubation period. Dental papilla-derived cells showed positive alkaline phosphatase (ALP) staining during 42 days of culture period. The formation of ALP stain showed its maximal manifestation at day 7 of culture period, then decreased in intensity during the culture period. ALP mRNA level was largely elevated at 1 weeks and gradually decreased with culture time. Osteocalcin mRNA expression appeared at day 14 in culture, after that its expression continuously increased in a time-dependent manner up to day 28. The expression remained constant thereafter. Runx2 expression appeared at day 7 with no detection thereafter. Von Kossa-positive mineralization nodules were first present at day 14 in culture followed by an increased number of positive nodules during the entire duration of the culture period. Osteocalcin secretion was detectable in the culture medium from 1 week. The secretion of osteocalcin from dental papilla-derived cells into the medium greatly increased after 3 weeks although it showed a shallow increase by then. In conclusion, our study showed that cultured human dental papilla-derived cells differentiated into active osteoblastic cells that were involved in synthesis of bone matrix and the subsequent mineralization of the matrix.

• The korean journal of orthodontics
• /
• v.35 no.3 s.110
• /
• pp.182-195
• /
• 2005

The purpose of this retrospective study was to estimate the pretreatment characteristics of growing patients with Class II malocclusion. who had been treated with maxillary second molar extractions The sample comprised of 51 subjects; 18 subjects were classified into the molar extraction group, and 33 subjects were treated without extraction and classified into the nonextraction group. Pretreatment lateral cephalograms were calculated and analyzed by independent t-test and stepwise discriminant analysis. In measurements for skeletal pattern, no anteroposterior measurements and proportions of various vertical dimensions were significantly different. and only some measurements such as $AB-MP(^{\circ)$, Na-We(mm), AVD (mm) were significantly different between the two treatment groups (p<0.05). In measurements for dentoalveolar pattern. some measurements, which were related to the position and angulation of the upper and lower permanent first molars, and the angulation of the upper third molars, were significantly different between the two treatment groups In particular, the maxillary second molar extraction group exhibited more mesial angulation of maxillary first molar to the occlusal plane.