• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.3
• /
• pp.160-169
• /
• 2019

Purpose: The purpose of this study was to evaluate the antimicrobial effects of a toothbrush with light-emitting diodes (LEDs) on periodontitis-associated dental biofilm attached to a zirconia surface by static and dynamic methods. Materials and Methods: Zirconia disks (12 mm diameter, 2.5 mm thickness) were inserted into a 24-well plate (static method) or inside a Center for Disease Control and Prevention (CDC) biofilm reactor (dynamic method) to form dental biofilms using Streptococcus gordonii and Fusobacterium nucleatum. The disks with biofilm were subdivided into five treatment groups-control, commercial photodynamic therapy (PDT), toothbrush alone (B), brush with LED (BL), and brush with LED+erythrosine (BLE). After treatment, the disks were agitated to detach the bacteria, and the resulting solutions were spread directly on selective agar. The number of viable bacteria and percentage of bacterial reduction were determined from colony counts. Scanning electron microscopy (SEM) was performed to visualize alterations in bacterial morphology. Results: No significant difference in biofilm formation was observed between dynamic and static methods. A significant difference was observed in the number of viable bacteria between the control and all experimental groups (P < 0.05). The percentage of bacterial reduction in the BLE group was significantly higher than in the other treated groups (P < 0.05). SEM revealed damaged bacterial cell walls in the PDT, BL, and BLE groups, but intact cell walls in the control and B groups. Conclusion: The findings suggest that an LED toothbrush with erythrosine is more effective than other treatments in reducing the viability of periodontitis-associated bacteria attached to zirconia in vitro.

• Journal of Korean Society of Forest Science
• /
• v.108 no.3
• /
• pp.290-295
• /
• 2019

This study was carried out to investigate the possibility of establishing a reproductive system for the seed of Pedicularis hallaisanensis, which is in the endangered wild species II class in Korea. The seed of P. hallaisanensis is egg-shaped, and the seed coat is dark brown. The embryo was identified as a dwarf type by the seed section. The seed length was $0.47{\pm}0.07mm$, width $0.16{\pm}0.006mm$, and thickness $0.12{\pm}0.01mm$. The weight of one seed was $0.0003{\pm}0.0001mg$, and 1000 seeds weighed $4.59{\pm}0.02mg$. The degree of seed viability was 75.33% by the tetrazolium (TZ) assay. The highest germination rate of P. hallaisanensis seed was 71% after 4 weeks of storage at $4^{\circ}C$. However, the germination rate tended to decrease gradually over a longer storage period. The germination rates after 6 or 8 weeks of storage at $4^{\circ}C$ were 64% and 60%, respectively. We used two host plants, Artemisia princeps and Dendranthema zawadskii, to determine the effect of host plants on P. hallaisanensis seed germination. The germination of P. hallaisanensis mixed with A. princeps or D. zawadskii started at 53.5 and 62.5 days after sowing, respectively. We did not find any germination 164 days postsowing with both host plants. When A. princeps and D. zawadskii were used as host plants for P. hallaisanensis seed germination, P. hallaisanensis seed germination rates were 45.5% and 19.5%, respectively. The average time to germination was 70.2 days for A. princeps, and 46.8 days for D. zawadskii.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.41 no.4
• /
• pp.273-279
• /
• 2021

