• Journal of the Optical Society of Korea
• /
• 제12권3호
• /
• pp.152-156
• /
• 2008

This paper reports a fiber-optic temperature sensor using a single mode fused fiber coupler incorporating a thermo-optic external medium. The spectral transmission was altered by changing the refractive index of the external thermo-optic medium. A theoretical and experimental investigation was carried out with the aim of achieving high sensitivity. The measured sensitivity for the environmental temperature was as high as -1.5 $nm/^{\circ}C$.

• 센서학회지
• /
• 제22권2호
• /
• pp.95-99
• /
• 2013

We proposed and demonstrated a fiber optic sensor for detecting the thermo-optic coefficient of a liquid, based on a cascade of two different FBGs. One of the two FBGs was etched, and its cladding was removed, for evanescent wave coupling with an external liquid. The Bragg wavelength of the non-etched FBG was used as a reference for the temperature of the surrounding liquid. The refractive index (RI) and thermo-optic (T-O) coefficient of a liquid can be detected from the difference between the Bragg wavelengths of the two FBGs, and the variation of the difference in accordance with temperature.

• International Journal of Aeronautical and Space Sciences
• /
• 제3권2호
• /
• pp.24-30
• /
• 2002

This paper demonstrates a comparison of linear and nonlinear analyses for thermo-optic effects of optical temperature sensor based on the etched silica-based planar waveguide Bragg grating. Topics include theoretical analyses and experiment of the etched planar waveguide Bragg grating optical temperature sensor. Theoretical models with nonlinear than linear temperature effect for the grating response based on waveguide and plate deformation theories agree with experiments to within acceptable tolerance.

• 센서학회지
• /
• 제15권4호
• /
• pp.263-268
• /
• 2006

We have demonstrated a highly sensitive temperature sensor using an etched single mode fiber with a thermally expanded core region. Large core size of thermally expanded core facilitates access to evanescent wave by the wet etching. The etched region was surrounded by a low dispersive external medium with high thermo-optic coefficient. Due to the large difference between the dispersion property of the fiber and that of the external medium, the device reveals a cut-off properties at spectral region. The cut-off wavelength was shifted by the variations of the environmental temperatures because of thermo-optic effect of the external medium. The sensitivity of the fabricated device was found to be $45nm/^{\circ}C$.

• 한국정보통신학회논문지
• /
• 제10권11호
• /
• pp.2049-2054
• /
• 2006

본 연구는 에칭된 실리카 기반의 평면 도파로 Bragg grating에 기반한 광 온도센서의 열전 광 효과에 대한 선형 및 비선형 해석에 대하여 제시하였다. 또한, 에칭된 평면 도파로 Bragg grating 광 온도센서의 이론적인 해석과 실험을 행하고 그 결과를 나타내었다. 도파로에 기반한 grating응답에 대하여 선형 온도 효과보다 비선형의 이론적 모델과 plate deformation이론이 허용오차 범위 내에서의 실험치와 일치함을 알 수 있었다.

• Journal of the Optical Society of Korea
• /
• 제17권3호
• /
• pp.231-236
• /
• 2013

We present both theoretically and experimentally the thermo-optic characteristics of micro-structured optical fiber (MOF) filled with mixed liquid. The performance of MOF depends on the efficient interaction between the fundamental mode of the transmitted light wave and the tunable thermo-optic materials in the cladding. The numerical simulation indicates that the confinement loss of MOF presents higher temperature dependence with higher air-filling ratios $d/{\Lambda}$, longer incident wavelength and fewer air holes in the cladding. For the 4cm liquid-filled grapefruit MOF, we demonstrate from experiments that different proportions of solutions lead to tunable temperature sensitive ranges. The insertion loss and the extinction ratio are 3~4 dB and approximate 20 dB, respectively. The proposed liquid-filling MOF will be developed as thermo-optic sensor, attenuator or optical switch with the advantages of simple structure, compact configuration and easy fabrication.

• 한국광학회지
• /
• 제13권6호
• /
• pp.467-472
• /
• 2002

본 논문에서는 측면연마 광섬유 결합기 구조에서 평면 도파로의 상부와 하부 클래딩의 열광학 효과를 이용하여 온도를 측정할 수 있는 편광 무의존 온도 센서를 제안하고 있다. 평면 도파로는 170$\mu\textrm{m}$ 두께의 현미경용 덮게 유리를 적용함으로서 급격한 온도 변화에 대해 도파로의 변형이 발생하지 않고, 비대칭적 평면 도파로 구조로 인한 편광 의존 손실을 최소화하기 시킬 수 있는 장점을 가진다. 제작된 소자의 편광 의존 손실은 0.3dB 이하로 측정되었다. 피측정체의 온도는 센서의 결합 파장 이동으로부터 계측되어진다. 평면 도파로의 상부와 하부 클래딩의 열광학 계수에 따른 온도 센서의 온도 민감도를 측정하였고, 상ㆍ하부 클래딩의 열광학 계수 변화로 온도 민감도를 제어할 수 있음을 보였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.203-206
• /
• 2003

Thermo-optic tunable filter, with 4-pairs of H/L layers for DBR, was designed and fabricated. The transmittance characteristics of the filter were measured. Additionally, heating system and temperature sensor system were used in order to observe property of the filter by thermo-optic effect. The tuning efficiency of the filter was measured to be 0.144nm/K$^{-1}$ showing the tuning range of 9.4nm for the temperature variation of 64.7$^{\circ}C$. Filter, lens and fiber were aligned by micro-optical bench.

• 대한전자공학회논문지SD
• /
• 제41권10호
• /
• pp.57-62
• /
• 2004

단일 모드 광섬유의 측면을 일부분 연마하여 연마된 상부에 열 광학 폴리머 층과 금속열선을 형성한 광섬유형 전류센서를 보고한다. 금속 열선에 인가된 전류에 의해서 발생하는 저항열은 폴리머 층의 굴절률을 변화시키고 광섬유의 소산장을 통한 광 감쇄를 유도하게 된다 두 가지 유형의 센서구조를 제안하였고 전류센서로서의 특징을 조사하였다.

• 센서학회지
• /
• 제14권3호
• /
• pp.180-185
• /
• 2005

In this study, a plastic fiber-optic temperature sensor is fabricated using TSCM(thermo sensitive clouding material) which changes its light transmittance with temperature and the characteristics of this sensor are evaluated. The fabricated fiber optic temperature sensor is the reflector type using a Y-coupler. The optimum light source and reflector are decided by measuring the amount of reflected light through TSCM. Also, the optimum distance from the end of sensor to the surface of reflector is determined. Then the relationship between the amount of measured reflected light and the temperature of TSCM is found.