• Korean Journal of Materials Research
• /
• v.17 no.4
• /
• pp.236-238
• /
• 2007

[ 0-3PbTiO_3/P$ ](VDF/TrFE) nanocomposites thin films for passive pyroelectric infrared sensor have been fabricated by two-step spin coating technique. 65 wt% VDF and 35 wt% TrFE was formed to a P(VDF/TrFE) poder Nano size $PbTiO_3$ powder was used. 0-3 connectivity of $PbTiO_3$(VDF/TrFE) composites film is achieved and also observed by SEM photography successfully. The dielectric constant, and pyroelectric coefficient measured and compared with P (VDF/TrFE). A very low dielectric constant (13.48 at 1 kHz) and high enough pyroelectric coefficient (3.101 $nC/cm^2$.k at $50^{circ}C$) neasured. This nanocomposites can be used for a new pyroelectric infrared sensor for better performance.

• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1274-1276
• /
• 1994

A study on $BaTiO_3$ ceramics have been shown that dielectric properties of $BaTiO_3$ ceramics strongly depend on the size and ferroelectric domain density of the constituting grain. According to rising substrate temperature from $25[^{\circ}C]$ to $600[^{\circ}C]$, the peak intensity and crystal plane in XRD are increased. In this study, $BaTiO_3$ thin film prepared by RF sputtering from room temperature to $600[^{\circ}C]$ of substrate temperature. Therefore, we tried to investigate the relation between the characteristics of ceramics structure and dielectric factor.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1754-1756
• /
• 2000

Organic semiconductors based on fused-ring polycyclic aromatic hydrocarbon have great potential to be utilized as an active layer for electronic and optoelectronic devices. In this study, pentacene thin films and electrode materials were deposited by Organic Molecular Beam Deposition(OMBD) and vacuum evaporation respectively. For the gate dielectric, polyamic acid was spin-coated and cured into polyimide at 350$^{\circ}C$. Electrical characteristics of the devices were investigated, where the channel length and width was 50${\mu}m$ and 5mm. It was found that field effect mobility was 0.012$cm^{2}/Vs$, and on/off current ratio was $10^5$.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.3
• /
• pp.87-95
• /
• 1992

The electrical characteristics of Al/TaS12TOS15T/SiOS12T/Si metal insulator-semiconductor (MIS) capacitors were studied. Tantalum pentoxide thin films on SiOS12T/p-Si substrate have been prepared by thermal oxidation at 450-$600^{\circ}C$ of sputter deposited tantalum films. Composition and structures of the tantalum oxide films were examined by AES and XRD. From the C-V analysis, dielectric constant of TaS12TOS15T which were oxidized at 55$0^{\circ}C$ for 1h in OS12T were 18-23, the value depending on the oxidation and annealing temperature. The leakage current density was found to be about 10S0-10T-10S0-9T A/cmS02T at an applied electric field of 1 MV/cm. The dielectric breakdown strength of the tantalum oxide films annealed at 100$0^{\circ}C$ were in the range from 2.5MV/cm to 2.8 MV/cm.

• Proceedings of the KIEE Conference
• /
• 1987.07a
• /
• pp.542-545
• /
• 1987

THE ELECTRICAL CHARACTERISTICS Of RAPID THERMAL OXIDES AND NITRIDED OXIDES HAVE BEEN INVESTIGATED. R.T.OXIDE FILMS HAVE BEEN PREPARED BY ONLY R.T. OXIDATION OR R.T.OXIDATION AND SUBSEQUENT R.T.ANNEAL. NITRIDED OXIDE FILMS HAVE BEEN PREPARED BY R.T.OXIDATION AND SUBSEQUENT R.T.NITRIDATION.AND CONVENTIONAL OXIDES ALSO HAVE BEEN PREPARED TO COMPARE WITH R.T.P OXIDES. R.T.ANNEALED OXIDES SHOW EXCELLENT BREAKDOWN FIELD. LEAKAGE CURRENT AND TDDB CHARACTERISTICS. ALSO, CAPACITANCE Of R.T NITRIDED OXIDES ARE SUPERIOR BY 10% TO CONVENTIONAL OXIDES, BUT TDDB CHARACTERISTIC ARE POORER THAN OXIDE FILMS.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.311-314
• /
• 1999

