• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.458-458
• /
• 2013

We investigated a study on the thermal degradation of boron doped zinc-oxide (BZO) layer which used as a transparent conducting layer on the Cu (In1-xGax) Se2 (CIGS) based thin film solar cells. Devices were annealed under the temperature of $100^{\circ}C$ or 100 hours and then Hall measurement was carried out to characterize the parameters of mobility (${\mu}Hall$), resistivity (${\rho}$), conductivity (${\sigma}$) and sheet resistance (Rsh). The initial values of ${\mu}Hall$, ${\rho}$, ${\sigma}$ and Rsh were $29.3cm^2$/$V{\cdot}s$, $2.1{\times}10^{-3}{\Omega}{\cdot}cm$, $476.4{\Omega}^{-1}{\cdot}cm^{-1}$ and $19.1{\Omega}$/${\Box}$ respectively. After the annealing process, the values were $4.5cm^2$/$V{\cdot}s$, $12.8{\times}10^{-3}{\Omega}{\cdot}cm$, $77.9{\Omega}^{-1}{\cdot}cm^{-1}$ and $116.6{\Omega}$/${\Box}$ respectively. We observed that ${\mu}Hall$ and ${\sigma}$ were decreased, and ${\rho}$ and Rsh were increased. In this study, BZO layer plays an important role of conducting path for electrons generated by incident light onthe CIGS absorption layer. Therefore, the degradation of BZO layer characterized by the parameters of ${\mu}Hall$, ${\rho}$, ${\sigma}$ and Rsh, affect to the cell efficiency.

• 한국재료학회지
• /
• 제22권4호
• /
• pp.190-194
• /
• 2012

The formation of high-quality polycrystalline silicon (poly-Si) on relatively low cost substrate has been an important issue in the development of thin film solar cells. Poly-Si seed layers were fabricated by an inverse aluminum-induced crystallization (I-AIC) process and the properties of the resulting layer were characterized. The I-AIC process has an advantage of being able to continue the epitaxial growth without an Al layer removing process. An amorphous Si precursor layer was deposited on Corning glass substrates by RF magnetron sputtering system with Ar plasma. Then, Al thin film was deposited by thermal evaporation. An $SiO_2$ diffusion barrier layer was formed between Si and Al layers to control the surface orientation of seed layer. The crystallinity of the poly-Si seed layer was analyzed by Raman spectroscopy and x-ray diffraction (XRD). The grain size and orientation of the poly-Si seed layer were determined by electron back scattering diffraction (EBSD) method. The prepared poly-Si seed layer showed high volume fraction of crystalline Si and <100> orientation. The diffusion barrier layer and processing temperature significantly affected the grain size and orientation of the poly Si seed layer. The shorter oxidation time and lower processing temperature led to a better orientation of the poly-Si seed layer. This study presents the formation mechanism of a poly seed layer by inverse aluminum-induced crystallization.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.1.1-1.1
• /
• 2011

Printed electronics based on the direct writing of solution processable functional materials have been of paramount interest and importance. In this talk, the synthesis of printable inorganic functional materials (conductors and semiconductors) for thin-film transistors (TFTs) and photovoltaic devices, device fabrication based on a printing technique, and specific characteristics of devices are presented. For printable conductor materials, Ag ink is designed to achieve the long-term dispersion stability and good adhesion property on a glass substrate, and Cu ink is sophisticatedly formulated to endow the oxidation stability in air and even aqueous solvent system. The both inks were successfully printed onto either polymer or glass substrate, exhibiting the superior conductivity comparable to that of bulk one. In addition, the organic thin-film transistor based on the printed metal source/drain electrode exhibits the electrical performance comparable to that of a transistor based on a vacuum deposited Au electrode. For printable amorphous oxide semiconductors (AOSs), I introduce the noble ways to resolve the critical problems, a high processing temperature above $400^{\circ}C$ and low mobility of AOSs annealed at a low temperature below $400^{\circ}C$. The dependency of TFT performances on the chemical structure of AOSs is compared and contrasted to clarify which factor should be considered to realize the low temperature annealed, high performance AOSs. For photovoltaic application, CI(G)S nanoparticle ink for solution processable high performance solar cells is presented. By overcoming the critical drawbacks of conventional solution processed CI(G)S absorber layers, the device quality dense CI(G)S layer is obtained, affording 7.3% efficiency CI(G)S photovoltaic device.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.162-162
• /
• 2011