This study was carried out to investigate the effects of a dietary addition of red ginseng marc, mineral^® and black sugar^® on the dry matter intake, daily gain, yield grade and quality grade of Holstein steers(Bos taurus). A total of 32 fattening Holstein steers(avg. BW 590kg) were assigned to four treatments which included a control diet(mixed concentrate and forage; namely, C) and three treatments diet(T1; control diet+red ginseng marc 200g, T2; control diet+red ginseng marc 100g+mineral 50g, T3; control diet+mineral 50g+ black sugar 20g). The results are summarized as follows; the total feed intake and daily feed intake were significantly(p<0.05) higher in T2 and T3 than in the other two treatments(C and T1). The daily gain was higher in T2 than in the other treatments, but there was no significant difference. The back fat thickness, longissimus muscle area and meat yield grade were no significant difference. The marbling score showed significantly(p<0.05) higher in order of T3(4.5) > T1(4.0) > T2(2.7) > C(2.5). The meat color, fat color, texture and maturity were no significant difference. The quality grade was higher in T3 than in the other treatments(C, T1 and T2), but there was no significant difference. T3, which numerically had a higher daily gain and carcass quality grade, showed higher economic efficiency, whereas C showed low economic efficiency. Based on the above results, T3 treatment compared to the other treatments improved the daily gain, carcass quality grade and economic efficiency.

• Journal of Life Science
• /
• v.32 no.7
• /
• pp.532-541
• /
• 2022

Obesity induced by high-fat diet (HFD) is verified as a strong risk factor and negative prognostic factor for prostate cancer in several genetically engineered mice although it was not examined in the normal mice. To investigate whether HFD-induced obesity can affect the development and progression of cancer in the prostate of normal mice, alterations in the weight and histological structure of the prostate as well as the expression of cancer-related proteins were analyzed in obese C57BL/6N mice fed with 60% HFD for 16 weeks. First, HFD-induced obesity, including an increase in organ weight, body weight, fat accumulation, and serum lipid profile, was successfully induced in C57BL/6N mice after HFD treatment. The total weight of the prostate significantly increased HFD-induced obesity in the model mice compared with the control group. Among the four lobes of the prostate, the weight of the ventral prostate (VP) and anterior prostate (AP) were higher in HFD-induced obesity model mice than in the control group, although the weights of the lateral prostate (DLP) and seminal vesicle (SV) were constantly maintained. In addition, the incidences of hyperplasia and non-hodgkin's lymphoma (NHL) in the histological structure were remarkably increased in HFD-induced obesity model mice, while the epithelial thickness was higher in the same group. A significant increase in the phosphorylation levels of key proteins in the AKT (protein kinase B) signaling pathway was detected in HFD-induced obesity model mice. Therefore, these results suggest that HFD-induced obesity can promote hyperplasia and NHL in the prostates of C57BL/6N mice through the activation of the AKT signaling pathway.

• Korean Journal of Food Science and Technology
• /
• v.53 no.4
• /
• pp.399-407
• /
• 2021

Wrinkle formation and dryness are the most well-known symptoms of skin aging. This study investigated skin anti-aging and moisturizing effects of Mugunghwa (Hibiscus syriacus L.), the national flower of Korea. The effect of H. syriacus L. flower extract was examined in skin cells originating from humans in vitro and in hairless mice exposed to UVB in vivo. The in vivo study results showed that skin hydration-related factors such as involucrin, filaggrin, HAS1, HYAL1, and matrix metalloproteinase-I (a primary skin photoaging factor) were regulated by H. syriacus L. Additionally, epidermal thickness and collagen disruption, which resulted in wrinkle formation and skin dryness, were ameliorated by oral administration of H. syriacus L. These results indicate that H. syriacus L. flowers can play important roles in preventing aging and promoting skin moisturizing.

