• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.544-547
• /
• 2004

Glass frits for dielectric layers are mostly used for screen printing process. Several additives have already been known to be well matched with lead-oxide glasses system. The use of lead oxide, however, creates environmental problems, so many recent studies on lead-free glasses compositions have been carried out. A study of the suitability between additives and lead-free glass system is needed. In this study, we have used a screen-printing method to make thick films of lead-oxide glass and lead-free glass using different additives, and analyzed and compared the transmittance of the thick films.

• 공업화학
• /
• 제2권3호
• /
• pp.289-299
• /
• 1991

후막 구리도체에 적합한 유리를 얻기 위하여 연붕규산계 및 무연 붕규산계 유리를 기반으로 하는 9종의 유리를 제조하고 후막 구리도체에의 적합성을 시험하였다. 그 결과 모든 유리들이 후막 구리도체의 쉬트 저항치, 납땜성 및 땜납 침식저항에는 양호하게 기여하는 것을 확인하였다. 그러나 후막과 알루미나 기판간의 노화후의 부착강도는 연붕규산계 유리로 만들어진 구리 도체막 만이 유용한 값을 가졌고, 그 외의 유리로 만들어진 구리 도체막의 노화후 부착강도는 사용하기에 부적합할 정도로 낮은 것이었다. 특히 $Cu_2O$ 가 첨가된 연붕규산계 유리가 후막 구리도체 제조에 가장 양호한 것으로 확인되었다.

• 한국전기전자재료학회논문지
• /
• 제24권3호
• /
• pp.200-207
• /
• 2011

Abstract: The effect of lead free glass frit compositions on the properties of thick film conductor and resistor pastes were investigated. Two types lead free frits, HBF-A(without $Bi_2O_3$) and HBF-B(with $Bi_2O_3$) were made from $SiO_2$, $B_2O_3$, $Al_2O_3$, CaO, MgO, $Na_2O$, $K_2O$, ZnO, MnO, $ZrO_2$, $Bi_2O_3$. And Ag based conductor pastes and $RuO_2$ based resistor paste were prepared by mixed with these frits and functional phase(Ag and $RuO_2$), and organic vehicle. The properties of thick film conductor and resistor sintered at $850^{\circ}C$ were studied after printing on $Al_2O_3$ substrate. The morphology of the sintered films surface were SEM and EDS were carried out to analysis the chemical composition on resistor surface and state of Ru atom in frit matrix.

• 한국세라믹학회지
• /
• 제30권11호
• /
• pp.974-978
• /
• 1993

Glass viscosity effects on the electrical properties and microstructure of RuO2 based thick film resistors (TFR) using alumina modified lead borosilicate glasses were studied. AT 85$0^{\circ}C$, the glass viscosities were increased from 4.24Pa.s to 51.5Pa.s when the alumina was added from none to 14 weight percent to the standard glass of 63% PbO, 25% B2O3 and 12% SiO2. The resistivities of resistors were generally decreased and the microstructure development was retarded as the viscosity of the glass increased. This is contrary to the generally accepted thought that the low resistivity is due to fast microstructure development kinetics in TFR. Even though the glass viscosity retards the microstructure development kinetics, the overall network formations are favored for higher viscosity of glass, such that the sheet resistivities were decreased as the glass viscosity increased.

• 한국세라믹학회지
• /
• 제47권5호
• /
• pp.467-473
• /
• 2010

The objective of this study is to prepare lead-free thick film resistor (TFR) paste compatible with AlN substrate for hybrid microelectronics. For this purpose, CaO-ZnO-$B_2O_3-Al_2O_3-SiO_2$ glass system was chosen as a sintering aid of $RuO_2$. The effects of the weight ratio of CaO to ZnO in glass composition, the glass content and the sintering temperature on the electrical properties of TFR were investigated. $RuO_2$ as a conductive and glass powder were dispersed in an organic binder to obtain printable paste and then thick-film was formed by screen printing, followed by sintering at the range between $750^{\circ}C$ and $900^{\circ}C$ for 10 min with a heating rate of $50^{\circ}C$/min in an ambient atmosphere. The addition of ZnO to glass composition and sintering at higher temperature resulted in increasing sheet resistance and decreasing temperature coefficient of resistance. Using $RuO_2$-based resistor paste containing 40 wt%glass of CaO-20.5%ZnO-25%$B_2O_3$-7%$Al_2O_3$-15%$SiO_2$ composition, it is possible to produce thick film resistor on AlN substrate with sheet resistance of $10.6\Omega/\spuare$ and the temperature coefficient of resistance of 702ppm/$^{\circ}C$ after sintering at $850^{\circ}C$.

