• Composites Research
• /
• 제23권6호
• /
• pp.47-54
• /
• 2010

위성체에 장착된 얇은 벽 복합재보에 대한 열 진동 특성에 대한 연구를 수행하였다. 복합재 보는 얇은 벽과 원주 방향으로 강성이 일정하다고 가정을 하였으며, 기존에 우주사용 적합성이 증명된 T300/Epoxy, YS90A/Epoxy와 같은 소재를 채택하여 모델링을 하였다. 자세제어 오차각 및 복합재 보의 끝단 변위에 대한 정적상태 및 정점-정점 오차를 열 진동 특성의 성능지수로 하여 평가하였으며, 평가결과 YS90A 복합재가 자세제어 오차각의 정점-정점 각도에서 2배 정도의 우수한 성능을 보여 주었다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.99-104
• /
• 2001

Thermally induced vibration response of solar array is investigated. The solar array model consists of composite thin walled beam and solar blanket, spreader bar. The composite thin walled beam incorporates a number of nonclassical effects of transverse shear, primary and secondary warping, rotary inertia and anisotropy of constituent materials. The solar blanket is a membrane subjected to uniform tension in the z direction. The spreader bar is a rigid member. A coupled thermal structure analysis that includes the effects of structural deformations on heating and temperature gradient is investigated. A stability criterion given in parameters for establishes the conditions for thermal flutter.

• 한국소음진동공학회논문집
• /
• 제20권6호
• /
• pp.583-592
• /
• 2010

Equations of motion of thin-walled composite H-type cross-section beams exposed to concentrated harmonic and non-harmonic time-dependent external excitations, incorporating a number of nonclassical effects of transverse shear, primary and secondary warping, and anisotropy of constituent materials are derived. The forced vibration response characteristics of a composite H-type cross-section beam exhibiting the circumferentially asymmetric stiffness(CAS) configuration are exploited in connection with the structural bending-torsion coupling resulting from directional properties of fiber reinforced composite materials.

• Steel and Composite Structures
• /
• 제9권3호
• /
• pp.275-301
• /
• 2009

The long-term behaviour of simply supported composite steel-concrete beams with deformable connectors subjected to skew bending and torsion is presented. The problem is dealt with by recurring to the displacement method, assuming the bending and torsional curvatures and the longitudinal deformations of each sectional part as unknowns and obtaining a system of differential and integro-differential equations. Some solving methods are presented, in order to obtain exact and approximate solutions and evaluate the precision of the approximate ones. A case study is then presented. For the sake of clearness, the responses of the composite beam under loads applied in different directions are studied separately, in order to correctly evaluate the effects of each load condition.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.161-164
• /
• 2000

In this paper, a finite element structural analysis for thin-walled open-section composite beams with elastic couplings has been performed. The analysis includes the effects of transverse shear across beam sections, torsion warping and constrained warping. Reissner's semi-complementary energy functional is used to obtain the beam st illness coefficients The bending and torsion related warpings and the shear correct ion factors are obtained as part of the analysis. The resulting theory describes the beam kinematics in terms of the axial, flap and lag bending, flap and lag shear, torsion and torsion-warping deformations. The static response has been validated against finite element predict ions, closed form solutions, and experimental data for rectangular sol id and I-beams with elastic couplings. The free vibration results are also compared with available literature.

• Steel and Composite Structures
• /
• 제20권3호
• /
• pp.693-718
• /
• 2016

This paper presents a finite element procedure based on Bridging multi-scale method (BMM) in order to incorporate the effect of local/cross-sectional deformations (e.g., flange local buckling and web crippling) on the global behaviour of thin-walled members made of fibre-reinforced polymer composite laminates. This method allows the application of local shell elements in critical regions of an existing beam-type model. Therefore, it obviates the need for using computationally expensive shell elements in the whole domain of the structure, which is otherwise necessary to capture the effect of the localized behaviour. Consequently, highly accurate analysis results can be achieved with this method by using significantly smaller finite element model, compared to the existing methods. The proposed method can be used for composite polymer laminates with arbitrary fibre orientation directions in different layers of the material, and under various loading conditions. Comparison with full shell-type finite element analysis results are made in order to illustrate the efficiency and accuracy of the proposed technique.

