• Journal of Life Science
• /
• v.21 no.12
• /
• pp.1732-1739
• /
• 2011

This study was carried out to investigate the effect of lotus root and leaf powder on the quality characteristics of pork patty stored at $3^{\circ}C$ for 9 days. The pork patties were of four types: nothing added(control, T0), 0.5% lotus root powder added (T1), 0.25% lotus root and 0.25% lotus leaf powder added (T2), and 0.5% lotus leaf powder added (T3). The $a^*$ value tended to decrease with longer storage period (p<0.05). The $L^*$ and $a^*$ value of T3 had the lowest value among the samples, the $b^*$ value T2 and T3 were higher than those of T0 and T1 (p<0.05). Water holding capacity decreased with longer storage period (p<0.05), the water holding capacity, cooking loss, increase rate of thickness and decrease rate of diameter were not significantly different among the samples. Hardness and chewiness increased and springiness decreased with longer storage period (p<0.05). The pH creased with longer storage period (p<0.05), but the VBN content not changed during storage. The TBARS values increased with longer storage period (p<0.05), and those of T0, T1, T2 and T3 were 4.57, 1.85, 0.43 and 0.41 mg MA/kg, respectively, after 9 days of the storage. The result suggest that the addition of lotus root and leaf powder at the same time, or addition of lotus leaf powder can be applied to pork patty to its functionality.

• Journal of Life Science
• /
• v.22 no.10
• /
• pp.1392-1398
• /
• 2012

This study investigated the effects of diet of different forages on growth performance and carcass characteristics of Hanwoo steers. Twenty-one Hanwoo steers were randomly allocated to three groups (fed hay, reed, and reed with rice straw) of seven steers each. Initial and final body weights of control, T1, and T2 groups were 125.5, 128.3, 128.3 kg and 697.4, 614.6, 706.7 kg, respectively. Average daily gain tended to increase in controls (0.70 kg/d) and the T2 group (0.71 kg/d) but not as much in the T1 group (0.60 kg/d); however, there was no significant difference. DMI was not significantly different among the treatment groups, but T1 was relatively lower than the other groups. For the yield traits, carcass weight was not significantly different between controls and the T2 group but was greater in the T2 group compared to the T1 group (p<0.05). Back fat thickness and rib eye area were higher in controls and T2 compared to T1; yield grade (A:B:C, %) was greater in T1 (43:57:0) compared to the other groups (control 0:71:29; T2 29:42:29). For the quality traits, fat color and texture were not significantly different among groups. However, meat color and maturity were significantly greater in T1 compared to T2 (p<0.05). Marbling score and appearance rate of over 1st meat quality grade were greater in the control and T2 groups compared to the T1 group. Based on the results, growth performance, feed utilization, and carcass traits appeared to improve when roughage containing rice straw plus reed was offered. Therefore, reed is worth considering as a roughage source for fattening Hanwoo steers.

• Journal of Korean Society of Forest Science
• /
• v.103 no.1
• /
• pp.65-71
• /
• 2014

Cacalia firma is a perennial plant in Asteraceae, Parasenecio that distributed in Korea, China, and Japan. As dietary style changes for well-being life, consumer's demand of functional food and organic vegetables is getting increased. This study was conducted to investigate the optimum light conditions of P. firmus in forest farming. One year old seedlings were grown under four different light conditions 10%, 20%, 30%, and 50% of sunlight by shading (equals 50%, 30%, 20%, and 10% relative brightness respectively) and non-treated control under full sunlight. They were analyzed for early growth and physiological response. Seedlings grown under 75% shading showed similar height, root growth, and leaf water content to control. However, their leaf length, width, and total leaf area were increased, which caused increased leaf dry weight and total dry weight. Especially, seedlings under 95% shading showed 40% increase in height and more leaf growth and leaf water content, although they had shorter main root length and root collar diameter than control. In addition specific leaf area (SLA) and leaf area ratio (LAR) were higher than control and indicated that they were statistically significant difference from control. Higher SLA refers thinner leaf thickness, higher LAR means larger leaf area. The results indicate seedlings under 95% shading have higher water content, thinner leaf, and wider lightinterception areas. It is plausible that P. firmus is active in chlorophyll activities and carbon dioxide assimilation at even lower light conditions. These results suggest that the optimum light level of P. firmus for artificial cultivation in forest farming ranges from 75~95% shading (20%-10% of relative brightness). When salability as 'sanchae' (wild edible greens) is considered, P. firmus could be cultivated under 75% shading in forest farming and expected to have better taste and higher yield. We suggest these results as basic data of P. firmus for possible forest farming.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2000.11a
• /
• pp.3-4
• /
• 2000