• 한국재료학회지
• /
• 제14권9호
• /
• pp.670-675
• /
• 2004

Glasses in the $Bi_{2}O_3-SiO_2-ZnO$ glasses system were examined as a potential replacement for lead-oxide glass frits with low firing temperature ($500\sim600^{\circ}C$) for the dielectric layer of a plasma display panel (PDP). The glasses were evaluated for glass transition temperature($T_{g}$) and thermal expansion coefficient(${\alpha}$). After forming transparent thick films by a screen-printing method, it was evaluated for the optical properties. The transmittance of thick films fired at $500-600^{\circ}C$ showed above $80\%$, which was not dependent on the firing temperature. As a result, many pores were observed at samples fired at low temperature, while the number of pores from samples prepared at high temperature decreased and the pores size increased.

• 한국결정성장학회지
• /
• 제9권1호
• /
• pp.50-54
• /
• 1999

플라즈마 디스플레이는 후막기술을 이용하여 화면의 크기를 늘리는 것이 쉽기 때문에 고선명 TV의 가장 유력한 후보이다. 본 연구에서는 플라즈마 디스플레이용 유전체의 조건을 만족하는 lead borosilicate 유리를 이용한 투명 유전체 재료를 개발하였다. 또한 이 유리를 이용하여 페이스트를 제조하였다. 페이스트는 스크린 프린팅에 적합한 요변성을 나타내었고, 입자 크기가 작아질수록 더욱 강한 요변성을 나타내었다. 열처리 후 후막의 파단면을 전자현미경으로 관찰하였다. 후막의 기공은 서로 다른 크기의 평균입경을 갖는 powder를 사용함으로써 제거 될 수 있었다. 소성된 후막은 좋은 융착 특성을 나타내었다.

• 전자공학회논문지A
• /
• 제29A권11호
• /
• pp.84-90
• /
• 1992

The dependence of electrical characteristics of RuO$_2$-based thick film resistors on the RuO$_2$ contents, glass composition variation and the firing temperatures was measured. The sheet resistance of resistors decreased as the contents of RuO$_2$ increased and at firing temperatures higher than C, the sheet resistance increased as the firing temperature increased. In case of using lead borosilicate glass-containing $Bi_{2}O_{3}$, the sheet resistance decreased as the contents of $Bi_{2}O_{3}$ increased. TCR changes from negative to positive values as RuO$_2$ contents increased and from positive to negative values as the firing temperature increased. TCR increased to positive values as $Bi_{2}O_{3}$ increased in the glass.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1998년도 PROCEEDINGS OF THE 15TH KACG TECHNICAL MEETING-PACIFIC RIM 3 SATELLITE SYMPOSIUM SESSION 4, HOTEL HYUNDAI, KYONGJU, SEPTEMBER 20-23, 1998
• /
• pp.79-83
• /
• 1998

Plasma display panel is a potential candidate for HDTV, due to the fact hat the expansion of screen size is much easier using thick film technology. In this study, transparent dielectric materials using lead borosilicate glasses is developed, which satisfy the requirements of dielectrics for PDP. Paste is made of this glass composition. The paste has thixotropic behavior suitable for screen printing. The paste shows more thixotropic behavior as the particle size decrease. After firing, cross sectional area was analyzed by SEM. The void of fired thick film was removed using bimodal particle system. The dielectric showed good adhesion characteristics.

• Nuclear Engineering and Technology
• /
• 제55권10호
• /
• pp.3709-3715
• /
• 2023

It is an important work to measure the dimensions of underwater spent fuel assemblies in the nuclear power industry during the overhaul, to judging whether the spent fuel assemblies can continue to be used. In this paper, a three dimensional reconstruction method for underwater spent fuel assemblies of nuclear reactor based on linear structured light is proposed, and the topography and size measurement was carried out based on the reconstructed 3D model. Multiple linear structured light sensors are used to obtain contour size data, and the shape data of the whole spent fuel assembly can be collected by one-dimensional scanning motion. In this paper, we also presented a corrected model to correct the measurement error introduced by lead-glass and water is corrected. Then, we set up an underwater measurement system for spent fuel assembly based on this method. Finally, an underwater measurement experiment is carried out to verify the 3D reconstruction ability and measurement ability of the system, and the measurement error is less than ±0.05 mm.