• 멤브레인
• /
• 제31권3호
• /
• pp.170-183
• /
• 2021

파울링은 멤브레인 성질의 효과를 저해한다는 점에서 큰 문제다. 멤브레인의 표면적인 특성에 파울링의 영향이 감소하는 문제를 해결하기 위해 다양하고 기발한 멤브레인의 패턴화가 제시되었다. 패턴화된 멤브레인의 진행 과정과 멤브레인의 파울링 효과의 분리 과정을 이 글을 통해 짚어보려 한다. 패턴화된 멤브레인의 효과를 최대한 활용하는 다양한 분리 과정을 분석해야 하는데 바로 나노여과, 역삼투, 미세여과, 한외여과, 투과증발이다. 이러한 분리 과정들을 사용하면 파울링 효과를 줄이는데 큰 효과가 있다는 점이 증명되었다. 또한, 패턴화된 멤브레인에 이로운 요소도 더해진다. 각각의 패턴화된 멤브레인과 분리 과정들은 플럭스, 염 제거율, 친수성 등에 대한 임계값을 구하는데 주목할 만한 결과가 나왔지만, 아직 파악되지 않은 부분을 확인할 필요도 있다. 본 총설에서는 분리공정을 위한 패턴화된 멤브레인의 효과에 대해 논의할 것이다.

• 한국물환경학회지
• /
• 제38권3호
• /
• pp.143-149
• /
• 2022

Membrane distillation (MD) has emerged as a sustainable desalination technology to solve the water and energy problems faced by the modern society. In particular, the surface wetting properties of the membrane have been recognized as a key parameter to determine the performance of the MD system. In this study, a novel surface modification technique was developed to induce a Janus-type hydrophilic/hydrophobic layer on the membrane surface. The hydrophilic layer was created on a porous PVDF membrane by vapor phase polymerization of the pyrrole monomer, forming a thin coating of polypyrrole on the membrane walls. A rigid polymeric coating layer was created without compromising the membrane porosity. The hydrophilic coating was then followed by the in-situ growth of siloxane nanoparticles, where the condensation of organosilane provided quick loading of hydrophobic layers on the membrane surface. The composite layers of dual coatings allowed systematic control of the surface wettability of porous membranes. By the virtue of the photothermal property of the hydrophilic polypyrrole layer, the desalination performance of the coated membrane was tested in a solar MD system. The wetting properties of the dual-layer were further evaluated in a direct-contact MD module, exploring the potential of the Janus membrane structure for effective and low-energy desalination.

• 멤브레인
• /
• 제32권6호
• /
• pp.390-400
• /
• 2022

나노여과막(NF)은 식품가공, 제약 등 폐수는 물론 지자체 하수처리시설에서 배출되는 폐수 처리에 있어 훨씬 낮은 압력으로 운용이 가능해 역삼투막(RO)보다 인기가 높다. NF막의 경우 분리 메커니즘은 투과확산 기작과 더불어 RO 박막보다 낮은 가교밀도로 인한 체거름 메커니즘이다. 막 오염은 세라믹 막과 달리 고분자 막의 경우 나노 여과 공정의 고질적인 문제 중 하나이다. 이러한 문제를 해결하기 위해 차아염소산나트륨을 사용한 멤브레인 세척이 이루어진다. 폴리머 멤브레인에 비해 세라믹 멤브레인은 이러한 화합물에 매우 안정적이다. 본 리뷰에서는 NF 프로세스에 의한 폐수 처리의 다양한 유형의 세라믹 막 적용에 대해 논의한다.

• Membrane and Water Treatment
• /
• 제15권4호
• /
• pp.163-176
• /
• 2024

Asymmetric flat sheet poly(vinylidene fluoride) (PVDF) membranes were fabricated using the phase inversion technique, employing four distinct solvents with varying solubility power: N, N-dimethylacetamide (DMAc), N, N-dimethylformamide (DMF), Dimethyl sulfoxide (DMSO), and N-Methyl-2-pyrrolidone (NMP). The influence of these solvents on the crystalline properties of the polymers was investigated using X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FT-IR) to elucidate their role in PVDF polymorphism during membrane formation. Our findings revealed significant variations in membrane crystalline phase due to the dissolution of PVDF in different solvents, with α-polymerization predominant in membranes cast with NMP and DMSO, while DMF and DMAc solvents favored β-type polymerization. Further, various additives including PEG-400, TiO2, LiCl, LiBr, acetone, ethanol, propanol, and water were employed to evaluate their impact on membrane morphology and properties. Scanning electron microscopy (SEM) and Ultimate testing machine (UTM) were utilized to analyze membrane morphology, while the tensile strength, contact angle, pore size, and porosity were estimated using the sessile drop method, imageJ, and gravimetric method, respectively. Our results demonstrated that all additives exerted influence on membrane morphology and properties depending on their characteristics and interactions with solvents and polymers. Notably, acetone, being volatile, facilitated the formation of a thin PVDF layer on the membrane surface, resulting in a reduced average pore size (0.18㎛). Conversely, LiCl and LiBr acted as pore-forming additives, yielding membranes with distinct pore characteristics and porosity. Moreover, water as a non-solvent additive induced pregelation during the nonsolvent-induced phase separation (NIPS) process, thereby promoting pore formation (53% porosity) and enhancing membrane hydrophobicity (104° contact angle). To evaluate the quality of synthesized membranes, permeate flux ranging from 16.2 L/m².hr to 27.9 L/m².hr with a salt rejection rate of 98 %, was evaluated using Vacuum Membrane Distillation (VMD).