Many researchers are interested in the synthesis and characterization of carbon nitride and diamond-like carbon (DLq because they show excellent mechanical properties such as low friction and high wear resistance and excellent electrical properties such as controllable electical resistivity and good field electron emission. We have deposited amorphous carbon nitride (a-C:N) thin films and DLC thin films by shielded arc ion plating (SAIP) and evaluated the structural and tribological properties. The application of appropriate negative bias on substrates is effective to increase the film hardness and wear resistance. This paper reports on the deposition and tribological OLC films in relation to the substrate bias voltage (Vs). films are compared with those of the OLC films. A high purity sintered graphite target was mounted on a cathode as a carbon source. Nitrogen or argon was introduced into a deposition chamber through each mass flow controller. After the initiation of an arc plasma at 60 A and 1 Pa, the target surface was heated and evaporated by the plasma. Carbon atoms and clusters evaporated from the target were ionized partially and reacted with activated nitrogen species, and a carbon nitride film was deposited onto a Si (100) substrate when we used nitrogen as a reactant gas. The surface of the growing film also reacted with activated nitrogen species. Carbon macropartic1es (0.1 -100 maicro-m) evaporated from the target at the same time were not ionized and did not react fully with nitrogen species. These macroparticles interfered with the formation of the carbon nitride film. Therefore we set a shielding plate made of stainless steel between the target and the substrate to trap the macropartic1es. This shielding method is very effective to prepare smooth a-CN films. We, therefore, call this method "shielded arc ion plating (SAIP)". For the deposition of DLC films we used argon instead of nitrogen. Films of about 150 nm in thickness were deposited onto Si substrates. Their structures, chemical compositions and chemical bonding states were analyzed by using X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy and infrared spectroscopy. Hardness of the films was measured with a nanointender interfaced with an atomic force microscope (AFM). A Berkovich-type diamond tip whose radius was less than 100 nm was used for the measurement. A force-displacement curve of each film was measured at a peak load force of 250 maicro-N. Load, hold and unload times for each indentation were 2.5, 0 and 2.5 s, respectively. Hardness of each film was determined from five force-displacement curves. Wear resistance of the films was analyzed as follows. First, each film surface was scanned with the diamond tip at a constant load force of 20 maicro-N. The tip scanning was repeated 30 times in a 1 urn-square region with 512 lines at a scanning rate of 2 um/ s. After this tip-scanning, the film surface was observed in the AFM mode at a constant force of 5 maicro-N with the same Berkovich-type tip. The hardness of a-CN films was less dependent on Vs. The hardness of the film deposited at Vs=O V in a nitrogen plasma was about 10 GPa and almost similar to that of Si. It slightly increased to 12 - 15 GPa when a bias voltage of -100 - -500 V was applied to the substrate with showing its maximum at Vs=-300 V. The film deposited at Vs=O V was least wear resistant which was consistent with its lowest hardness. The biased films became more wear resistant. Particularly the film deposited at Vs=-300 V showed remarkable wear resistance. Its wear depth was too shallow to be measured with AFM. On the other hand, the DLC film, deposited at Vs=-l00 V in an argon plasma, whose hardness was 35 GPa was obviously worn under the same wear test conditions. The a-C:N films show higher wear resistance than DLC films and are useful for wear resistant coatings on various mechanical and electronic parts.nic parts.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.3
• /
• pp.275-280
• /
• 2011

BACKGROUND: The present study was conducted to find out the suitable method for organic rice production on the basis of different seedling raising methods at nine eco-friendly agricultural units of Samgi, Mangsung, Iksan and Sungsan, Gusan of Jeollabuk-do, during 2009-10. METHODS AND RESULTS: On the basis of yield and physiological parameters, pot seeding method was found to be superior to drill seeding and broadcast seeding methods. The number of panicle, grain, the precent of ripened grains, and the 1,000 grain weight, were better in pot seeding method. Maximum yield and other attributes were recorded in rice, cultivated with seedlings raised by pot and broadcast seeding method. Number of panicle/hill and grain/panicle was 10.4% and 35.1% higher than the broadcast seeding method, respectively. Yield also showed 8.8% increase in pot seeding method as compare to broadcast seeding method. Higher grain yield was obtained when 56 hills/$3.3m^2$ of rice seedlings were used as compare to 50 hills/$3.3m^2$ raised by pot seeding method and 70 hills/$3.3m^2$ of broadcast seeding method. Lodging was minimum in seedlings raised with pot seeding method as thickness of third internode was more (9.0%) than the seedlings, raised with broadcast seeding method. Root length and dry weight also showed similar tendency i.e. 13.8% and 25.3% higher, respectively. CONCLUSION(s): Quality and grade of rice, cultivated with pot seeding method was better than broadcast seeding method. Head rice was 4.4% higher; and protein content and broken rice grown by pot seeding method were 0.4% and 1.8% lower than broadcast seeding method, respectively.