• Korean Journal of Poultry Science
• /
• v.49 no.4
• /
• pp.181-188
• /
• 2022

This study was conducted to investigate the effects of the metabolic energy levels of Korean native chicken breeder diets on laying performance, egg quality, fertility and hatchability. On the basis of dietary metabolic energy values (2,800, 2,700, and 2,650 kcal/kg), 168 twenty-week-old 'Woorimatdag' breeders (maternal line) were divided into three treatment groups (four replications per treatment with each replicate containing 14 birds) and reared until 32 weeks of age. We found that the body weight of hens increased with age, although there were no significant differences among treatments with respect to body weight or egg weight. Egg production ratio at 20-24 and 24-28 weeks of age tended to be low in birds fed the 2,700 and 2,650 kcal/kg diets, although the differences among treatments were none significant. Feed intakes was significantly decreased as the metabolic energy level reduced (P<0.05). There were no significant differences among treatments with respect to feed conversion ratio or the strength and thickness of eggshell. Similarly, we detected no significant differences among the three metabolic energy levels with regards to fertility, hatchability, or chick weight. In conclusion, our findings indicate that during the initial phase of laying, the metabolic energy level of 'Woorimatdag' breeder diets could be lowered to 2,700 kcal/kg without significantly influencing the laying performance of breeders or egg quality, fertility and hatchability, and chick weight.

• Journal of the Korean Society of Radiology
• /
• v.16 no.6
• /
• pp.673-680
• /
• 2022

In this study, based on PLA, we analyzed the Hounsfield Unit (HU) of materials containing 20% each of aluminum, wood, copper, carbon, and marble, and tried to analyze how they affect the image. A cylindrical phantom of 5×30×30 ㎣ (thickness×diameter×height) was fabricated using a entry-level 3D printer. The kV was changed to 80, 100 and 120, and the mAs was changed to 100 and 200 mAs, and the phantom in the center of the table was cross-scanned under a total of six conditions. A circular ROI was set using image J program and the quantification value of the material part HU and the quantification value of the peripheral part CNR were obtained. The HU average of the material part increased in the order of [PLA - wood 20%], [PLA - marble 20%], [PLA - carbon 20%], [PLA 100%], [PLA - aluminum 20%], [PLA - copper 20%] (p<0.05) a negative correlation was confirmed with the HU by increasing kV. It was confirmed that the CNR value in the peripheral area increased in the order of [PLA - marble 20%], [PLA - copper 20%], [PLA - carbon 20%], [PLA - wood 20%], [PLA - aluminum 20%], and [PLA - 100%] (p<0.05). Human organs with similar HU values for each material are [PLA - copper 20%] compact bone, [PLA - aluminum 20%] cancellous bone, [PLA 100%] coagulated blood, [PLA - carbon 20%] and [PLA - marble 20%] liver, muscle, spleen and [PLA - wood 20%] had similar values to fat. In addition, we confirmed the blur phenomenon that blurs the image around the filament with all materials, and confirmed that [PLA 100%] especially has the most blur around the filament. Therefore, it is considered desirable to reflect the HU value of the target organ and consider cloudiness around the phantom when selecting materials for medical phantom fabrication, and this research can provide basic data.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.25 no.1
• /
• pp.20-35
• /
• 2023

Chemical preservatives have a good effect on antibacterial activity, but many side effects on the human body have been reported. Recently, the development of natural preservatives that are harmless to the human body and have preservative functions and self-efficacy is active. In addition, in order to increase the absorption rate of natural products by the human body, the method of fermentation using strains is also increasing. Therefore, this study selected varieties that are harmless to the human body and have good antibacterial activity. 1. The yield of origin, thickness and solvent was investigated. Scutellaria baicalensis Georgi was made in China and received a yield of 21.88% from 50% ethyl alcohol extract. Salvia miltiorrhiza Bunge was made in Korea and received a yield of 25.62% from 50% ethyl alcohol extract. Dryopteris crassirhizoma Nakai was made in China and received a yield of 6.50% from 70% ethyl alcohol extract. 2. The solid fermentation with the S. baicalensis and S. miltiorrhiza with B. Subtilis yield gained 24.40%, 39.30%, and D. crassirhizoma obtained 11.10% yield when fermented with L. casei. 3. After the liquid fermentation, a clear zone of 9mm was identified for the S. aureus strain in the S. baicalensis, and the antibacterial activity was not confirmed in S. miltiorrhiza and D. crassirhizoma. 4. When the S. baicalensis was fermented with L. Casei, it showed high antibacterial activity in C. albicans and S. aureus. S. miltiorrhiza showed antibacterial activity in S. aureus when it was solid with S. cerevisiae. When the spectators were solid with L. casei and S. cerevisiae, antibacterial activity was high in E. coli and S. aureus. Overall, the antibacterial activity after fermentation was much higher than when fermented. 5. The change in active ingredients was baicalin 101.57, baicalein 28.26, and wogonin 5.33mg/g in the S. baicalensis that did not ferment solid. When solid fermentation with S. cerevisiae, the content of baicalinin with baicalin 94.31, baicalein 30.41, and wogonin 3.57mg/g was found to have increased. S. miltiorrhiza that was not fermented, salvianolic acid A was 1.82mg/g, and when fermented with S. cerevisiae, it increased to 5.70mg/g. The active ingredients of the spectators were flavaspidic acid AP, flavaspidic acid PB, flavaspidic acid AB, and flavaspidic acid BB.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.6
• /
• pp.71-82
• /
• 2006