Nanometer-sized noble metals can trap and guide sunlight for enhanced absorption of light based on surface plasmon that is beneficial for generation of hot electron flows. A pulse of high kinetic energy electrons (1-3 eV), or hot electrons, in metals can be generated after surface exposure to external energy, such as in the absorption of light or in exothermic chemical processes. These energetic electrons are not at thermal equilibrium with the metal atoms. It is highly probable that the correlation between hot electron generation and surface plasmon can offer a new guide for energy conversion systems [1-3]. We show that hot electron flow is generated on the modified gold thin film (<10 nm) of metal-semiconductor (TiO2) Schottky diodes by photon absorption, which is amplified by localized surface plasmon resonance. The short-circuit photocurrent obtained with low energy photons (lower than bandgap of TiO2, ~3.1-3.2 eV) is consistent with Fowler's law, confirming the presence of hot electron flows. The morphology of the metal thin film was modified to a connected gold island structure after heating to 120, 160, 200, and 240$^{\circ}C$. These connected island structures exhibit both a significant increase in hot electron flow and a localized surface plasmon with the peak energy at 550-570 nm, which was separately characterized with UV-Vis [4]. The result indicates a strong correlation between the hot electron flow and localized surface plasmon resonance with possible application in hot electron based solar cells and photodetectors.

• 태양에너지
• /
• 제20권2호
• /
• pp.43-54
• /
• 2000

동시 진공증발법을 이용하여 coming glass, soda-lime glass, Mo가 증착된 soda-lime glass 위에 $Cu(In_{1-x}Ga_x)Se_2$ 박막을 증착하였다. Soda-lime glass 위에서 제조된 $Cu(In_{0.5}Ga_{0.5})Se_2$ 박막의 전기비저항값과 정공농도는Cu/(In+Ga)비에 큰 영향을 받지 않았다. Soda-lime glass위에서의 $Cu(In_{1-x}Ga_x)Se_2$ 박막내부와 표면에는 Na이 검출되었고, 표면의 Na는 산소와 결합하고 있었으며, Cu가 부족한 조성에서 이차상이 형성되었다. Ga/(In+Ga)비가 증가할수록 $Cu(In_{1-x}Ga_x)Se_2$ 박막은 회절 peak들의 큰 회절각으로 이동, 초격자 peak등의 분리, 결정립 크기의 감소가 관찰되었다. $Cu_{0.91}(In_{1-x}Ga_x)Se_2$ 박막은 Ga/(In+Ga)비에 무관하게 전기적으로 p-type을 나타내었다. Ag/n-ZnO /i-Zno/CdS/$Cu_{0.91}(In_{0.7}Ga_{0.3})Se_2$/Mo/glass구조의 태양전지를 제조하였으며, 태양전지변환효율(Eff.) = 14.48%, 단락전류밀도(Jsc) = $34.88mA/cm^2$, 개방전압(Voc) =581.5 mV, 충실도(F.F) = 0.714을 나타내었다.

• Korean Chemical Engineering Research
• /
• 제57권1호
• /
• pp.111-117
• /
• 2019

기상으로 전달된 Ti 전구체가 열 플라즈마에서 고순도의 결정질 코어-$TiO_2$로 합성됨과 동시에 기판에 바로 증착시킬 수 있는 공정을 제시한다. 제조된 코어-$TiO_2$는 외부에 노출되지 않는 상태에서 원자층증착법(Atomic Layer Deposition, ALD)에 의하여 $Al_2O_3$로 코팅된다. 코어-$TiO_2$와 코팅된 쉘-$Al_2O_3$의 형태학적 특징은 transmission electron microscope (TEM) 및 transmission electron microscope - energy dispersive spectroscopy (TEM-EDS)를 통해 분석하였다. 제조된 코어-$TiO_2$/쉘-$Al_2O_3$ 나노입자의 전기적 특성은 염료감응 태양전지(dye-sensitized solar cell, DSSC)의 작동전극에 적용하여 평가하였다. Dynamic light scattering system (DLS), scanning electron microscope (SEM), X-ray Diffraction (XRD)을 통하여 코어-$TiO_2$의 평균입도, 성장속도 및 결정구조의 무게분율을 분석한 결과, 평균입도는 17.1 nm, 코어박막의 두께는 $20.1{\mu}m$이고 주 결정구조가 Anatase로 증착된 코어-$TiO_2$/쉘-$Al_2O_3$ 나노입자를 적용한 DSSC가 기존의 페이스트 방식으로 제작한 DSSC보다 더 높은 광효율을 보여준다. 기존의 페이스트방식을 활용한 DSSC의 에너지변환효율 4.99%에 비하여 선택적으로 조절된 코어-$TiO_2$/쉘-$Al_2O_3$ 나노입자를 작동전극으로 사용한 경우가 6.28%로 26.1% 더 높은 광효율을 보여준다.