• Journal of Animal Science and Technology
• /
• v.46 no.5
• /
• pp.811-820
• /
• 2004

Objectives of this study was to determine the comparisons of physico-chemical characteristics in crossbred pigs(Korean native breed ${\times}$ Landrace breed) by feeding periods. A total of 150 pigs were sampled from commercial farm, and assigned into three treatedrnents. Feeding peirods of Tl, T2 and T3 were below 200 days, 220-220 days, over 220 days, respectively. Live weight, carcass weight and backfat thickness were significantly(P<0.05) increased with feeding period increased, and final grade score have significantly(P<0.05) lower when feeding period was increased. pH and water content were significantly(P<0.05) lower when feeding period was increased(over 220days). However, intramuscular fat have no significantly different among the treatments. $L^* and b^* were significantly(P<0.05) lower and a^*$ was significantly higher(P<0.05) when feeding period increased. Cooking loss was higher in the order of Tl > T3 > T2. Shear force values was significantly(P<0.05) decreased by feed period increase. In fatty acids, myristic acid, palmitic acid, stearic acid and saturated fatty acid(SFA) in T2 were significantly(P<0.05) lower in T2, whereas linolenic acid, unsaturated fatty acid(UFA), essential fatty acid(EFA), UFA/SFA and EFA/SFA were significantly higher in T2 compared with other treatment. However palmitoleic acid and arachidonic acid were no significantly different with feeding periods. As a result of this study, crossbred pigs was increased live weight and carcass weight with feeding periods. and improved meat color and tenderness with feeding periods. However, final grade score was decreased with feeding periods

• Journal of Bio-Environment Control
• /
• v.14 no.2
• /
• pp.83-88
• /
• 2005

A study was conducted on three pollination methods on oriental melon(sageageol-ggul) grafting with pumpkin(seongjutozoa) for the labor-saving and to improve fruit set. Fruit weight, flesh thickness and fruit setting rate of oriental melon were greater in growth regulators treatment than those of pollinated by bees. Sugar content and hardness of fruits pollinated by bees were higher than those of by growth regulators. From the last ten days of the February to the first ten days of the March, fruit setting rate was $95\%$ in fruit setting growth regulators, whereas it was $46\%$ and $45\%$ in pollinated by honey and bumble bee, respectively. After the middle of March, the percentage of fruit setting was >$98\%$ in all the pollination methods. The cultivation under plastic houses of oriental melon, suitable fruiting time far the pollination by bees was decided after middle days of the March. Chromaticity and especially the value of 'a' of fruit of oriental melon pollinated by bees were higher than those of growth regulators. The percentage of fermented fruits of bee pollinated and growth regulators treated was $6.7\~9.1\%\;and\;28.1\%$, respectively. The weight of 100 seeds of bees pollinated were higher than that of growth regulators. The more increased the weight of 100 seeds the less appeared the rate of fermented fruits. The percentage of marketable fruits of the honey and bumble bee pollinated and that of growth regulators treated was $82\%,\;80.3\%\;and\;62.5\%$, respectively. The decreasing rate of fruit weight during storage of bees pollinated was less than those of growth regulators. In these results, the introduction of honey bee and bumble bee for the pollination of oriental melon was able to labor-saving of fruit set and increase of fruit quality.