Ferroelectric PZT heterolayered thin films were fabricated by spin coating method on the Pt/Ti/SiO$_2$/Si substrate using PZT(10/90) and PZT(90/10) metal alkoxide solutions. All PZT heterolayered films showed a homogeneous grain structure without presence of the rosette structure. It can be assumed that the lower PZT layers a role of nucleation site or seeding layer for the formation of the upper PZT layer. Zr and Ti diffusion into the Pt electrode were mainly distributed at the surface of Pt electrode beneath the PZT/Pt interface. The PZT/Pt interfacial layer showed a microstructure characterized by a grain phase surrounded by a Pb-deficient pyrochlore matrix phase. The relative dielectric constant and the dielectric loss of the PZT-6 film were 567 and 3.6, respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.10
• /
• pp.850-853
• /
• 2009

We have optimized the device structure by using the dielectric layer such as anti-reflection thin film to improve the emitting efficiency of white organic light emitting device (WOLED). Basically, dielectric layer with anti-reflection characteristics can enhance the emitting efficiency of WOLED by compensating the refractive index of organic layer, ITO, and Glass. Here, WOLED was designed and optimized by Macleod simulator. The refractive index of 1.74 was calculated for Dielectric layer and was selected as $TiO_2$. The optimal thicknesses of $TiO_2$ and ITO were 119.3 and 166.6 nm, respectively, at the wavelength of 600 nm. The transmittance of ITO was measured with the thickness variation of dielectric layer and ITO in Organic layer/ITO/Dielectric layer structure. The transmittance of ITO was 95.17% and thicknesses of $TiO_2$ and ITO were 119.3 and 166.6 nm, respectively. This result, calculated and measured values were coincided.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1771-1773
• /
• 1999

Ferroelectric PZT(10/90)/(90/10)heterolayered thin films were fabricated by the alkoxide-based Sol-Gel method Electric and dielectric properties of PZT(10/90)/(90/10) heterolayered thin films have been investigated, focusing on the effect of PZT/PZT and PZT/electrode interface on the heterolayered films. Dielectric constant increased with increasing the number of coatings. Increasing the number of coatings, remanent polarization and coercive field were decreased and the values of the PZT-6 heterolayered thin films deposited on Pt/Ti/$SiO_2$/Si were $7.18{\mu}C/cm$, $68.5kV/cm^2$, respectively. Leakage current, densities were increased with increasing the number of coatings, and the value of the PZT-4 film deposited on the Pt/Ti/$SiO_2$/Si substrate was about $7{\times}10^{-8}A/cm^2$ at 0.05MV/cm.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.3 s.36
• /
• pp.235-241
• /
• 2005

Incorporation of solid electrodes frequently involves plasma-based processing. The effect of plasma can influence the physical characteristics, depending on the magnitude in plasma. The undesired feature of plasma-induced damage should be prevented in characterizing the ultra-thin materials, such as ultra-thin films and organic monolayers. The current work at first proves the applicability of a liquid phase electrode in the electrical/dielectric properties through comparative work using Al and Hg on ultrathin $Al_2O_3$ films deposited through atomic layer deposition at low temperature: Two types of metals such as Aluminum (Al) and mercury (Hg) were used as electrodes in $Al_2O_3$ thin films in order to investigate the effect of electrode preparation on the current-voltage characteristics and impedance features as a function of thickness in $Al_2O_3$ film thickness. The success of Hg in $Al_2O_3$ thin films is applied to the AC and DC characterization of the organic monolayers obtained using the Langmuir-Blodgett method. From the DC current-voltage characteristics, the diode-like response is found to originate from the bulk response of the organic materials, evidenced by the fact and the capacitance is inversely related to the absolute thickness of organic layers.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.291-293
• /
• 1997

In this study, Sol-Gel derived $(Ba_{0.7}Sr_{0.3})TiO_3$ thin films were fabricated and investigated. The stock solution was synthesized and spin-coated on Pt/Ti/$SiO_2$/Si substrate at 4000(rpm] and then, annealed at $650{\sim}750[^{\circ}C]$. Crystallization condition, microstructural properties and interfacial structure were observed by XRD, AFM, SEM and TEM. It was found that the BST thin films were completely crystallized at 750[$^{\circ}C$] and showed nano-sized grains. The dielectric constant and loss of the BST thin films were 220, 0.01 at 1[kHz] respectively. Increasing the temperature, the dielectric constant and loss characteristics were not varied widely. At the applied voltage of 1.5[V], the leakage current density was under the $10^{-9}[A/cm^2]$.