• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.488-491
• /
• 2011

금속 소재의 열구조 안정성을 파악하기 위해 고체연료 추진기관의 노즐에 대해 열구조 해석을 수행하였다. 금속 소재 노즐은 짧은 연소 시간이지만 고온, 고압의 연소가스에 직접 노출되어 열하중이 상당히 클 것으로 판단된다. 해석 결과를 통해 열하중의 영향을 예측하고 향 후 추력기 설계 자료로 이용하고자 한다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권4호
• /
• pp.425-431
• /
• 2015

선박의 LNG(liquefied natural gas) 연료 공급 시스템에서 천연가스는 $50^{\circ}C$의 온도와 35MPa의 압력을 가진 가스 상태로 기화기에서 엔진으로 이송되므로, 이러한 열 하중을 고려한 구조 안전성 평가가 반드시 필요하다. 본 연구에서는 먼저 재료에 미치는 열의 영향을 분석하기 위하여 이중 배관의 재료인 슈퍼 듀플렉스 스테인리스강의 어닐링 시간을 고려한 일축 인장 실험을 수행하였다. 또한 구조 안전성 평가를 위해, 현재 널리 사용되는 고정식 지지대를 가지는 고온-고압 이중 배관에 대한 열-구조 해석을 수행하였다. 지지대와 내관 사이의 응력 집중을 최소화하기 위하여, 내관을 따라 미끄러질 수 있는 슬라이딩 지지대의 새 형상들을 제안하였고, 열-구조 해석 결과를 통해 최적의 지지대를 제안하였다. 마지막으로 제안된 지지대를 사용한 전체 이중배관에 대한 해석을 통해 안전성을 평가하였다. 본 연구의 결과는 차후 LNG 연료 공급 시스템의 고온-고압 이중 배관 설계 시 참고자료로서 활용될 수 있으며, 이중 배관의 슬라이딩 지지대를 설계함에 있어서 그 활용가치가 있다고 판단된다.

• 대한조선학회논문집
• /
• 제53권5호
• /
• pp.410-419
• /
• 2016

With the aim of reducing greenhouse gas emissions by 20 percent by 2020 and by 50 percent by 2050 from their 2005 level, International Maritime Organization (IMO) regulated the emissions of SOx and NOx by setting the emission control area in 2012. Since these environmental regulations have been reinforced, demands for the LNG fuel ships are expected to increase dramatically. Accordingly, the worldwide shipbuilding companies spur the development of the LNG fueled ships. Therefore, it is essential to carry out the research on the development of LNG fuel tank, which is one of the important components of the LNG fuel supply system. In this study, the deliberate finite element analysis of type-B LNG fuel tank for 10,000 TEU containership was carried out to evaluate structural safety and provide the process for analyzing stress levels and evaluating fatigue life of target structural. In particular, thermo-structural analysis and fatigue analysis were carried out using the databases on materials and structures of LNG fuel tank.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.29-46
• /
• 1999

The performance based design obligates quantitative assessment of required performances by means of transparent and objective science. In this design scheme, simulation of both macro and micro-scale structural behaviors is thought to be a powerful tool. This paper proposes a way how to unify the structural safety and serviceability check method and durability assessment of RC structures. Though component chemical-physical processes are crudely assumed, system dynamics of micro-scale pore structure formation and macro-scale defects and deformation of structures was shown as possible and promising approach in future. The authors understand that the unification of structural and durability design has just started. For further progress and development, predictive tool of structural behaviors from birth to death of concrete under any specified environment and load serves as an essential technicality.

• International Journal of Aeronautical and Space Sciences
• /
• 제17권4호
• /
• pp.526-534
• /
• 2016

A MEMS solid propellant thruster array shall be operated within an allowable range of operating temperatures to avoid ignition failure by incomplete combustion due to a time delay in ignition. The structural safety of the MEMS thruster array under severe on-orbit thermal conditions can also be guaranteed by a suitable thermal control. In this study, we propose a thermal control strategy to perform on-orbit verification of a MEMS thruster module, which is expected to be the primary payload of the STEP Cube Lab mission. The strategy involves, the use of micro-igniters as heaters and temperature sensors for active thermal control because an additional heater cannot be implemented in the current design. In addition, we made efforts to reduce the launch loads transmitted to the MEMS thruster module at the system level structural design. The effectiveness of the proposed thermo-mechanical design strategy has been demonstrated by numerical analysis.