• Korean Journal of Poultry Science
• /
• v.30 no.2
• /
• pp.83-90
• /
• 2003

This study was conducted to determine the effects of stocking density on performance and physiological responses of egg-type breeder layers in cages. A total of 264 Hy-Line Brown egg-type breeder layers at the age of 32 weeks were divided into 4 groups with 3 replicates of 22 birds (20 females, 2 males) per replicate and assigned to four stocking density treatments with 22 birds per cage with different sizes (980, 735, 640 and 560 $\textrm{cm}^2$/bird). The birds were fed the same experimental diet ad libitum for 12 weeks, and laying performance, egg and eggshell qualities, fertility and hatchability were determined. At the end of the experimental period, 9 birds were selected in each treatment in order to measure the scores of plumage condition. Antibody titers to Newcastle disease and infectious bronchitis were also determined. No significant differences were observed in laying performances, eggshell strength, Haugh unit, fertility and hatchability among the treatments. In birds housed 640 $\textrm{cm}^2$ per bird, eggshell thickness were significantly lower (P<0.05) than those of the other groups from 7 to 12 weeks. There was no significant difference in antibody titers to Newcastle disease. In birds housed 980 $\textrm{cm}^2$ per bird, antibody titers to infectious bronchitis were significantly (P<0.05) higher than those of the other groups. With increase in the level of stocking density, the scores of plumage condition were also significantly decreased (P<0.01). This study demonstrated that moderate increment of stocking density did not resulted in reduction in laying-performances of egg-type breeder layers. However, it seemed that the higher stocking density might give more stress to the birds from physical stimuli and thus were harmful environment causing higher mortalities compared to the lower ones.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.26 no.4
• /
• pp.211-219
• /
• 2006

The UET(ultrasound excited thermography) for the ,eat-time diagnostics of the object employs an infrared camera to image defects of the surface and subsurface which are locally heated using high-frequency putted ultrasonic excitation. The dissipation of high-power ultrasonic energy around the feces of the defects causes an increase In temperature. The defect's image appears as a hot spot (bright IR source) within a dark background field. The UET for nondestructive diagnostic and evaluation is based on the image analysis of the hot spot as a local response to ultrasonic excited heat deposition. In this paper the applicability of VET for fast imaging of defect is described. The ultrasonic energy is injected into the sample through a transducer in the vertical and horizontal directions respectively. The voltage applied to the transducer is measured by digital oscilloscope, and the waveform are compared. Measurements were performed on four kinds of materials: SUS fatigue crack specimen(thickness 14mm), PCB plate(1.8 mm), CFRP plate(3 mm) and Inconel 600 plate (1 mm). A high power ultrasonic energy with pulse durations of 250ms Is injected into the samples in the horizontal and vertical directions respectively The obtained experimental result reveals that the dissipation loss of the ultrasonic energy In the vertical injection is less than that in the horizontal direction. In the cafe or PCB, CFRP, the size of hot spot in the vortical injection if larger than that in horizontal direction. Duration time of the hot spot in the vertical direction is three times as long as that in the horizontal direction. In the case of Inconel 600 plate and SUS sample, the hot spot in the horizontal injection was detected faster than that in the vertical direction

• Food Science of Animal Resources
• /
• v.30 no.3
• /
• pp.495-503
• /
• 2010

Analyses were conducted to estimate the effect of quality grade on the carcass characteristics, physico-chemical and sensory traits of Longissimus dorsi in Hanwoo. A total of 42,113 carcasses were selected on the basis of five quality grades (grade $1^{++}$, $1^+$, 1, 2, and 3) and an additional 258 samples of Longissimus dorsi were used to evaluate the beef quality. The increase in quality grade from grade 3 to grade $1^{++}$ was significant (p<0.05) for carcass weight (from 338.7 kg to 387.2 kg), backfat thickness (from 7.45 mm to 12.23 mm) and marbling score (from 1.09 to 8.31). In contrast, significantly decreased levels of meat color, fat color, texture and maturity were apparent with increasing quality grade (p<0.05). Increasing quality grade was also correlated with significant increases (p<0.05) in crude fat contents (from 3.57% to 25.68%) and water holding capacity (from 52.41% to 58.03), and a decrease of the Warner-Bratzler shear force from 8.29 kg to 2.83 kg. The highest $L^*$ value (41.53) and highest cooking loss (22.11%) were observed with grade $1^{++}$ and 3 beef, respectively. There was no difference observed on $pH_{24}$ (5.53 to 5.66) among the quality grades, which were within the normal range. Sensory evaluation experiments revealed that quality grades were associated with significantly altered (all p<0.05) tenderness, juiciness, flavor, and overall acceptability. The crude fat contents showed significant correlation with juiciness (r=0.59), tenderness (r=0.71), flavor (r=0.55), and overall acceptability (r=0.69). The lower sensory trait scores were related to higher WBs. Grade $1^+$ Hanwoo beef had a significantly higher WBs and lower fat contents when compared to grade $1^{++}$ Hanwoo beef (p<0.05).