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1996년도 가을 학술발표회 논문집
• /
• pp.11-18
• /
• 1996

Inelastic buckling stress of Welded Thin-Walled Steel Sections was investigated by - using Spline Finite Strip Method. Several types of membrane residual stress and nonlinear stress-strain relationship were considered to produce reasonable fits to test results. A simple formula for the inelastic local buckling stress of welded sections was also proposed and compared with Korean Standard Specifications for Highway Bridges.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 춘계학술대회 논문집
• /
• pp.248-251
• /
• 1996

Langmuir-Biodgett(LB) method is known as a unique method for preparing organic thin films, which can control thickness of the films in molecular level, and many kinds of ultra thin films of functional molecules have been prepared using this method. In this study, The organization of phospholipid monolayers on a water surface was investigated by means of displacement current measurement technique.

• 멤브레인
• /
• 제27권1호
• /
• pp.1-42
• /
• 2017

금속유기구조체(metal-organic framework)는 유기물와 무기물로 구성된 나노다공성 결정물질로서 일정한 세공 구조를 가지고 있다. 합성시 유기 리간드의 다양한 선택이 가능함으로 인해 다양한 세공 사이즈와 물리적/화학적 성질들을 나타내는 금속유기구조체가 가능하다. 이러한 특성들로 인해 다공성 금속유기구조체는 새로운 기체분리용 막 재료로 각광받고 있다. 그러나 고품질의 다결정 금속유기구조체막을 재조하는 것은 상당히 어려운 일인데, 이것은 지지체 표면에 금속유기구조체 결정을 자라게 하는 것이 쉽지 않기 때문이다. 지난 이십여 년 동안 마이크로 전자파를 이용한 물질 합성에 대한 연구가 상당히 진행되었는데 특히 마이크로 전자파를 이용하면 전통적인 합성법에 비해 금속유기구조체 분리막을 제조하는 과정에서의 어려움들을 극복할 수 있다. 마이크로 전자파를 이용한 다결정 분리막 제조 공정은 단시간 합성, 복잡한 구조체 합성 및 나노 결정체 합성 등의 장점이 있다. 본 총설에서는 금속유기구조체 분리막 제조 및 기체 분리에 관한 최근 연구성과들을 살펴보고 특히 마이크로 전자파를 이용한 분리막 제조 공정을 중심으로 정리한다.

• Structural Engineering and Mechanics
• /
• 제53권1호
• /
• pp.131-146
• /
• 2015

In the present paper a three-dimensional non-linear truss element and a short computer program for the modeling and predicting approximate lateral deflections in thin glass plates by the method of incremental loading are proposed. Due to the out-of-plane large deflections of thin glass plates compared to the plate thickness within each loading increment, the equilibrium and stiffness conditions are written with respect to the deformed structure. An application is presented on a thin fully tempered monolithic rectangular glass plate, laterally supported around its perimeter subjected to uniform wind pressure. The results of the analysis are compared with published experimental results and found to have satisfactory approximation. It is also observed that the large deflections of a glass plate lead to a part substitution of the bending plate behavior by a tensioned membrane behavior which is favorable.

• Journal of Welding and Joining
• /
• 제27권5호
• /
• pp.74-80
• /
• 2009

The membrane of the LNG carriers consists of thin strips of INVAR(Fe-36%Ni) steel plates, and the junction between INVAR strips is fabricated by welding. Thousands of the raised edge joints, regularly spaced, are located around all the side of the tank corner near the transverse bulkhead, and TIG welding is manually made on the top of the raised edges. Since the thickness of all the laminated edge plies is extremely thin and the weld position is under a bad accessibility, highly skilled workers are required to perform welding relatively for a long welding time. An alternative scheme for the corner membrane fabrication is proposed in the study to improve the installation workability and thus productivity. The scheme replaces the welded edges with the preformed corrugation ones. A panel strip with regularly-spaced corrugations is installed at the corner instead of the individual flat strip of which edge is vertically raised to be welded with the adjacent strip. In the study, a series of the evaluation on the corrugated edge members was performed to assess the applicability to the real LNG carrier fabrication. Opening displacement at the raised edge was experimentally examined. Elastic stiffness regressed from the displacement was nearly same in both edge types. Edge displacement and local stresses were calculated under hydrostatic pressure and temperature change due to liquefied cargo. Fatigue test was performed on both corrugated and welded edge specimens consisting of two or five plies of invar strips. Fatigue strength of the corrugated specimens was not less than that of the welded specimens.

• 한국표면공학회지
• /
• 제54권1호
• /
• pp.25-29
• /
• 2021

The fabrication of nanopore membrane by deposition of Al2O3 film using electron-beam evaporation, which is fast, cost-effective, and negligible dependency on substance material, is investigated for potential applications in water purification and sensors. The decreased nanopore diameter owing to increased wall thickness is observed when Al2O3 film is deposited on anodic aluminum oxide membrane at higher deposition rate, although the evaporation process is generally known to induce a directional film deposition leading to the negligible change of pore diameter and wall thickness. This behavior can be attributed to the collision of evaporated Al2O3 particles by the decreased mean free path at higher deposition rate condition, resulting in the accumulation of Al2O3 materials on both the surface and the edge of the wall. The reduction of nanopore diameter by Al2O3 film deposition can be applied to the nanopore membrane fabrication with sub-100 nm pore diameter.