• 한국항공우주학회지
• /
• 제33권7호
• /
• pp.26-32
• /
• 2005

본 논문에서는 위성체 태양전지의 진동응답을 분석하였다. 태양전지는 복합재료 얇은 벽보와 태양전지 판 및 보조 바로 구성되어 있다. 복합재료 얇은 벽보는 전단 변형, 12차 와핑, 회전 관성과 재료의 방향성 등을 고려해야 한다. 태양전지 판은 z 방향으로 일정한 장력이 가해지는 얇은 막이며 보조 바는 강체 구조물이다. 열적 구배에 따른 구조 변형에 의한 영향을 고려하여 연성된 열적 구조 해석을 수행하였으며, 열적 불안정성 조건이 되는 안정성 기준 인자들을 분석하였다.

• Structural Engineering and Mechanics
• /
• 제3권1호
• /
• pp.91-103
• /
• 1995

An analysis to determine shear centers for anisotropic elastic thin-walled composite beams, cantilevered and loaded transversely at the free end is presented. The shear center is formulated based on familiar strength of material procedures analogous to those for isotropic beams. These procedures call for a balancing of torsional moments on the cross sectional surface and lead to a condition of zero resultant torsional couple. As a consequence, due the presence of anisotropic coupling, certain non-classical effects are manifested and are illustrated in two example problems. The most distinguishing result is that twisting may occur for composite beams even if shear forces are applied at the shear center. The derived shear center locations do not depend on any specific anisotropic bending theories per se, but only on the values of bending and shear stresses which such theories produce.

• Composites Research
• /
• 제20권6호
• /
• pp.15-20
• /
• 2007

본 연구에서는 혼합 보 이론을 이용하여 초기 비틀림 각을 갖는 박벽 복합재료 보에 대한 정적 거동 해석을 수행하였다. 보 해석 모델은 복합재료의 연계특성 및 박벽 두께효과, 그리고 비틀림 워핑을 고려하고 있다. 보의 인장-굽힘-비틀림 정적 거동에 대한 혼합적인 요소를 효과적으로 고려함과 동시에 보의 이론 전개를 위해 Reissner의 반보족에너지 함수를 도입하였다. 초기 비틀림 각의 도입에 따른 굽힘 및 비틀림 관련 워핑함수를 특별한 가설에 의존하지 않고 엄밀하게 유도하였다. 개발된 보 이론의 신뢰성을 제고하기 위한 일환으로 탄성적으로 연계된 복합재료 보에 대해 정적 구조해석을 수행하였으며, 해석 결과를 기존의 이론 및 유한요소 해석결과와 비교하여 그 타당성을 확보하였다.

• Advances in concrete construction
• /
• 제13권 2호
• /
• pp.153-162
• /
• 2022

Prefabricated exterior wall panel is the main non-load-bearing component of assembly building, which affects the comprehensive performance of thermal insulation and durability of the building. It is of great significance to develop new prefabricated exterior wall panel with durable and lightweight characteristics for the development of energy-saving and assembly building. In the prefabricated sandwich insulation hanging wall panel, the selection of material for the outer layer and the arrangement of the connector of the inner and outer wall layers affect the mechanical performance and durability of the wall panels. In this paper, high performance cement-based composites (HPFRC) are used in the outer layer of the new type wall panel. FRP bars are used as the interface connector. Through experiments and analysis, the influence of the arrangement of connectors on the mechanical behaviors of thin-walled composite wall panel and the panel with window openings under two working conditions are investigated. The failure modes and the role of connectors of thin-walled composite wallboard are analyzed. The influence of the thickness of the wall layer and their combination on the strain growth of the control section, the initial crack resistance, the ultimate bearing capacity and the deformation of the wall panels are analyzed. The research work provides a technical reference for the engineering design of the light-weight thin-walled and durable composite sandwich wall panel.