• Parasites, Hosts and Diseases
• /
• v.44 no.1 s.137
• /
• pp.35-41
• /
• 2006

Protozoan parasites of the genus Leishmania cause a number of important human diseases. One of the key determinants of parasite infectivity and survival is the surface glycoconjugate lipophosphoglycan (LPG). In addition, LPG is shown to be useful as a transmission blocking vaccine. Since culture supernatant of parasite promastigotes is a good source of LPG, we made attempts to characterize functions of the culture supernatant, and membrane LPG isolated from metacyclic promastigotes of Leishmania major. The purification scheme included anion-exchange chromatography, hydrophobic interaction chromatography and cold methanol precipitation. The purity of supernatant LPG (sLPG) and membrane LPG (mLPG) was determined by SOS-PAGE and thin layer chromatography. The effect of mLPG and sLPG on nitric oxide (NO) production by murine macrophages cell line (J77 4.1 A) was studied. Both sLPG and mLPG induced NO production in a dose dependent manner but sLPG induced significantly higher amount of NO than mLPG. Our results show that sLPG is able to promote NO production by murine macrophages.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.6
• /
• pp.733-740
• /
• 2014

A resistive micro Pirani gauge using amorphous silicon (a-Si) thin membrane is proposed. The proposed Pirani gauge can be easily integrated with the other process-compatible membrane-type sensors, and can be applicable for in-situ vacuum monitoring inside the vacuum package without an additional process. The vacuum level is measured by the resistance changes of the membrane using the low noise correlated double sampling (CDS) capacitive trans-impedance amplifier (CTIA). The measured vacuum range of the Pirani gauge is 0.1 to 10 Torr. The sensitivity and non-linearity are measured to be 78 mV / Torr and 0.5% in the pressure range of 0.1 to 10 Torr. The output noise level is measured to be $268{\mu}V_{rms}$ in 0.5 Hz to 50 Hz, which is 41.2% smaller than conventional CTIA.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2501-2503
• /
• 1998

In this paper, the silicon-nitride membrane structure for IR sensor was fabricated through the etching and the direct bonding. The PTO layer as a IR detection layer was deposited on the membrane and its characteristics were measured. The attack of PTO layer during the etching of silicon wafer as well as the thermal isolation of the IR detection layer can be solved through the method of bonding/etching of silicon wafer. Because the PTO layer of c-axial orientation raised thermal polarization without polling, the more integration capability can be achieved. The surface roughness of the membrane was measured by AFM, the micro voids and the non-contacted area were inspected by IR detector, and the bonding interface was observed by SEM. The polarization characteristics and the dielectric characteristics of the PTO layer were measured, too.

• Journal of Sensor Science and Technology
• /
• v.18 no.5
• /
• pp.349-352
• /
• 2009

This paper describes the fabrication and characteristics of micro heaters built on AlN($0.1{\mu}m$)/3C-SiC($1{\mu}m$) suspended membranes by surface micromachining technology. In this work, 3C-SiC and AlN films are used for high temperature environments. Pt thin film was used as micro heaters and temperature sensor materials. The resistance of temperature sensor and the power consumption of micro heaters were measured and calculated. The heater is designed for operating temperature up to about $800^{\circ}C$ and can be operated at about $500^{\circ}C$ with a power of 312 mW. The thermal coefficient of the resistance(TCR) of fabricated Pt resistance of temperature detector(RTD)'s is 3174.64 ppm/$^{\circ}C$. A thermal distribution measured by IR thermovision is uniform on the membrane surface.