• 전기학회논문지P
• /
• 제61권3호
• /
• pp.116-121
• /
• 2012

Recently, in the field of renewable energy such as solar cells including the semiconductor and display industries, thin film deposition process is being diversified. Furthermore, to deal with trend of making high-quality and fast, the high-capacity and output plasma power supply which can control high density plasma is required. The biggest problem is arc discharge caused by using high voltage power supply. Thus, the key function of plasma power supply is to prevent arc discharge and there is a need to maintain the possible minimum arc energy. In DC sputtering power supply, on a periodic basis (-)voltage powering up is able to significantly reduce arcing, as well as arc discharge prevention, and maintaining uniform charge density. This conventional method for powering up (-)voltage requires heavy mutual inductance of the transformer to avoid distortion problem of the output voltage. This study is about energy recovery circuit for arc discharge prevention in sputtering plasma power supply. By using energy recovery circuit, it is possible to reduce the mutual inductance and size of the transformer dramatically, prevent distortion of the output voltage and has a stable output waveform. This work was proved through simulation and experimental study.

• Korean Chemical Engineering Research
• /
• 제52권6호
• /
• pp.781-788
• /
• 2014

Polyaniline modified graphene oxide (PANI/GO) composites were synthesized by dilute polymerization technique and were characterized by Fourier transformed infrared spectroscopy (FTIR), Raman spectroscopy, and scanning electron microscopy (SEM). The characterization results indicated that polyaniline molecules were successfully grafted on GO surfaces. The application of PANI/GO composites to the adsorption of heavy metals from aqueous solutions was investigated under ambient conditions. The maximum adsorption capacities of Co(II), Ni(II), Pb(II) and U(VI) ions on PANI/GO composites calculated from Langmuir models are 22.28, 25.67, 65.40 and 1552.31 mg/g, respectively. The excellent adsorption capacity suggests that PANI/GO composites can be applied as a promising adsorbent in heavy metal pollution cleanup in environmental pollution management.

• 한국전기전자재료학회논문지
• /
• 제25권8호
• /
• pp.620-625
• /
• 2012

The sol-gel method has been widely used to synthesize the $TiO_2$ for dye sensitized solar cells and has advantages of easily fabrication process, controlling the $TiO_2$ phase and getting transparent thin-film composed of the $TiO_2$. In this paper, we synthesized the crystalline $TiO_2$ by sol-gel method controlled by the quantity ratio of Nitric acid and Ammonium hydroxide additives. The best efficiency result was obtained by 0.05 M Ammonium hydroxide and that results of Voc, Jsc, FF, and efficiency were 0.68 V, 3.28 mA/$cm_2$, 58.14 and 5.21%, respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.2113_2114
• /
• 2009

Chalcopyrite based sollar cells have received much attention because of their tunable electronic and optical properties. As a typical ternary chalcopyrite material, $CuInS_2$ has been considered as one of the most popular and promising candidates as absorber materials for photovoltaic applications because of its high absorption coefficient and environmental consideration. In this study, $CuInS_2$ powders have been synthesized using polyol process of a mixture of copper nitrate, indium nitrate, and thiourea with various stoichiometric molar ratios in ethylene glycol at $196^{\circ}C$. As boiling time goes by, the color of metal ion mixed solutions were changed transparent green to dark green and finally turned to black by reduction of OH- radicals. The prepared powders were fully characterized using SEM, XRD. The particle shape of black colored powders showed sphere with about 50 nm in particle size compared to those with dark green colored powders showed irregular shape with about $1{\mu}m$ in particle size. The XRD results showed highly crystallized $CuInS_2$.