• Structural Monitoring and Maintenance
• /
• 제2권2호
• /
• pp.95-113
• /
• 2015

The knowledge of the behavior of any roller compacted concrete (RCC) dam and its foundation is gained by studying the service action of the dam and its foundation using measurements of an external and internal nature. The information by which a continuing assurance of structural safety of the RCC dam can be gauged is of primary importance. Similarly, the fact that the information on structural and thermal behavior and the properties of concrete that may be used to give added criteria for use in the design of future RCC dams is of secondary importance. Wide spread attention is now being given to the installation of more expensive instrumentation for studying the behavior of concrete dams and reservoirs and forecasting of any adverse trends. In view of this, the paper traces installation and need of the comprehensive instrumentation scheme implemented to monitor the structural and thermal behavior of 102.4 m high RCC dam constructed near Mumbai in India. An attempt is made in the present paper to emphasize the need to undertake an instrumentation program and evaluate their performance during construction and post construction stage of RCC structures. Few typical results, regarding the thermal and structural behavior of the dam, obtained through instrumentation installed at the dam site are presented and compared with the design considerations. The fair agreement is seen in the response observed through instrumentation with that governing the design criteria.

• 대한기계학회논문집A
• /
• 제39권4호
• /
• pp.447-451
• /
• 2015

본 연구의 목적은 유한요소 해석을 이용하여 항공기 엔진에 장착된 미세 튜브형 열교환기의 작동하중에 대한 특성을 파악하고 구조안전성을 평가하는 것이다. 작동 하중은 열-기계하중이 고려되었다. 항공기 엔진 부품의 특수성으로 인하여 구조적 강성확보뿐만 아니라 고효율, 저중량, 최소체적을 만족하는 형상 설계가 요구 된다. 브레이징한 미세튜브의 기계적물성치 확보를 위해 고온 인장 실험을 수행하였다. Ansys 12.1의 자체 모델러를 이용하여 형상을 모델링하고 유한요소해석을 수행하였다. 열-구조 연성해석을 통하여 튜브를 제외한 모듈형(modular type) 열교환기에 대한 설계방법을 제시하고 구조적 건전성을 평가하였다.

• Advances in Computational Design
• /
• 제1권1호
• /
• pp.105-117
• /
• 2016

The objective of this work is to study the restraining effect in fire resistance of framed structures and to evaluate the global response of reinforced concrete frames when exposed to fire based on advanced finite element method. To study the response a single portal frame is analyzed. The effect of floor slab on this frame is studied by modeling a beam-column-slab assembly. The evolution of temperature distribution, internal stresses and deformations of the frame subjected to ISO 834 standard fire curve for both the frames are studied. The thermal and structural responses are evaluated and a comparison of results of individual members and entire structure is done. From the study it can be seen that restraining forces has significant influence on both stresses and deflection and overall response of the structure when compared to individual structural member. Among the various structural elements, columns are the critical members in fire and failure of column causes the failure of entire structure. The fire rating of various structural elements of the frame is determined by various failure criteria and is compared with IS456 2000 tabulated fire rating.

• Structural Engineering and Mechanics
• /
• 제53권4호
• /
• pp.703-723
• /
• 2015

In this paper optimization of volume fraction distribution in a thick hollow cylinder with finite length made of two-dimensional functionally graded material (2D-FGM) and subjected to steady state thermal and mechanical loadings is considered. The finite element method with graded material properties within each element (graded finite elements) is used to model the structure. Volume fractions of constituent materials on a finite number of design points are taken as design variables and the volume fractions at any arbitrary point in the cylinder are obtained via cubic spline interpolation functions. The objective function selected as having the normalized effective stress equal to one at all points that leads to a uniform stress distribution in the structure. Genetic Algorithm jointed with interior penalty-function method for implementing constraints is effectively employed to find the global solution of the optimization problem. Obtained results indicates that by using the uniform distribution of normalized effective stress as objective function, considerably more efficient usage of materials can be achieved compared with the power law volume fraction distribution. Also considering uniform distribution of safety factor as design criteria instead of minimizing peak effective stress affects remarkably the optimum volume fractions.

• 한국항공우주학회지
• /
• 제43권5호
• /
• pp.432-439
• /
• 2015

MEMS 고체 추력기 모듈은 MEMS 고체 추력기와 MEMS 추력기 제어보드로 구성된다. MEMS 고체 추력기는 학문적 연구개발 목적으로 개발되었기 때문에 발사환경을 고려한 설계 및 시험이 이루어지지 않아 이를 큐브위성에 탑재 및 궤도검증을 위해서는 설계 시 추력기 모듈로의 발사 하중이 최소화 되도록 하는 위성체 시스템 레벨에서의 설계노력이 요구된다. 본 논문에서는 MEMS 고체 추력기의 조립 및 시험과정에서의 탈장착 용이성 및 발사환경에서의 구조건전성 확보를 위해 브래킷을 이용한 구조설계를 제안하였으며, 준정적해석과 랜덤해석 및 진동시험을 통해 설계의 유효성을 검증하였다. 또한, 본 논문에서 제안한 스프링 핀을 이용한 MEMS 추력기와의 전기적 체결방식은 발사 진동에서의 구조건전성 확보에 유효함을 입증하였다.