• Membrane and Water Treatment
• /
• v.14 no.3
• /
• pp.107-114
• /
• 2023

Graphene oxide (GO) membranes have attracted extensive attention in water treatment and related fields. However, GO films are unstable and have low permeability, which have hindered their further development. In this paper, a simple and effective method was used in which GO and single-layer graphene (GN) were mixed, and the layer spacing was effectively controlled by accurately controlling the ratio of GO to GN. GO-GN composite membranes have excellent stability, salt rejection (95.4%), and water flux (26 L m^-2 h^-1 bar^-1). This unique design structure can be used for precise and effective regulation of the layer spacing in GO, improving the rejection rate, and increasing water flux via the enhancement of low-friction capillary action. The rational development and use of this unique composite membrane provides a reference for the water treatment field.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.44-44
• /
• 2003

Growth mechanism of carbon nanotubes(CNTs) synthesized by chemical vapor deposition is abided by two growth modes. These growth modes are classified by the position of activated catalytic metal particle in the CNTs. Growth mode can be also affected by interaction between substrate and catalytic metal and induced energy such as thermal and plasma. We studied the reaction of catalytic metal to the substrate and growth mode of CNTs. Various substrates such as Si(100), graphite plate, coming glass, sapphire and AAO membrane are used to study the relation between catalytic metal and substrate in the synthesis of CNTs. For catalytic metal, thin film was deposited on various substrate via sputtering technique with a thickness of ∼20nm and magnetic fluids with none-sized particles were dispersed on AAO membrane. After laying process on AAO membrane, it was dried at 80$^{\circ}C$ for 8 hour. Synthesizing of CNTs was carried out at 900$^{\circ}C$ in NH3/C2H2 mixture gases flow for 10minutes.

• The Microorganisms and Industry
• /
• v.20 no.1
• /
• pp.50-52
• /
• 1994

Ultrastructural observations of mycelial and tissue phase with dimorphic fungal pathogen Coccidioides immitis were studied by electron microscopy of thin sections. 1. In mycelial phase of C.immitis contains normal cell components such as nucleus, mitochondria, endoplamsic reticulum, intracytoplasmic membrane system, cell wall and cell membrane as observed in the other encaryotic cells. 2. In tissue phase of C. immitis was larger than mycelial phase in cell size and observed much more vacuoles than mycelial phase. 3. In the contrast of mycelial phase of C. immitis, the tissue phase of cells were observed fibril form of capsular layer.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.1.1-1.1
• /
• 2011

Electrospinning has known to be very effective tool for production of versatile one-dimensional (1D) nanostructured materials such as nanofibers, nanorod, and nanotubes and for easily assembly to two-, three-dimensional(2D, 3D) nanostructures such as thin film, membrane, and nonwoven web, etc. We have studied on the electrospinning technology for novel energy storage and conversion materials such as advanced separator, dye sensitized solar cell, supercapacitor, etc. High heat-resistive nanofibrous membrane as a new separator for future lithium ion polymer battery was prepared by electrospinning of PVdF based composite solution. The novel nanofibrous composite nonwovens have tensile strength of above 50 MPa and modulus of above 1.3 GPa. The internal structure of the electrospun composite nanofiber with a diameter of few hundreds nanometer were composed of core-shell nanostructure. And also electrospun $TiO_2$ nanorod/nanosphere based dye-sensitized solar cells with high efficiency are successfully prepared. Some battery performance will be introduced.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.238-240
• /
• 1991

Langmuir-Blodgett(L.B) method is one of the most possible candidate for the fabrication of the micro scale memory or electrical devices. As for a fundamental study on the conduction mechanism in the organic thin membrane, N-alkyl quinolium-TCNQ complexes were synthesized and their physical properties were examined spectroscopically. LB film was produced by using Moving Wall Type LB Apparatus. The average area per molecule (N-docosylquinolium-TCNQ) was $67.97{\AA}^2$ which is ${\AA}^2$ larger than N-docosyl quinolium-TCNQ.

• Korean Journal of Microbiology
• /
• v.9 no.4
• /
• pp.169-174
• /
• 1971

Ultrastructural observations of mycelial and tissue phase with dimorphic fungal pathogen Coccidioides immitis were studied by electron microscopy of thin sections. 1. In mycelial phase of C.immitis contains normal cell components such as nucleus, mitochondria, endoplamsic reticulum, intracytoplasmic membrane system, cell wall and cell membrane as observed in the other encaryotic cells. 2. In tissue phase of C. immitis was larger than mycelial phase in cell size and observed much more vacuoles than mycelial phase. 3. In the contrast of mycelial phase of C. immitis, the tissue phase of cells were observed fibril form of capsular layer.