One of the most popular pre-reinforcement methods of tunnel heading in cohesionless soils would be the fore-polling of grouted pipes, known as RPUM (reinforced protective umbrella method) or UAM (umbrella arch method). This technique allows safe excavation even in poor ground conditions by creating longitudinal arch parallel to the tunnel axis as the tunnel advances. Some previous studies on the reinforcing effects have been performed using numerical methods and/or laboratory-based small scale model tests. The complexity of boundary conditions imposes difficulties in representing the tunnelling procedure in laboratory tests and theoretical approaches. Full-scale study to identify reinforcing effects of the tunnel heading has rarely been carried out so far. In this study, a large scale model testing for a tunnel in granular soils was performed. Reinforcing patterns considered are four cases, Non-Reinforced, Crown-Reinforced, Crown & Face-Reinforced, and Face-Reinforced. The behavior of ground and pipes as reinforcing member were fully measured as the surcharge pressure applied. The influences of reinforcing pattern, pipe length, and face reinforcement were investigated in terms of stress and displacement. It is revealed that only the Face-Reinforced has decreased sufficiently both vertical settlement in tunnel heading and horizontal displacement on the face. Vertical stresses along the tunnel axis were concentrated in tunnel heading from the test results, so the heading should be reinforced before tunnel advancing. Most of maximum axial forces and bending moments for Crown-reinforced were measured at 0.75D from the face. Also it should be recommended that the minimum length of the pipe is more than l.0D for crown reinforcement.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.1
• /
• pp.18-25
• /
• 2022

Purpose: This study aimed to evaluate the color stability and antibacterial properties of the surface of polyethyl methacrylate (PEMA) resin with zirconia nanoparticles added. Materials and Methods: The control group was pure PEMA resin, and the experiment group was PEMA resin 15 mm in diameter and 2.5 mm in thickness disk-shaped specimens with 2, 4 and 8 w/v% of zirconia nanoparticles added, which were respectively divided into Group Z2, Group Z4, and Group Z8. After analyzing the surface roughness and color stability of the specimens, their antibacterial properties were evaluated using Porphyromonas gingivalis (P. gingivalis). The Statistical analysis was performed using when normality was met in the Shapiro-Wilk test, one-way ANOVA was used to test parameters, and Tukey's test was used as a post hoc test. When normality was not met, the Kruskal-Wallis test, a non-parametric test was used (P < 0.05). Results: The surface roughness measurement found that there was no significant difference between the experimental and control groups. The color stability evaluation showed that the Z2, Z4, and Z8 groups were within the color range of natural teeth. The adhesion of P. gingivalis was evaluated to be significantly reduced in Group Z2 compared to the control group (P < 0.05). In the Z2 group, Z4 group, and Z8 group, dead cells bacteria than the control group were observed. Conclusion: In conclusion, PEMA resin with zirconia nanoparticles added was within the range of natural teeth in color and reduced the adhesion of P. gingivalis.